Estimation of Cumulative Frequency Distribution for Carbon Monoxide Concentration from Wind-Speed Data, in Buenos Aires (Argentina)

In this article we apply and test a methodology to estimate cumulative frequency distribution for air pollutant concentration from wind-speed data. We use the inverse relationship after Simpson et al. (Atmospheric Environment, 19, 75–82, 1985) between the opposing percentile values in the statistical distributions for air pollutant concentrations and wind-speed data. This relationship is valid, irrespective of the statistical distributions of both variables, if an inverse relationship between them is also applicable. The available data are five years of 8-h average carbon monoxide concentration and 8-h mean wind-speed, observed in Buenos Aires (Argentina). The performance of the obtained empirical expressions in estimating cumulative frequency distributions for 8-h CO is statistically evaluated. The results show that it is possible to obtain an acceptable cumulative frequency distribution for 8-h CO concentration at the site if the cumulative frequency distribution for wind-speed is known. Q–Q plots show a good agreement between estimated and observed values. From our data, the mean relative error of the estimations was found to be as much as 8.0%.     

Carbon Monoxide Concentration in a Street Canyon of Buenos Aires City (Argentina)

The analysis of three years of 8-h CO concentration values registered in a deep street canyon downtown shows high frequency of values that exceed WHO health protection guidelines. An inverse relationship between opposing percentiles of the distributions of CO concentrations and mean wind speed could be found. Data also showed a variation of mean CO values with prevailing wind direction. The averaged concentration value obtained when the sampler probe is on the leeward side is lower than the obtained when it is on the windward wall. A preliminary explanation of this feature may be related to the advection of polluted air from a high traffic density area nearby.     

Monitoring fish communities in wadeable lowland streams: comparing the efficiency of electrofishing methods at contrasting fish assemblages

Electrofishing is considered a reliable tool to assess the assemblages and biodiversity of fish in wadeable streams. The most widely used electrofishing techniques (point [P], single-pass [S-P], and multiple-pass [M-P]) vary as to the effort needed for sample collection, and this may potentially influence the degree of accuracy. Moreover, little is known about the comparability of the methods and their specific performance in streams with different fish assemblages. The aim of this investigation was to validate (using M-P sampling as reference) the use of P and S-P electrofishing techniques to accurately assess the richness, density and size distribution of fishes in small streams at both regional and global scale independently of fish assemblages and geographical region. We sampled 50-m-long reaches in a total of 33 lowland stream reaches that were located in different climatic and biogeographical regions (Uruguay and Denmark) and hosted different fish assemblages. Subtropical fish communities exhibited higher richness (Uy: 12–32, Dk: 1–9) and densities (Uy: 1.3–5.2, DK: 0.1–4.9 in. m^?2) than temperate streams. We applied both "global models" using the entire database (33 sites) and "local models" including the same number of sites but using the climatic region as a model variable. Regression analyses revealed that the P, S-P and M-P methods all provided an adequate picture of the species composition and size distribution, and transfer equations for comparison between methods are thus not required. Conversely, richness was better predicted by S-P and by P techniques for regional and global models, respectively. Transfer equations obtained for abundance revealed that the P and S-P models can accurately transform catch data into M-P estimations. The transfer equations provided here may have great relevance as they allow relatively reliable comparisons to be made between data obtained by different techniques. We also show that less intensive sampling techniques may be equally useful for monitoring purposes as those requiring more intensive efforts (and costs). We encourage validation of our developed transfer equations on data from other regions of the world.     

Multicriteria Decision Aid in Supporting Decisions Related to Groundwater Protection

In the recent decades, there have been frequent conflicts between groundwater resources and environmentally hazardous activities. An example is the construction of the new highway through the important glaciofluvial esker aquifer Nybroåsen, which passes the protection zone of the water supply for the Kalmar municipality, in the southeastern part of Sweden. The decision to build the new road through this important aquifer has been strongly questioned by the municipality and the public because the value of the water resources in Nybroåsen was not taken into consideration during the first phase of the decision-making process. Multicriteria decision aid (MCDA) is applied as a tool to structure and analyze the four road alternatives proposed in the environmental impact assessment for the above conflict. The alternatives, including the existing road, are in conflict with water resources, agriculture, natural, and cultural values. The impacts on the water resources have been predicted by a two-dimensional physically based time-variant flow and solute groundwater model, which has been calibrated and evaluated. The MCDA illustrates how it can be used to identify (1) actors and their concerns, (2) ranking of alternative road scenarios according to actors preferences, and (3) coalition groups of actors, i.e., groups that have similar views with regard to the road alternatives. The analysis shows that the two best compromise solutions obtained in the MCDA were unacceptable by the strongest coalition group, showing that either the family of criteria was not well chosen or new alternatives should have been developed.     

An Evaluation of Daumod Model in Estimating Urban Background Concentrations

This article presents an evaluation of the performance of the urban atmospheric dispersion model (DAUMOD) in estimating nitrogen oxides (NO_x) background concentrations in Copenhagen. Estimations of hourly average (averaged over a year), mean daily and mean monthly concentrations of NO_x are compared with observed values for two years of data. The model slightly underestimates low hourly average values and overestimates high values. The cumulative frequency distribution of mean daily concentration obtained from model estimations is in good agreement with the obtained from observed data. We performed a statistical analysis to determine the agreement between estimated and observed concentration values. The results show that 95.8% of hourly average estimations, 86.8% of mean daily and 100% of monthly average concentrations are within a factor of two of the observed values. The normalised mean square error of predictions is +0.13 for hourly average estimations, +0.22 for mean daily values and +0.02 for monthly mean concentrations. The fractional bias values are: –0.049 for hourly mean estimations, –0.047 for mean daily values and –0.053 for monthly average estimations. The values of the statistical parameters allow us to consider that though estimations are lightly larger than the observed values, the model performance is acceptable.     

