Magnetic resonance image findings of placental lake: report of two cases

Two cases with a large cystic mass within the placenta are reported. By ultrasonography, it was found that both women had a subchorionic hypoechoic lesion (11.0 × 4.8 × 4.0 cm and 6.6 × 3.7 × 2.2 cm, respectively) at 24 and 35 weeks of gestation, respectively. In both cases, turbulent blood flow generated by a pulsatile jet flow (pulse rate; 40 to 60 beats per minute) into the cystic lesion seen on real-time imaging and lesions being low intensity on T1-weighted and isointensity on T2-weighted magnetic resonance image suggested that they contained fresh maternal blood. In both cases, the sonolucency of the lesions did not change until cesarean deliveries of females, both of whom were small-for-gestational-age infants (1940 g at 37 weeks and 2195 g at 37 weeks, respectively). Biochemical analysis of the fluid in the cystic lesion sampled during the cesarean section in the latter case confirmed that the fluid had originated from the maternal blood. These lesions histologically corresponded to large avillous areas surrounded by normal villi. Thus, a huge placental lake was diagnosed in both cases. Copyright © 2005 John Wiley & Sons, Ltd.     

Initial design process of the sustainability science ontology for knowledge-sharing to support co-deliberation

Implementation of the sustainability science (SS) approach is often difficult because of poor communication between experts from different academic fields. We focused on ontology engineering as a method of knowledge structuring that supports the co-deliberation process. However, SS is too broad for a few experts to construct an ontology because SS targets and covers almost all existing research fields from the viewpoint of problem-solving. The N-iteration process is required for completing an SS ontology. In the present paper, we discuss the initial design process for constructing an ontology on SS from the aspect of a knowledge-sharing tool to support co-deliberation. First, we identified the SS ontology by referring to the existing literature. Second, we traced the structuring process of the SS ontology, which is independent of the existing research domain. Third, we compared the SS ontology with existing ontologies or concept structures on SS. Fourth, we assessed the SS ontology produced in the initial process in terms of relevance and coverage and addressed areas for improvement in order to facilitate co-deliberation among researchers from different domains. As a result of developing the SS ontology and applying it to the mapping tool that we developed based on the ontology, we found the following three points: the SS ontology enables us to define concepts relevant to SS without overlapping by distinguishing part-of and attribute-of relationships at the upper level of the ontology; the SS-based mapping tool successfully represents the potential countermeasures required by the targeted problem for all scientific fields except experimental engineering; however, the SS ontology requires further improvement in order to represent the conceptual linkage arising from compound and secondary problems and the fulfillment of classes at the lower hierarchy of Shortage problem, and requires slots for the entire hierarchy. In addition, based on the discussion of the areas for improvement, we found that missing slots and classes should be added in the process in which we use or improve tools corresponding to a variety of requirements for supporting co-deliberation. In this way, we are able to propose an incremental process for constructing the SS ontology from the aspect of a knowledge-sharing tool to support co-deliberation.     

Immobilization of tritiated water by hydrothermal hot-pressing

Tritium is generally disposed of as an oxide form, and immobilization of tritium oxide with Portland cement is the most popular disposal method. However, the cement solidified body is rather leachable for tritium and is poor in some physical properties. A silicate powder, such as borosilicate glass powder, forms a synthetic rock by the hydrothermal hot-pressing (HHP) technique, making it a technique for immobilization of tritium oxide. Tritium oxide with borosilicate glass powder was solidified by the HHP technique. Leachability of tritium from the produced solidified bodies and the behavior of fixed tritium oxide during the heating were studied and discussed. The amount of tritium oxide fixed by the present procedure was almost the same as that fixed by the ordinary cement solidifying procedure. The diffusivity of tritium from the body by this procedure was much lower than that from the cement body and the compressive strength of the body was higher than that of the cement body.     

The individual and cumulative effect of brominated flame retardant and polyvinylchloride (PVC) on thermal degradation of acrylonitrile-butadiene-styrene (ABS) copolymer

Acrylonitrile-butadiene-styrene (ABS) copolymers without and with a polybrominated epoxy type flame retardant were thermally degraded at 450 degrees C alone (10 g) and mixed with polyvinylchloride (PVC) (8 g/2 g). Gaseous and liquid products of degradation were analysed by various gas chromatographic methods (GC with TCD, FID, AED, MSD) in order to determine the individual and cumulative effect of bromine and chlorine on the quality and quantity of degradation compounds. It was found that nitrogen, chlorine, bromine and oxygen are present as organic compounds in liquid products, their quantity depends on the pyrolysed polymer or polymer mixture. Bromophenol and dibromophenols were the main brominated compounds that come from the flame retardant. 1-Chloroethylbenzene was the main chlorine compound observed in liquid products. It was also determined that interactions appear at high temperatures during decomposition between the flame retardant, PVC and the ABS copolymer.     

