Pheromone communication and the mushroom body of the ant, Camponotus obscuripes (Hymenoptera: Formicidae)

Communication by means of pheromones plays predominant roles in colony integration by social insects. However, almost nothing is known about pheromone processing in the brains of social insects. In this study, we successfully applied intracellular recording and staining techniques to anatomically and physiologically characterize brain neurons of the ant Camponotus obscuripes. We identified 42 protocerebral neurons that responded to undecane and/or formic acid, components of alarm pheromones that evoke attraction or evasive behavior, respectively. Notably, 30 (71%) of these neurons were efferent (output) or feedback neurons of the mushroom body, and many of these exhibited different responses to formic acid and undecane. Eight of the remaining 12 neurons had arborizations in the lateral and/or medial protocerebrum, which receive terminations of efferent neurons of the mushroom body and from which premotor descending neurons originate. The remaining four neurons were bilateral neurons that connect lateral accessory lobes or dorsal protocerebrums of both hemispheres. We suggest that the mushroom body of the ant participates in the processing of alarm pheromones. Seventeen (40%) of 42 neurons exhibited responses to nonpheromonal odors, indicating that the pheromonal and nonpheromonal signals are not fully segregated when they are processed in the protocerebrum. This may be related to modulatory functions of alarm pheromones, i.e., they change alertness of the ant and change responses to a variety of sensory stimuli.     

Effectiveness of resistivity monitoring for interpreting temporal changes in landfill properties

It is always possible for impermeable layers to exist in landfills. When they do, the properties of the solution at the exit of the leachate-collection system might not accurately reflect the overall properties of the landfill. This study examines whether resistivity monitoring is effective for determining the influence of impermeable layers on the leachate. The test cell used in this study was filled with waste made up mainly of incinerator ash and shredded incombustible material. Three lines of resistivity sensors were laid in the uppermost layer of the fill. A resistivity profile was recorded periodically from each of these lines. The water-table level and leachate properties were measured concurrently. Leachate conductivity was mainly controlled by concentrations of the main ions, and it correlated inversely to variations in resistivity. Temporal changes in the resistivity of the fills are an excellent means of assessing the leaching in fills. Monitoring the properties of leachate, combined with resistivity profiling, is extremely useful for interpreting the temporal changes of properties in landfills containing impermeable layers.     

Utilizing international networks for accelerating research and learning in transformational sustainability science

A promising approach for addressing sustainability problems is to recognize the unique conditions of a particular place, such as problem features and solution capabilities, and adopt and adapt solutions developed at other places around the world. Therefore, research and teaching in international networks becomes critical, as it allows for accelerating learning by sharing problem understandings, successful solutions, and important contextual considerations. This article identifies eight distinct types of research and teaching collaborations in international networks that can support such accelerated learning. The four research types are, with increasing intensity of collaboration: (1) solution adoption; (2) solution consultation; (3) joint research on different problems; and (4) joint research on similar problems. The four teaching types are, with increasing intensity of collaboration: (1) adopted course; (2) course with visiting faculty; (3) joint course with traveling faculty; and (4) joint course with traveling students. The typology is illustrated by extending existing research and teaching projects on urban sustainability in the International Network of Programs in Sustainability, with partner universities from Europe, North America, Asia, and Africa. The article concludes with challenges and strategies for extending individual projects into collaborations in international networks.     

Evaluation of a recycling process for printed circuit board by physical separation and heat treatment

Printed circuit boards (PCBs) from discarded personal computer (PC) and hard disk drive were crushed by explosion in water or mechanical comminution in order to disintegrate the attached parts. More parts were stripped from PCB of PC, composed of epoxy resin; than from PCB of household appliance, composed of phenol resin.In an attempt to raise the copper grade of PCB by removing other components, a carbonization treatment was investigated. The crushed PCB without surface-mounted parts was carbonized under a nitrogen atmosphere at 873–1073 K. After screening, the char was classified by size into oversized pieces, undersized pieces and powder. The copper foil and glass fiber pieces were liberated and collected in undersized fraction. The copper foil was liberated easily from glass fiber by stamping treatment.As one of the mounted parts, the multi-layered ceramic capacitors (MLCCs), which contain nickel, were carbonized at 873 K. The magnetic separation is carried out at a lower magnetic field strength of 0.1 T and then at 0.8 T. In the +0.5 mm size fraction the nickel grade in magnetic product was increased from 0.16% to 6.7% and the nickel recovery is 74%.The other useful mounted parts are tantalum capacitors. The tantalum capacitors were collected from mounted parts. The tantalum-sintered bodies were separated from molded resins by heat treatment at 723–773 K in air atmosphere and screening of 0.5 mm. Silica was removed and 70% of tantalum grade was obtained after more than 823 K heating and separation.Next, the evaluation of Cu recycling in PCB is estimated. Energy consumption of new process increased and the treatment cost becomes 3 times higher comparing the conventional process, while the environmental burden of new process decreased comparing conventional process.The nickel recovery process in fine ground particles increased energy and energy cost comparing those of the conventional process. However, the environmental burden decreased than the conventional one.The process for recovering tantalum used more heat for the treatment and therefore the energy consumption increased by 50%, when comparing with conventional process. However, the market price for tantalum is very large; the profit for tantalum recovery is added. Also the environmental burden decreased by the recycling of tantalum recovery. Therefore, the tantalum recovery is very important step in the PCB recycling. If there is no tantalum, the consumed energy and treatment cost increase in the new process, though the environmental burden decreases.     