Design of an Air-Quality Surveillance System for Buenos Aires City Integrated by a NO x Monitoring Network and Atmospheric Dispersion Models

This paper presents an air-quality surveillance system designed to detect the occurrence of air pollutant concentrations greater than a reference level in an urban area. The system is integrated by an air-quality monitoring network and atmospheric dispersion models simulations. An objective methodology to design an urban air-quality monitoring network is proposed. This methodology is based on the analysis of air-quality modelling results. The procedure is applied to design an air-quality monitoring network to control NO _x concentration levels in Buenos Aires City. Results indicate that six monitors will detect the occurrence of concentration greater than the air-quality guidelines with an efficiency of about 67%. Once a violation is detected, results of atmospheric dispersion models will help in the determination of affected areas. Four possible examples are included to illustrate the assistance that the results of atmospheric dispersion models can bring to a better estimation of possible affected areas in the city. Combining these results with the last census data, an estimation of the inhabitants possibly exposed is obtained.     

A multi-lysimeter investigation on the mobility and persistence of pesticides in the loam soil of the Fucino Plain (Italy)

In order to evaluate the impact of intensive horticulture on the water resources of the Fucino Plain, one of the most important agricultural settlements of Central Italy, the mobility and persistence in the soil of five commonly used pesticides was investigated by means of multi-lysimeter experiments. The fate of simazine, carbaryl, dicloran, linuron and procymidone was evaluated in the laboratory under experimental conditions simulating as closely as possible both pesticide application and irrigation practices required by the local crops. An efficient extraction procedure followed by chromatographic analysis, allowing the simultaneous determination of the applied chemicals, was used to monitor the pesticide residues in the soil columns as a function of time from application and depth. The experiment, carried out for about 60 days, revealed that soil contamination apparently involves only the surface layer since none of the investigated pesticides was detected at depths greater than 20-30 cm. However, the five pollutants exhibit a quite different behaviour that can be related to their physico-chemical properties.     

Comparison of the toxicogenetic potential of sewage sludges from different treatment processes focusing agricultural use

Environmental Science and Pollution Research - A problem that has been dragging in recent decades is the final disposal of the waste produced in the wastewater treatment process. In addition to its...     

Air Pollution Potential: Regional Study in Argentina

/ Air pollution potential is a measure of the atmospheric conditions that are unable to transport and dilute pollutants into the air, independently of the existence of sources. This potential can be determined from two atmospheric parameters: mixing height and transport wind. In this paper a statistical analysis of the mixing height and transport wind, in order to determine the areas with high or poor atmospheric ventilation in Argentina, is presented. In order to achieve this, meteorological data registered during 1979-1982 at eight meteorological stations were used. Daily values of the maximum mixing height were calculated from observations of daily temperatures at different heights and maximum surface temperature. At the same time as the maximum mixing height, the values of the transport wind were determined from the surface windspeed and the characteristics of the ground in the surroundings of each meteorological station. The mean seasonal values for both parameters were obtained. Isopleths of the mean seasonal of the maximum mixing heights were drawn. The percentage of seasonal frequencies of poor ventilation conditions were calculated and the frequency isopleths were also drawn to determine areas with minor and major relative frequencies. It was found that the northeastern and central-eastern regions of Argentina had a high air pollution potential during the whole year. Unfavorable atmospheric ventilation conditions were also found in the central-western side of the country during the cold seasons (37.5% in autumn and 56.9% in winter). The region with the greatest atmospheric ventilation is located south of 40 degrees S, where the frequency of poor ventilation varies between 8.0% in summer and 10.8% in winter.     

Cellular damages in the Allium cepa test system, caused by BTEX mixture prior and after biodegradation process

Petroleum and derivatives have been considered one of the main environmental contaminants. Among petroleum derivatives, the volatile organic compounds benzene, toluene, ethylbenzene and xylene (BTEX) represent a major concern due to their toxicity and easy accumulation in groundwater. Biodegradation methods seem to be suitable tools for the clean-up of BTEX contaminants from groundwater. Genotoxic and mutagenic potential of BTEX prior and after biodegradation process was evaluated through analyses of chromosomal aberrations and MN test in meristematic and F₁ root cells using the Allium cepa test system. Seeds of A. cepa were germinated into five concentrations of BTEX, non-biodegraded and biodegraded, in ultra-pure water (negative control), in MMS 4 × 10⁻⁴ M (positive control) and in culture medium used in the biodegradation (blank biodegradation control). Results showed a significant frequency of both chromosomal and nuclear aberrations. The micronucleus (MN) frequency in meristematic cells was significant for most of tested samples. However, MN was not present in significant levels in the F₁ cells, suggesting that there was no permanent damage for the meristematic cell. The BTEX effects were significantly reduced in the biodegraded samples when compared to the respective non-biodegraded concentrations. Therefore, in this study, the biodegradation process showed to be a reliable and effective alternative to treat BTEX-contaminated waters. Based on our results and available data, the BTEX toxicity could also be related to a synergistic effect of its compounds.