Spatio-temporal variations in the diet and stable isotope composition of the Argentine hake <Emphasis Type="Italic">Merluccius hubbsi</Emphasis> Marini, 1933 of the continental shelf of southeastern Brazil

The feeding ecology of Merluccius hubbsi was investigated in 2 regions of SE Brazil. The major food sources for the hakes were fish, crustaceans, and squid. In the upwelling system of Cabo Frio, the diet was very similar in the summers of 2001/2002 and spring 2002; fish were the most important prey followed by crustaceans. In Ubatuba, euphausiids were an important prey during the winter 2001 (100 m), while in the summer 2002, fish and amphipods predominated in the diet in the shallower site (40 m) and squid in the deeper site (100 m). The hakes showed temporal differences in stable isotope signatures in both regions, while C:N ratios varied only in Cabo Frio. δ¹⁵N and δ¹³C (bulk and corrected for lipid content) increased with fish length, which seems to be related to the increasing importance of fish and decreasing importance of euphausiids and amphipods in the diet of larger hakes. The mean trophic level of 3.7 for M. hubbsi was estimated using δ¹⁵N of bivalves as baseline and the fractionation of 3.4‰ between trophic levels.     

Spatial distribution and loading amounts of particle sorbed and dissolved perfluorinated compounds in the basin of Tokyo Bay

In this study, we analyzed over 30 types of PFCs, including precursors in both the dissolved phase and particle solid phase, in 50 samples of river water collected from throughout the Tokyo Bay basin. PFCs were detected in suspended solids (SSs) at levels ranging from <0.003-4.4 ng L(-1) (0.11-2470 ng g(-1) dry weight). The concentrations of PFCs in the SS were one to two order(s) of magnitude lower than those of PFCs in the dissolved phase. Relatively high levels of PFCs (total of 35 PFCs) in SS were observed in urbanized areas. The concentration of PFCAs, including PFOA and PFNA, were significantly correlated with the geographic index as artificial area (R(2) of the linear regression curve in a double logarithmic plot: 0.09-0.55). Conversely, PFOS and FOSA were significantly correlated with the arterial traffic area (R(2) in a double logarithmic plot: 0.29-0.55). Those spatial trends were similar to the trends in dissolved PFCs. We estimated the loading amount of PFCs into Tokyo Bay from six main rivers and found that more than 90% of the total PFCs reached Tokyo Bay in the dissolved phase. However, 40.0-83.5% of the long chain PFCAs (C12-C15), were transported as particle sorbed PFCs. Rain runoff events might increase the loading amount of PFCs in SS. Overall, the results presented herein indicate that greater attention should be given to PFCs, especially for longer chain PFCs in SS in addition to dissolved PFCs.     

Effect of decabromodiphenyl ether and antimony trioxide on controlled pyrolysis of high-impact polystyrene mixed with polyolefins

The controlled pyrolysis of polyethylene/polypropylene/polystyrene mixed with brominated high-impact polystyrene containing decabromodiphenyl ether as a brominated flame-retardant with antimony trioxide as a synergist was performed. The effect of decabromodiphenyl ether and antimony trioxide on the formation of its congeners and their effect on distribution of pyrolysis products were investigated. The controlled pyrolysis significantly affected the decomposition behavior and the formation of products. Analysis with gas chromatograph with electron capture detector confirmed that the bromine content was rich in step 1 (oil 1) liquid products leaving less bromine content in the step 2 (oil 2) liquid products. In the presence of antimony containing samples, the major portion of bromine was observed in the form of antimony bromide and no flame-retardant species were found in oil 1. In the presence of synergist, the step 1 and step 2 oils contain both light and heavy compounds. In the absence of synergist, the heavy compounds in step 1 oil and light compounds in step 2 oils were observed. The presence of antimony bromide was confirmed in the step 1 oils but not in step 2 oils.     

Effect of polyethylene addition to coal on hydrogasification enhancement

Hydrogasification of a coal/polyethylene mixture was carried out using a low concentration of polyethylene in the samples with the aim of industrial application. Coal/polyethylene mixtures in the ratio of 90:10 and 75:25 were used in this study. A hydrogasification experiment was conducted using a unique batch reactor at 1073 K under a 7.1 MPa hydrogen atmosphere. The reaction time varied from 1 to 80 s. The results revealed a methane yield from the mixtures that was noticeably greater than the values calculated from experimental results obtained from coal and polyethylene respectively, assuming no mutual influences. A significant synergistic effect was observed even when the polyethylene content was as low as 10 %. It is suggested that there might be an advantage in hydrogasification processes if waste plastics are mixed with coal, such content being practically assumed.