Building a place-responsive society through inclusive local projects and networks

This paper presents the story of a project undertaken by researchers who are active participants in the national Australian debate over place and belonging. It arose from the desire to ground this debate, which brings issues of ecological sustainability, reconciliation and multiculturalism together, in more localised action aimed at building a 'place-responsive society'. The project was carried out as a case study in a region that combines part of the Sydney metropolitan area and the separate 'city' of the Blue Mountains, and involved a consultative committee and then a regional forum of conservationists, environmental educators and community workers. The researchers explored existing place-oriented initiatives in the region and developed practical projects for the future, most notably a proposal for 'totemic species' work within schools involving local Aboriginal people. The research demonstrated, more than anything else, that indigenous Australian approaches to 'place awareness' and nature conservation remain highly relevant in contemporary Australia. It also showed that bioregional awareness and the notion of place responsiveness can add value to more traditional approaches to nature conservation and environmental education. There are opportunities to galvanise local action that can integrate community and environmental work and revitalise professional practice in both areas, but the effort involves working constantly with difference and conflict.     

Conversion of CCA-treated wood to ethanol: a method to reduce leaching of metals from disposed treated wood prior to disposal

The objective of this paper is to evaluate the feasibility of producing ethanol from CCA-treated wood that is highly leachable. Following the initial tests, CCA-treated wood was hydrolysed and fermented and the results showed not only that ethanol was produced during the fermentation process but that metals were taken up by the yeast. Toxicity characteristic leaching procedure tests of the hydrolysed wood leached less than 4 mg/L of As while minimal amounts of Cr and Cu remained in the hydrolysed wood which makes landfilling of hydrolysed wood acceptable and less hazardous. A slightly lower amount of ethanol from CCA-treated than untreated wood was produced (6 and 7 g/L, respectively). In general, it suggests that production of ethanol as a source of energy from a hazardous waste (CCA-treated wood) is feasible.     

Towards a sustainability criteria and indicators framework for legacy mine land

Sustainable development practices have become an integral part of most major mining companies’ business activities. However, the history of mining and the negative impacts it has had on the natural and social environment mean future mining activities, rightly or wrongly, will be judged against the legacies of the past and current poor performers. Legacy mine land, defined here as land which has been mined and is now being used for another purpose, or is orphaned, abandoned or derelict and in need of remedial work, is one management challenge that will be judged in the context of sustainable development. Globally, millions of such sites exist. Having criteria against which to measure progress toward or away from sustainable development goals is a key to delivering results. The aim of this research was to develop a sustainability criteria and indicators framework to suit the particular needs of legacy mine land. The resulting framework consists of 14 criteria and 72 indicators.     

Validation of Models for Predicting Formaldehyde Concentrations in Residences due to Pressed-Wood Products

This paper describes a laboratory project to assess the accuracy of emission and indoor air quality models to be used in predicting formaldehyde (HCHO) concentrations in residences due to pressed-wood products made with urea-formaldehyde bonding resins. The products tested were partlcleboard underlayment, hardwood- plywood paneling and medium-density fiberboard (mdf). The products were initially characterized in chambers by measuring their formaldehyde surface emission rates over a range of formaldehyde concentrations, air exchange rates and two combinations of temperature and relative humidity (23° C and 5 0% RH; 26°C and 60% RH). They were then installed in a two-room prototype house in three different combinations (underlayment flooring only; underlayment flooring and paneling; and underlayment flooring, paneling, and mdf). The equilibrium formaldehyde concentrations were monitored as a function of air exchange rate. Particleboard underlayment and mdf, but not paneling, behaved as the emission model predicted over a large concentration range, under both sets of temperature and relative humidity. Good agreement was also obtained between measured formaldehyde concentrations and those predicted by a mass-balance indoor air quality model.     

Effect of natural organic matter on arsenic release from soils and sediments into groundwater

Arsenic (As) contamination in groundwater has received significant attention recently. Natural and anthropogenic sources contribute to the worldwide occurrence of As contamination. As speciation is an important factor related to its toxic and mobile behavior. The release of As from soils and sediments into groundwater is governed by several geophysicochemical processes, of which, As sorption behavior is of principle significance. This review paper summarizes existing information regarding the effects of natural organic matter (NOM) on the fate and mobility of As species in the environment. NOM may enhance the release of As from soils and sediments into the soil solution, thereby facilitating As leaching into the groundwater. The main influencing mechanisms include competition for available adsorption sites, formation of aqueous complexes, and/or changes in the redox potential of site surfaces and As redox speciation. NOM may also serve as binding agents, thereby reducing As mobility. However, comparably little research has been performed on this aspect. Since most investigations have been done on purified minerals under laboratory conditions, further research involving various geological materials under natural environmental conditions is required. Development of proper geochemical conceptual models may provide means of predicting the role of NOM in arsenic leaching and/or immobilization.     

