Regional status assessment of stony corals in the US Virgin Islands

States may protect coral reefs using biological water quality standards outlined by the Clean Water Act. This requires biological assessments with indicators sensitive to human disturbance and regional, probability-based survey designs. Stony coral condition was characterized on a regional scale for the first time in the nearshore waters of the US Virgin Islands (USVI). Coral composition, abundance, size, and health were assessed at 66 stations in the St. Croix region in fall 2007 and at 63 stations in the St. Thomas and St. John region in winter 2009. Indicators were chosen for their sensitivity to human disturbance. Both surveys were probability-based (random) designs with station locations preselected from areas covered by hardbottom and coral reef substrate. Taxa richness was as high as 21 species but more than half the area of both regions exhibited taxa richness of <10 species in the 25 m² transect area. Coral density was as high as 5 colonies m^?2 but more than half the area of both regions had <2 colonies m^?2. Both regions showed similar dominant species based on frequency of occurrence and relative abundance. Because of large colony sizes, Montastrea annularis provided more total surface area and live surface area than more abundant species. The surveys establish baseline regional conditions and provide a foundation for long-term regional monitoring envisioned by the USVI Department of Planning and Natural Resources. The probabilistic sampling design assures the data can be used in Clean Water Act reporting.     

Theoretical and Observational Assessments of Flare Efficiencies

ABSTRACT

Flaring of waste gases is a common practice in the processing of hydrocarbon (HC) materials. It is assumed that flaring achieves complete combustion with relatively innocuous byproducts such as CO₂ and H₂O. However, flaring is rarely successful in the attainment of complete combustion, because entrainment of air into the region of combusting gases restricts flame sizes to less than optimum values. The resulting flames are too small to dissipate the amount of heat associated with 100% combustion efficiency.

Equations were employed to estimate flame lengths, areas, and volumes as functions of flare stack exit velocity, stoichiometric mixing ratio, and wind speed. Heats released as part of the combustion process were then estimated from a knowledge of the flame dimensions together with an assumed flame temperature of 1200 K. Combustion efficiencies were subsequently obtained by taking the ratio of estimated actual heat release values to those associated with 100% complete combustion.

Results of the calculations showed that combustion efficiencies decreased rapidly as wind speed increased from 1 to 6 m/sec. As wind speeds increased beyond 6 m/sec,combustion efficiencies tended to level off at values between 10 and 15%. Propane and ethane tend to burn more efficiently than do methane or hydrogen sulfide because of their lower stoichiometric mixing ratios.

Results of theoretical predictions were compared to nine values of local combustion efficiencies obtained as part of an observational study into flaring activity conducted by the Alberta Research Council (ARC). All values were obtained during wind speed conditions of less than 4 m/sec. There was generally good agreement between predicted and observed values. The mean and standard deviation of observed combustion efficiencies were 68 ± 7%. Comparable predicted values were 69 ± 7%.     

Characterization of Emissions from Diffusion Flare Systems

ABSTRACT

Emissions from flares typical of those found at oil-field battery sites in Alberta, Canada, were investigated to determine the degree to which the flared gases were burned and to characterize the products of combustion in the emissions. The study consisted of laboratory, pilot-scale, and field-scale investigations. Combustion of all hydrocarbon fuels in both laboratory and pilot-scale tests produced a complex variety of hydrocarbon products within the flame, primarily by pyrolytic reactions. Acetylene, eth-ylene, benzene, styrene, ethynyl benzene, and naphthalene were some of the major constituents produced by conversion of more than 10% of the methane within the flames. The majority of the hydrocarbons produced within the flames of pure gas fuels were effectively destroyed in the outer combustion zone, resulting in combustion efficiencies greater than 98% as measured in the emissions.

The addition of liquid hydrocarbon fuels or condensates to pure gas streams had the largest effect on impairing the ability of the resulting flame to destroy the pyrolytically produced hydrocarbons, as well as the original hydrocarbon fuels directed to the flare. Crosswinds were also found to reduce the combustion efficiency (CE) of the co-flowing gas/condensate flames by causing more unburned fuel and the pyrolytically produced hydrocarbons to escape into the emissions.

Flaring of solution gas at oil-field battery sites was found to burn with an efficiency of 62-82%, depending on either how much fuel was directed to flare or how much liquid hydrocarbon was in the knockout drum. Benzene, styrene, ethynyl benzene, ethynyl-methyl benzenes, toluene, xylenes, acenaphthalene, biphenyl, and fluorene were, in most cases, the most abundant compounds found in any of the emissions examined in the field flare testing. The emissions from sour solution gas flaring also contained reduced sulfur compounds and thiophenes.     