Influence of oxygen flow rate on reaction rate of organic matter in leachate from aerated waste layer containing mainly incineration ash

It is known that aeration reduces rapidly the concentration of organic matter in leachate. However, the oxygen flow rate required to attain a certain reaction rate of organic matter should be carefully estimated. In this study, using the oxygen ratio (the ratio of oxygen flow rate by aeration to oxygen consumption rate of waste layer) as a parameter, the reaction rate of organic matter in leachate from landfilled incineration ash and incombustible waste upon aeration was evaluated. Total organic carbon (TOC) in the leachate was reduced rapidly when the oxygen ratio was high. The decomposition rate exceeded the elution rate of TOC in the leachate from the waste layer for several days when the oxygen ratio was above 10². The results indicate that the oxygen ratio can be used as a parameter for the aeration operation in actual landfill sites, to rapidly stabilize organic matter in leachate.     

Decolorization of oxygen-delignified bleaching effluent and biobleaching of oxygen-delignified kraft pulp by non-white-rot fungus Geotrichum candidum Dec 1

Decolorization of oxygen-delignified bleaching effluent (abbreviated as OBE) and biobleaching of oxygen-delignified kraft pulp (OKP) were conducted using a non-white rot fungus Geotrichum candidum Dec 1 (abbreviated as Dec 1) which has ability to decolorize various synthetic dyes and molasses. Dec 1 decolorized up to 77% of OBE for 6 days. In addition, Dec 1 increased the brightness of OKP from 47.8% to 51.2% and decreased the kappa value of OKP from 12.4 to 10.4 points during a 6-day incubation period at a 25% of pulp-concentration. At 2% pulp-concentration, the brightness of OKP increased by 13% and the kappa value of OKP decreased by 4 points only for a 3-day incubation period. When the decolorized OBE was used for bleaching of OKP, the brightness of OKP increased to 62.7% under the shaking culture to a 2% pulp-concentration using culture fluid of decolorized OBE. It was revealed that Dec 1 is a potential to apply for decolorization of wastewater and biobleaching of pulp in paper-mills.     

Male scent-marking pheromone of <Emphasis Type="Italic">Bombus ardens ardens</Emphasis> (Hymenoptera; Apidae) attracts both conspecific queens and males

To explore the role of the volatiles emitted from male labial gland (LG) of the bumblebee Bombus ardens ardens, we investigated the responses of virgin queens and males to volatiles using a gas chromatography–electroantennographic detector (GC–EAD) system and Y-tube olfactometer. GC–EAD analysis revealed that citronellol, the main compound detected in the male LG, caused clear electrophysiological responses in the antennae of B. a. ardens virgin queens and males although two minor compounds elicited antennal responses when applied in a high concentration. Behavioral tests using a Y-tube olfactometer showed that queens and males were significantly attracted to both LG extracts and citronellol more than to the solvent alone. This is the first study to demonstrate that citronellol as a major compound of male scent-marking pheromone in B. a. ardens functions as a sex attractant for queens. The results also suggest that this compound has another function as a trail marker used by males.     

Evaluation of environmental feasibility of steel pipe sheet pile cutoff wall at coastal landfill sites

An evaluation method that can express the local leakage of leachate from joint sections in steel pipe sheet pile (SPSP) cutoff walls is discussed in this study. In particular, the evaluation of environmental feasibility (containment of leachates containing toxic substances) considering a three-dimensional arrangement and hydraulic conductivity distribution of the joint sections in the SPSP cutoff wall is compared with an evaluation that uses the equivalent hydraulic conductivity. This equivalent hydraulic conductivity assumes that the joint section and the steel pipe are integrated; therefore, the hydraulic conductivity is substituted with a uniform permeable layer. However, in an evaluation that employs the equivalent hydraulic conductivity, it is difficult to consider the local leakage of leachate containing toxic substances from the joint sections in the SPSP cutoff wall. It was established that evaluations of the environmental feasibility of SPSP cutoff walls with joint sections must take into account the local leakage of leachates containing toxic substances from the joint sections. Also, it was clarified that technologies that lower the hydraulic conductivities of joint sections in SPSP cutoff walls and also facilitate the use of sparser joint arrangements contribute significantly to increasing the environmental feasibility of SPSP cutoff walls at landfill sites.     

Extraction of raw sewage sludge containing iron phosphate for phosphorus recovery

The objective of the present study was to establish an alkali extraction technology for FePO₄-containing sewage sludge obtained from a wastewater treatment system that includes phosphorous removal by iron electrolysis. By clarifying the extraction properties of phosphorous, organic matter, and inorganic matter, conditions for alkali extraction were optimized. As a result, it was suggested that unheated phosphorous extraction would be superior for FePO₄-containing sewage sludge. And, extraction methods and sewage sludge properties were also compared, and the noteworthy result that extraction of metals can be suppressed to extremely low amounts with alkali extraction as compared with acid extraction was obtained. A new insight was also gained that, as compared with the use of incinerated ash reported in previous studies, alkali extraction was more efficient when raw sewage sludge was used.