Predicting Satisfaction with Smart Irrigation Controllers and Their Long‐Term Use among Homeowners in Central Florida

Studies throughout Florida have shown smart controllers can substantially reduce irrigation under residential high‐water use conditions. However, successful promotion requires understanding the link between controller performance and the mechanisms by which they are adopted. This article compares irrigation water‐use and survey data collected from households installed with soil moisture sensor and evapotranspiration controllers. The study investigated whether the relative change in irrigation use between two years preceding and two years following installation was a reliable predictor of a homeowner's satisfaction with the device and likelihood of continuing to use it. Results indicated relative changes in irrigation use were only significantly associated with the quality of controller programming. Satisfaction with the controller was largely attributable to satisfaction with the appearance of the landscape and the perceived water‐saving effectiveness of the controller whereas the likelihood of its continued use was only significantly predicted by the level of technical knowledge regarding its functioning and whether or not challenges were experienced with it. Targeting homeowners with supplemental user‐friendly information may best support their long‐term adoption of smart controllers while providing irrigation contractors with training in implementation techniques would represent an integrated strategy for added reductions in residential outdoor water use.     

Minimization of the environmental impact in the unhairing of bovine hides

This study tests an alternative method to the traditional unhairing method used during the process of tanning the hides. The new method is based on the substitution of sodium sulfide by hydrogen peroxide as an unhairing agent in both hair recovery and recirculation of the floats employed in the process. The properties of the hides obtained using the two methods have been compared and the results indicate that those hides have similar physical, chemical, and organoleptic properties. However, the differences existing from an environmental point of view are significant. These include reductions of water consumption (approx 70%), chemical oxygen demand (approx 35%), toxicity (98%) and total kjendhal nitrogen (50%). Also, the risk associated with the production of hydrogen sulfide is eliminated, which implies a great improvement in terms of safety for the workers. Given the large amounts of water and chemical pollution discharged in the process, the reductions in absolute values represent a significant improvement. A financial assessment was carried out to demonstrate that the proposed new system is 16% more economic than the traditional one.     

High chrome exhaustion in a non-float tanning process using a sulphonic aromatic acid

Tanning processes performed in drums consume large amounts of water and chemicals, most of which end up in the wastewater. This study explores an alternative approach at an industrial scale to the traditional pickle-chrome tanning method. The new method replaces formic and sulphuric acids with sulphonic aromatic acid. Because it is done without float, there is a sizeable reduction in the amount of added salt and chrome salt as well as an increase in temperatures at the end of the tanning process. From an environmental perspective, the new method offers important advantages. For instance, there is no float addition in the tannage. Also, there are reductions of 94% and 99%, respectively, in the discharge of chlorides and chrome, as well as a 75% reduction in the residual float. Our financial assessment demonstrated that the new method is 42% cheaper than a traditional approach.     

Minimization of the environmental impact of chrome tanning: a new process with high chrome exhaustion

In all tanning technology operations wastes are generated. These reach the environment as residual waters, solid and liquid waste as well as atmospheric emissions and odours.

This study tests an alternative method to the traditional tanning method at an industrial level. The new method is based on tanning without float and by significantly increasing the temperature at the end of the tanning process. The properties of the leathers obtained using the two methods have been compared and the results indicate that those leathers have similar physical, chemical, and organoleptic properties. However, the differences existing from the environmental point of view are significant. It is not necessary to use clean water for this tanning. Moreover, there is a 75% reduction of the residual float, a 91% reduction of the chrome discharged, and a 94% reduction of the chlorides discharged. A financial assessment was carried out to demonstrate that the newly proposed system is 32% more economic than the traditional one.     

Minimization of the environmental impact of chrome tanning: a new process reusing the tanning floats

A chrome tanning process which allows the reuse of tanning floats has been developed. The most commonly used chromium salts were replaced by highly masked and basified ones. This substitution eliminates basification operation and prevents pH change and the considerable neutral salts concentration increase in the tanning float. Consequently, tanning float can be reused several times. An optimum chromium salt concentration in the tanning float between 10% and 12.5% has been determined. It has been shown that the number of times the tanning float can be reused depends on the quality of the leather grain to be manufactured. In the best case, a saving of 18 L of water per kilogram of tanned leather is calculated. This means savings of 90% of water normally used.     