Utilization of a biosurfactant foam/nanoparticle mixture for treatment of oil pollutants in soil

Oil contamination has become a primary environmental concern due to increased exploration, production, and use. When oil enters the soil, it may attach or adsorb to soil particles and stay in the soil for an extended period, contaminating the soil and surrounding areas. Nanoparticles have been widely used for the treatment of organic pollutants in the soil. Surfactant foam has effectively been employed to remediate various soil contaminants or recover oil compounds. In this research, a mixture of biosurfactant foam/nanoparticle was utilized for remediation of oil-contaminated soil. The results demonstrated that the biosurfactant/nanoparticle mixture and nitrogen gas formed high-quality and stable foams. The foam stability depended on the foam quality, biosurfactant concentration, and nanoparticle dosage. The pressure gradient change in the soil column relied on the flowrate (N₂ gas + surfactant/nanoparticle mixture), foam quality, and biosurfactant concentration. The optimal conditions to obtain good quality and stable foams and high oil removal efficiency involved 1 vol% rhamnolipid, 1 wt% nanoparticle, and 1 mL/min flowrate. Biosurfactant foam/nanoparticle mixture was effectively used to remediate oil-contaminated soil, whereas the highest treatment efficiency was 67%, 59%, and 52% for rhamnolipid biosurfactant foam/nanoparticle, rhamnolipid biosurfactant/nanoparticle, and only rhamnolipid biosurfactant, respectively. The oil removal productivity decreased with the increase of flowrate due to the shorter contact time between the foam mixture and oil droplets. The breakthrough curves of oil pollutants in the soil column also suggested that the foam mixture’s maximum oil treatment efficiency was higher than biosurfactant/nanoparticle suspension and only biosurfactant.

     

Environmental applications for biosurfactants

Biosurfactants are surfactants that are produced extracellularly or as part of the cell membrane by bacteria, yeasts and fungi. Examples include Pseudomonas aeruginosa which produces rhamnolipids, Candida (formerly Torulopsis) bombicola, one of the few yeasts to produce biosurfactants, which produces high yields of sophorolipids from vegetable oils and sugars and Bacillus subtilis which produces a lipopeptide called surfactin. This review includes environmental applications of these biosurfactants for soil and water treatment. Biosurfactant applications in the environmental industries are promising due to their biodegradability, low toxicity and effectiveness in enhancing biodegradation and solubilization of low solubility compounds. However, more information is needed to be able to predict and model their behaviour. Full scale tests will be required. The role of biosurfactants in natural attenuation processes has not been determined. Very little information is available concerning the influence of soil components on the remediation process with biosurfactants. As most of the research until now has been performed with rhamnolipids, other biosurfactants need to be investigated as they may have more promising properties.     

Investigation of the removal of heavy metals from sediments using rhamnolipid in a continuous flow configuration

Heavy metal contamination of sediments is hazardous to benthic organisms and needs more attention in order to prevent entry of these heavy metals into the food chain. Biosurfactants have shown the capability to remove heavy metals from soils and sediments. The objective of this research was to evaluate the performance of rhamnolipid, a glycolipid biosurfactant, in a continuous flow configuration (CFC) for removal of heavy metals (copper, zinc, and nickel) from the sediments taken from Lachine Canal, Canada, to simulate a flow through remediation technique. In this configuration, rhamnolipid solution with a constant rate was passed through the sediment sample within a column. Important parameters such as the concentration of rhamnolipid and the additives, time and the flow rate were investigated. The removal of heavy metals from sediments was up to 37% of Cu, 13% of Zn, and 27% of Ni when rhamnolipid without additives was applied. Adding 1% NaOH to 0.5% rhamnolipid improved the removal of copper by up to 4 times compared with 0.5% rhamnolipid alone. This information is valuable for designing a remediation protocol for sediment washing.     

Pilot-scale application of a single-stage hybrid airlift BioCAST bioreactor for treatment of ammonium from nitrite-limited wastewater by a partial nitrification/anammox process

Environmental Science and Pollution Research - This paper presents the treatment of a nitrite-limited wastewater by partial nitrification/anammox process under different dissolved oxygen (DO)...     

Anaerobic bioconversion of carbon dioxide to biogas in an upflow anaerobic sludge blanket reactor

The increasing concentration of carbon dioxide (CO2)--the most dominant component of greenhouse gases--in the atmosphere has been of growing concern for many years. Many methods focus on CO2 capture and storage and there is always the risk of CO2 release to the environment. In this study, a new method to convert CO2 to biogas with a high content of methane (CH4) in an anaerobic system with a lab-scale upflow anaerobic sludge blanket reactor at 35 degrees C was developed. In a series of experiments, the reactor was run with and without CO2-saturated solutions including volatile fatty acids (VFAs) as sources of hydrogen. The concentration of dissolved CO2 in the influent solutions was 2.2-6.1 g/L, with corresponding chemical oxygen demand (COD) values of 2.6-8.4 g/L for the solutions. Overall CO2 removal values of 2.7-20 g/day (49-88% conversion) were obtained for the organic loading rates (OLR) and CO2 loading rates of 8-36 gCOD/L day and 6-26 gCO2/L x day, respectively with CH4 purity of above 70%. Also, VFA and COD removal were in the range of 79-95% and 75-90%, respectively. Methanogenic activities of the cultures with the concentrations measured as volatile suspended solids (VSSs) were 0.12-0.40 L CH4/gVSS x d with the highest value for the system containing acetic acid. This anaerobic method can be applied to reduce CO2 emitted to the atmosphere from a wide variety of industrial point sources with a value-added product, CH4.