Dynamics of the spatial distribution pattern of larid birds during an 11-year climate cycle (the Selenga River Delta,Southern Lake Baikal)

The results of long-term studies (1973–1982) have been used to analyze specific features in the distribution of larid bird colonies in the Selenga River delta over an 11-year climate cycle. It has been shown that the spatial distribution of these birds has distinct patterns in years with different water levels (high, medium, or low) in the delta and is based on preference for certain nesting biotopes, which is well manifested in all species studied and depends on their ecological niches. The main factors determining the distribution of birds over the study area include water level, terrain topography, and locations of major aggregations of food organisms.     

High heterogeneity in soil composition and quality in different mangrove forests of Venezuela

Mangrove forests play an important role in biogeochemical cycles of metals, nutrients, and C in coastal ecosystems. However, these functions could be strongly affected by the mangrove soil degradation. In this study, we performed an intensive sampling characterizing mangrove soils under different types of environment (lagoon/gulf) and vegetation (Rhizophora/Avicennia/dead mangrove) in the Venezuelan coast. To better understand the spatial heterogeneity of the composition and characteristics of the soils, a wide range of the soil attributes were analyzed. In general, the soils were anoxic (Eh < 200 mV), with a neutral pH and low concentration in toxic metals; nevertheless, they varied widely in the soil and its quality-defining parameters (e.g., clay contents, total organic carbon, Fe, Al, toxic trace metals). It is noteworthy that the mangroves presented a low Fe_Pyrite content due to a limitation in the Fe oxyhydroxide contents, especially in soils with higher organic C content (TOC > 15%). Finally, the dead mangrove showed significantly lower amounts of TOC and fibers (in comparison to the well-preserved mangrove forest), which indicates that the C pools in mangrove soils are highly sensitive also to natural impact, such as ENSO.     

Western Land Managers will Need all Available Tools for Adapting to Climate Change,Including Grazing: A Critique of Beschta et al.

In a previous article, Beschta et al. (Environ Manag 51(2):474–491, 2013) argue that grazing by large ungulates (both native and domestic) should be eliminated or greatly reduced on western public lands to reduce potential climate change impacts. The authors did not present a balanced synthesis of the scientific literature, and their publication is more of an opinion article. Their conclusions do not reflect the complexities associated with herbivore grazing. Because grazing is a complex ecological process, synthesis of the scientific literature can be a challenge. Legacy effects of uncontrolled grazing during the homestead era further complicate analysis of current grazing impacts. Interactions of climate change and grazing will depend on the specific situation. For example, increasing atmospheric CO₂ and temperatures may increase accumulation of fine fuels (primarily grasses) and thus increase wildfire risk. Prescribed grazing by livestock is one of the few management tools available for reducing fine fuel accumulation. While there are certainly points on the landscape where herbivore impacts can be identified, there are also vast grazed areas where impacts are minimal. Broad scale reduction of domestic and wild herbivores to help native plant communities cope with climate change will be unnecessary because over the past 20–50 years land managers have actively sought to bring populations of native and domestic herbivores in balance with the potential of vegetation and soils. To cope with a changing climate, land managers will need access to all available vegetation management tools, including grazing.     

Product life cycle: The key to integrating ehs into corporate decision making and operations

A consensus is emerging that traditional environmental health and safety (EHS) programs—characterized by EHS professionals serving a support function to a company's main operations—represent only part of effective EHS management. In order to be truly successful, EHS management must go beyond this format and integrate EHS considerations into the corporation itself, from its strategic corporate decision making to its everyday operations on the manufacturing floor. Only when EHS becomes part of the fabric of a business's activity will EHS risks and costs be truly minimized—and the many potential benefits fully realized. This article discusses how to make this goal a reality by use of the manufacturing and product life cycle (PLC) perspective. It will first stress the importance of integrating EHS considerations into corporate decision making and operations. It will then trace the critical steps for achieving such integration through the use of the PLC, concentrating particularly on a General Electric Company (GE) chemical management process that weaves EHS concerns into every stage of day-to-day operations.     

The New Standard Environmental Inventory Questionnaire for Estimation of Indoor Concentrations

Several investigators have developed indoor air quality questionnaires for use in field studies. The approach used in many of them have numerous features in common, but most of them are unique in their content (wording, format, item selection). It is thought that indoor air quality research could be greatly advanced if the primary or fundamental questions and instruments could be consolidated. The use of a basic set of "standard" questions would permit intercomparison of results from different research studies. It is generally agreed that environmental inventory questionnaires (EIQ) help to classify, at least in screening, relative concentration estimates, which precede exposure estimation. Thus, such instruments are not equivalent to monitoring for exposure assessment. However, data linkage and mega data bases are important for some comparative analyses of exposure assessment and exposure-response relationships. Standard instruments such as the EIQ are useful as a screening device to precede other tests to allow identification of potentially high exposure situations. They can also amplify information from other tests. General usage of standard questionnaires and protocols can lead to cumulative improvements in data collection, specificity and effectiveness. This has been the rationale for the present efforts by investigators to form a standardized environmental inventory questionnaire, under the auspices of the U.S. Environmental Protection Agency (EPA), Gas Research Institute (GRI), and Electric Power Research Institute (EPRI).