Isotherms and sequential extraction procedures for evaluating sorption and distribution of heavy metals in soils

Heavy metals are potentially toxic to human life and the environment. Their contaminating effect in soils depends on chemical associations. Hence, determining the chemical form of a metal in soils is important to evaluate its mobility and bioavailability. We utilized a sequential extraction procedure and sorption isotherms (monometal and competitive) to evaluate the mobility and distribution of Cd, Cu, Ni, Pb, and Zn in four soils differing in their physicochemical properties: Calcixerollic Xerochrepts (Cx1 and Cx2), Paralithic Xerorthent (Px) and Lithic Haplumbrept (Lh). Most of the metals retained under point B conditions of sorption isotherms were extracted from the more mobile fractions: exchangeable and carbonates, in contrast with the profiles of the original soils where metals were preferently associated with the residual fraction. In soils having carbonate concentration under 6% (Cx1 and Lh), the exchangeable fraction was predominant, whereas in calcareous soils (Cx2 and Px) metals extracted from carbonates predominated. Partitioning profiles were in accordance with the affinity sequences deduced from the initial slope of isotherms and showed that the soils had a greater number of surface sites and higher affinity for Pb and Cu than for Cd, Ni, or Zn. In general, the simultaneous presence of the cations under study increased the percentages of metals released in the exchangeable fraction. The tendency towards less specific forms was more noticeable in Cx2 and Px soils and for Ni, Zn, and Cd. The affinity of inorganic surfaces was larger for Zn than for Cd or Ni, but the affinity of organic surfaces was larger for Cd or Ni than for Zn.     

Competitive sorption of heavy metal by soils. Isotherms and fractional factorial experiments

Competing ions strongly affect heavy metal sorption onto the solid surfaces of soil. This study evaluated competitive sorption of Cd, Cu, Ni, Pb and Zn on three soils: Calcixerollic Xerochrept, Paralithic Xerorthent and Lithic Haplumbrept. Monometal and competitive sorption isotherms were obtained at 25 degrees C. The individual effect of ions on retention of the others was ascertained by a fractional factorial analysis design. Most of the sorption isotherms belonged to type L subtype 2 in the classification of Giles. In competitive sorption the initial linear part was shorter and the knee sharper when compared with monometal sorption isotherms. Parameters related to sorptive capacity, such as Point B, Langmuir monolayer and Freundlich distribution coefficient, were higher in monometal than in competitive sorption, and in basic soils than in acidic soil. Calcium desorbed at different points of the sorption isotherms indicated that cationic exchange with Ca was the main retention mechanism in calcareous soils. For Pb, the ratio Ca desorbed/Pb sorbed was close to one; for Cu, Ni and Zn the ratio ranged from 1.20 to 1.37, probably due to partial dissolution of calcium carbonates by hydrolytic processes during retention. On the other hand, Cd had a ratio around 0.6 reflecting another additional retention mechanism, probably surface complexation. Fractional factorial design confirmed that the presence of the cations investigated reduced the amount of the five metals retained, but the presence of Cu and Pb in the system depressed Ni, Cd and Zn sorption more than the inverse. Cation mobility was enhanced when equilibrium concentration increased and the effect was higher in Ca-saturated soils.     

Determinants of Landscape Irrigation Water Use in Florida-Friendly Yards

Environmental Management - Efforts to mitigate outdoor water use in Florida’s urban landscapes increasingly include promotion of regionally appropriate landscaping based on its documented...     

The SEAP in the city of Girona,a crossroads between boldness and pragmatism

The Covenant of Mayors has secured the commitments of over 5400 European Cities (as of December 2013) to achieving the European Union 20-20-20 climate change mitigation targets by 2020 through action at the local level. Due to the youth of the initiative, few experiences have been reported in the academic literature. We study the development of the Sustainable Energy Action Plan (SEAP) in the city of Girona (Catalonia, Spain) to analyse the opportunities and challenges this process may present in a small- to medium-sized, compact Mediterranean city. This knowledge can provide information to local authorities in similar municipalities, technical teams and decision-makers at the European level interested in enhancing the performance of such plans in the future. In this article, we explain how the SEAP was developed in Girona, the main results and proposed actions, and discuss the main setbacks. We conclude that an overarching European oversight organism is advisable to coordinate and aid local efforts.