Reducing surface water pollution through the assessment of the cost-effectiveness of BMPs at different spatial scales

Two kinds of agricultural Best Management Practices (BMPs) were examined with respect to cost-effectiveness (CE) in reducing sediment, nitrates-nitrogen (NO₃–N) and total phosphorus (TP) losses to surface waters of the Arachtos catchment in Western Greece. The establishment of filter strips at the edge of fields and a non-structural measure, namely fertilization reduction in alfalfa, combined with contour farming and zero-tillage in corn and reduction of animal numbers in pastureland, were evaluated. The Soil and Water Assessment Tool (SWAT) model was used as the non-point-source (NPS) estimator, while a simple economic component was developed estimating BMP implementation cost as the mean annual expenses needed to undertake and operate the practice for a 5-year period. After each BMP implementation, the ratio of their CE in reducing pollution was calculated for each Hydrologic Response Unit (HRU) separately, for each agricultural land use type entirely and for the whole catchment. The results at the HRU scale are presented comprehensively on a map, demonstrating the spatial differentiation of CE ratios across the catchment that enhances the identification of locations where each BMP is most advisable for implementation. Based on the analysis, a catchment management solution of affordable total cost would include the expensive measure of filter strips in corn and only in a small number of pastureland fields, in combination with the profitable measure of reducing fertilization to alfalfa fields. When examined for its impact on river loads at the outlet, the latter measure led to a 20 tn or 8% annual decrease of TP from the baseline with savings of 15€/kg of pollutant reduction. Filter strips in corn fields reduced annual sediments by 66 Ktn or 5%, NO₃–N by 71 tn or 9.5% and TP by 27 tn or 10%, with an additional cost of 3.1 €/tn, 3.3 €/kg and 8.1 €/kg of each pollutant respectively. The study concludes that considerable reductions of several pollutant types at the same time can be achieved, even at low total cost, by combining targeted BMP implementation strategies only in small parts of the catchment, also enabling policy makers to take local socio-economic constraints into consideration. The methodology and the results presented aim to facilitate decision making for a cost-effective management of diffuse pollution by enabling modelers and researchers to make rapid and reliable BMP cost estimations and thus being able to calculate their CE at the local level in order to identify the most suitable areas for their implementation.     

Sources of priority substances entering an urban wastewater catchment--trace organic chemicals

The implementation of new legislation such as the Water Framework Directive (WFD) requires Member States to gain a better understanding of priority substances entering surface waters. This will include inputs from wastewater treatment works as well as from other urban, industrial and agricultural sources. There is currently a lack of available data regarding the magnitude and sources of organic priority substances entering treatment works. As a consequence the concentrations of organic priority substances including PAHs, surfactants, polybrominated diphenylethers (PBDEs), diethylhexyl phthalate (DEHP), pesticides and solvents were determined in the wastewater from an urban catchment located in the UK, as part of a project undertaken for UK Water Industry Research (UKWIR). Most organic priority substances were detected in the microg/l range. Significant variations in the concentration of linear alkylbenzene sulphonate (LAS), DEHP, PBDEs and nonylphenol ethoxylates (NPEOs), in particular, were observed for the different sources. The greatest differences were evident between new and older domestic discharges. Solvent levels varied considerably reflecting use and production within the catchment. Chloroform levels were highest in domestic effluent, while trichloroethene and tetrachloroethene were detected only in commercial samples.     

Cross‐sectional epidemiological study on the lead burden of children and workers in Greece

Exposure of the general population to lead in the environment is mainly caused by motor traffic exhaust and by industrial pollution. The aim of the study in Greece was to assess lead exposure in children living in point source impacted areas (Lavrion and Aspropyrgos‐Eleusis) using the biological monitoring parameter “blood lead concentration”;.

In addition, workers of a lead smelter, a battery plant and an oil refinery were investigated in these areas at the same time.

Five hundred and thirty‐four children and 105 workers took part in this investigation.

The highest blood lead levels (mean: 24.16 μg/100ml; range: 10.40–60.49 μg/100 ml) were found in children living in a 500m‐area around the lead smelter at Lavrion. Blood lead decreases corresponded to the increasing distance from the emitter. Nevertheless the values of children living in a 1500 m distance to the smelter are significantly higher than those of children living next to other kinds of industrial lead sources.

The mean values of the children living in the two industrial towns were manifold higher than those of the control group.

The blood lead levels of the investigated workers did not exceed the German BAT‐value (Biologischer Arbeitsstoff‐Toleranzwert) of 70 μg/100ml.     

Levels of dioxins, furans and PCBs in human serum and milk of people living in Greece

In an attempt to evaluate the background levels of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), non-ortho, mono-ortho and indicator polychlorinated biphenyls (PCBs) in people living in an urban (Athens) and a rural (Kozani) area of Greece, blood serum and mother milk samples were analyzed. Analytical results are reported in this study. Statistically significantly differences were observed between regions, sexes and ages. Contamination levels in blood and human milk from Greece reported here are low compared to the previously reported dioxin data from other European countries and give no indication of particular health risk.     

Diffuse sources of heavy metals entering an urban wastewater catchment

New legislation such as the Water Framework Directive (WFD) will require Member States to better understand the concentrations and loads of contaminants entering surface waters. This will include inputs from wastewater treatment plants (WWTP) as well as from other urban, industrial and agricultural sources. A review of available literature revealed a shortage of data on the levels and sources of heavy metals entering WWTP from urban sources. As a consequence, the concentrations of heavy metals (cadmium, chromium, copper, mercury, nickel, lead and zinc) were determined in the wastewater from an urban catchment located in the UK, as part of a project undertaken for UK Water Industry Research (UKWIR). Both foul and surface water samples were taken. Metal concentrations varied considerably in the foul water samples, both between sources and over the course of the week. Concentrations of most metals were higher in the Monday town centre samples, attributed to leaching from stagnant water remaining in the pipework of office buildings over the weekend. Runoff concentrations were higher in the light industrial estate samples than in the domestic samples for all the metals, and exhibited highest levels in the 'first flush' samples, coincident with the initial flow of runoff containing the highest concentrations of suspended solids.     

Health risks for residents and neighbours of a shut down industrial waste site

An epidemiologic study of residents and neighbours of a shut down industrial waste site in Bielefeld‐Brake determined an increase of the transaminases GOT, GPT, gamma‐GT. Waste muds of metal‐working industries, carbide, and marble mud, as well as domestic rubbish were deposited on the industrial waste site. After its shut down the site was filled up with rubble and a residential area was built on. During the building activities gas production was observed and soil analysis proved highly increased concentrations of lead, cadmium, mercury, copper, zinc, and chrome‐nickel. The soil‐air analysis resulted in high values of trichloroethene and tetrachloroethene.     

Cross‐sectional epidemiological study on arsenic excretion in urine of children and workers in Greece

An investigation was undertaken to study the exposure of children in areas with different air pollution and of adults working in three different plants (lead processing, battery plant, oil refinery) using arsenic in urine as a biological parameter. The arsenic excretion of the children are in agreement with the air pollution in the investigated areas. The workers in the lead processing plant are found to have the highest urine excretion values of the three worker collectives. The mean excretion values is nearly ten times higher than that found in the normal population.