The hardrock minerals industry and the landscape architect

The landscape architecture profession is a source of creative thinking and planning which is relatively untapped within the mining industry in the United States of America. The landscape architect has been active in European operations for years as indicated by the four examples presented. The landscape architect can provide an important interface with mine design and engineering and environmental affairs. To initiate this interface within the United States, and increase its effectiveness, six objectives are presented and discussed.     

Experimental investigation of wood combustion in a fixed bed with hot air

Waste combustion on a grate with energy recovery is an important pillar of municipal solid waste (MSW) management in the Netherlands. In MSW incinerators fresh waste stacked on a grate enters the combustion chamber, heats up by radiation from the flame above the layer and ignition occurs. Typically, the reaction zone starts at the top of the waste layer and propagates downwards, producing heat for drying and devolatilization of the fresh waste below it until the ignition front reaches the grate. The control of this process is mainly based on empiricism.MSW is a highly inhomogeneous fuel with continuous fluctuating moisture content, heating value and chemical composition. The resulting process fluctuations may cause process control difficulties, fouling and corrosion issues, extra maintenance, and unplanned stops. In the new concept the fuel layer is ignited by means of preheated air (T > 220 °C) from below without any external ignition source. As a result a combustion front will be formed close to the grate and will propagate upwards. That is why this approach is denoted by upward combustion.Experimental research has been carried out in a batch reactor with height of 4.55 m, an inner diameter of 200 mm and a fuel layer height up to 1 m. Due to a high quality two-layer insulation adiabatic conditions can be assumed. The primary air can be preheated up to 350 °C, and the secondary air is distributed via nozzles above the waste layer. During the experiments, temperatures along the height of the reactor, gas composition and total weight decrease are continuously monitored. The influence of the primary air speed, fuel moisture and inert content on the combustion characteristics (ignition rate, combustion rate, ignition front speed and temperature of the reaction zone) is evaluated.The upward combustion concept decouples the drying, devolatilization and burnout phase. In this way the moisture and inert content of the waste have almost no influence on the combustion process. In this paper an experimental comparison between conventional and reversed combustion is presented.     

Relationship between deposition and attachment rates in Jacobi room model

It is shown in this work that parameters of the Jacobi model, which describes behavior of short-lived radon progeny, are not independent. The relationship between deposition rate of attached radon progeny and attachment rate of their unattached fraction was determined in this paper. It was found that deposition rate increases when the attachment rate is smaller; this effect is more pronounced for larger friction velocity. The deposition rate of attached radon progeny is presented here as a function of friction velocity, ventilation and attachment rate. Deposition rate of attached fraction was estimated in the range 0.012-0.46 h⁻¹, when attachment rate varies from 10 h⁻¹ to 100 h⁻¹.     

Chorionic villus sampling utilization following reports of a possible association with fetal limb defects

Prenatal diagnosis choices were reviewed in 473 women who presented for genetic counselling prior to 11 weeks' gestation for the indication of advanced maternal age. Group A consisted of 336 patients who were unaware of a possible association between chorionic villus sampling (CVS) and limb defects. Group B consisted of 137 patients who were provided this information. Fifty-one per cent of patients in group A and 45 per cent of patients in group B chose CVS. This difference was not significant by χ² analysis (P = 0·7). Patterns of prenatal diagnosis procedure utilization from 1987 to 1992 revealed a significant reduction in CVS utilization accompanied by a corresponding increase in amniocentesis after the association between CVS and limb defects was publicized. Referrals for CVS counselling also significantly declined. However, acceptance rates did not change for those patients who received genetic counselling. First-trimester genetic counselling, including a discussion regarding a possible association between CVS and limb defects, helps patients make informed decisions concerning prenatal diagnosis options, and, in our population, resulted in no change in CVS acceptance rates.     

Socio-economic impact management: programme design and implementation considerations

While larger mineral resource development projects offer new jobs and provide a stimulus to the economy of the area where they are sited, they may also pose problems in rural areas associated with rapid population growth. The purpose of an impact management programme is to anticipate and alleviate project effects that are generally perceived as undesirable and to enhance effects that are beneficial to site area communities. While the effective management of project effects is the end towards which all impact assessment efforts are directed, an integrated approach to impact management has been notably lacking. This paper suggests a systems framework for meeting this need by: (1) reviewing the need for impact management efforts; (2) discussing the objectives of, and considerations in, designing impact management programmes; (3) presenting a conceptual framework for, and key components of, such a programme; and (4) suggesting an approach for implementing such a system as an integral part of the project development process.     

White-tailed deer movement and distribution about surface coal mines in West Virginia,USA

Deer movements around surface coal mines were investigated in Preston Country, West Virginia, USA. Seventy-two deer crossings were counted on 29 surface mines with only 8% found on highwalls with more than 20% rock or stone. Thus, although slope was important, the percentage of dirt on the highwall determined use as a crossing location for deer. The average distance between all deer crossing was 209.7 m but the distance between the end of the highwall and the nearest highwall crossing was 248.7 m indicating reluctance of deer to cross mines when they could walk around them. Winter snow track counts showed fewer deer within 90 m of the top edge of the highwall. Four land bridges traversed the highwall and were heavily utilized by deer, especially in March, April, May, October and November. The surface mine bench was used as a fawn bedding area, but little feeding occurred on this portion of the mine.     

Wild fire impact on copper, zinc, lead and cadmium distribution in soil and relation with abundance in selected plants of Lamiaceae family from Vidlic Mountain (Serbia)

Fire has been considered as an improving factor in soil quality, but only if it is controlled. Severe wild fire occurred in the summer 2007 on the Vidlic Mountain (Serbia) overspreading a huge area of meadows and forests.Main soil characteristics and content of heavy metals (Cu, Pb, Cd, Zn) in different fractions obtained after sequential extraction of soil from post-fire areas and from fire non disturbed areas were studied. In four plant species of Lamiaceae family (Ajuga genevensis L., Lamium galeobdolon (L.) L., Teucrium chamaedrys L., Acinos alpinus (L.) Moench.), that grow in typical habitats of the mountain, distribution of heavy metals in aerial parts and roots was investigated too.For all samples from post-fire area cation exchange capacity and soil organic matter content are increased while rH is decreased. Fire caused slightly increased bioavailability of the observed metals but more significant rise happened in metal amounts bound to oxides and organics. The plants showed variable behavior. T. chamaedrys collected on the post-fire area contained elevated concentrations of all analyzed metals. A. alpinus showed higher phytoaccumulation for Zn and Cd, while the other two plant species for Pb and Cd in the post-fire areas.