Pesticide residue removal in classic domestic processing of tomato and its effects on product quality

This study was undertaken to evaluate the effectiveness of several household practices (washing with water or acidic, alkaline, and oxidizing solutions, and peeling) in minimizing pesticide residue contamination of tomatoes, as well as the impact on the quality of the treated fruit. Tests were performed using two systemic fungicides (azoxystrobin and difenoconazole) and one contact fungicide (chlorothalonil). Solid-liquid extraction with low temperature partition (SLE/LTP) and liquid-liquid extraction with low temperature partition (LLE/LTP) were used to prepare the samples for pesticides determination by gas chromatography. Washing the tomatoes with water removed approximately 44% of chlorothalonil, 26% of difenoconazole, and 17% of azoxystrobin. Sodium bicarbonate (5%) and acetic acid (5%) solutions were more efficient, removing between 32 and 83% of the residues, while peeling removed from 68 to 88% of the pesticides. The washing solutions altered some fruit quality parameters, including acidity and chroma, and also caused weight loss. Acetic acid (0.15 and 5%) and hypochlorite (1%) solutions had the greatest effect on these parameters.     

Determination of selenium by GFAAS in slurries of fish feces to estimate the bioavailability of this micronutrient in feed used in pisciculture

This paper presents a simple, fast and sensitive method to determine selenium in samples of feces and of fish feed by graphite furnace atomic absorption spectrometry (GFAAS) through the direct introduction of slurries of the samples into the spectrometer's graphite tube. The limits of detection (LOD) and quantification (LOQ) calculated for 20 readings of the blank of the standard slurries (0.50% m/v of feces or feed devoid of selenium) were 0.31 microg l(-1) and 1.03 microg l(-1), respectively, for the standard feces slurries and 0.35 microg l(-1) and 1.16 microg l(-1), respectively, for the standard feed slurries. The proposed method was applied in studies of bioavailability of selenium in different fish feeds and the results proved consistent with that obtained from samples mineralized by acid digestion using the microwave oven.     

Colonization and early succession on artificial hard substrata by meiofauna

An experiment was undertaken at Farol Island, Brazil, to examine colonization of bare aluminium surfaces by microbes and meiofauna. It was hypothesized that a primary source of meiofaunal colonists was sediment resuspended during upwelling events, two of which occurred during the experiment. Microbial biofilms formed on the experimental substrata within 1 day, and continued to develop throughout the experimental period. Among meiofaunal groups copepods also appeared on the first day, and nematodes on the second. Meiofaunal community structure developed in three main phases: an initial phase of 2 days, characterized by low abundances of copepods; a second phase during the first upwelling period characterized by higher abundances of copepods and also by turbellarians; and a third phase from day 13 onwards characterized by relatively stable abundances of a range of taxa including copepods, cirripedes, nematodes and ostracods. Nematode assemblages also developed in three phases, but with different timings coinciding with upwelling events: an initial phase, from the beginning of the experiment to day 9, characterized by few species and low (or no) abundances; a second phase following the first upwelling characterized by moderate abundances of Chromadorina, Chromadorella, Daptonema and Euchromadora sp. 3; a third phase following the second upwelling period (from day 26 onwards) in which Daptonema disappeared and the assemblage was characterized by moderate to high abundances of Euchromadora (species 1 and 2) and Chromadorella. Although shifts in nematode assemblage structure coincided with upwelling events no evidence was found for sediments being the primary source of colonizers on the aluminium substrata, in contrast to our hypothesis.     

Evaluation of metabisulfite and a commercial steel wool for removing chromium(VI) from wastewater

Efficiency of metabisulfite and a commercial steel wool as reducing agents in the removal of Cr(VI) from wastewaters was evaluated. Chromium(VI) was converted to Cr(III), precipitated with NaOH, and removed by filtration. A reduction of more than 1.0 × 10⁵ and 4.0 × 10⁵ fold in total Cr and the Cr(VI) concentrations, respectively, was observed by employing steel wool masses as low as 0.4420 g to 30-mL solutions of wastewater. Chromium(III) hydroxide obtained after the treatment was recycled and used as marker in cattle nutrition studies. The liquid residue obtained after the treatment was reused as precipitation agent replacing NaOH.     

Enhancing submerged coastal constructions by incorporating multifunctional purposes

Surfing has becoming more and more attractive in the past few decades, constituting nowadays an important source of revenue for many countries with extensive coastlines. For this purpose and also for environmental reasons, the conventional ways of protecting a coastline appear to entail some disadvantages. An innovative and interesting way of improving surfing capacities and contributing to protect a local coastal zone is by means of multifunctional artificial reefs. A multifunctional artificial reef (MFAR) is a submerged structure that serves several purposes; in particular, it may enhance the surfing possibilities and the environmental value of the local area. This structure has some promising new aspects, too: first, it provides an unimpaired visual amenity; second, it offers tourist and economic benefits by improving the surfing conditions; third, it can enhance the environmental value of the area where it is built, and fourth, if designed properly, the down drift erosion can be minimal. An appropriate reef design in terms of ‘surfability’, i.e. the possibility to surf a wave, for the Leirosa beach, located to the south of Figueira da Foz, midway along Portugal’s West Atlantic coast, has been investigated. In order to achieve the best design several steps were conducted. First, the performance of the Boussinesq-type COULWAVE model is tested with experimental data. Next, this numerical model is used to define the best values for three design parameters: reef angle; geometry of the reef (without or with a platform), and horizontal dimensions for the appropriate geometry. A preliminary design was achieved step by step, making use of the theory and of the state of the art of multifunctional reefs. This reef geometry is used in the numerical study. In terms of ‘surfability’ and for the conditions of the local coastline of Leirosa, the following values were found for the main parameters: a reef angle of 66°; a structure height of 3.20 m; a reef geometry composed of a delta without a platform; a reef submergence of 1.50 m, and a structure seaward slope of 1:10.     

Erosion risk levels at the NW Portuguese coast: the Douro mouth—Cape Mondego stretch

The entire northwestern coast of Portugal is undergoing severe erosion and there are several areas at high risk of erosion. Commonly considered as a problem—because it jeopardizes human development along the coast—erosion is indeed a natural process of sediment redistribution. This paper presents a brief analysis of erosion driving forces and the subsequent state of vulnerability that coastal segments between the mouth of the River Douro and Cape Mondego are facing. The paper also discusses erosion risk levels, low or high, and the subsequent questions whether there are populations, economical assets or natural habitats at risk and/or areas prone to coastal flooding. Main challenges and future trends along the study area are identified in the light of understanding the underlying causes of conflicts and what realistically can be achieved given the morphodynamics and hydrodynamic processes, human development established along this coastal segment and the existing policies.     

Pseudomonas fluorescens dynamics in the soil surface to subsurface transect

Microbial displacement in the soil is an important process for bioremediation and dispersal of wastewater pathogens. We evaluated cell movement in surface and subsurface red-yellow podzolic soil driven by advection and microbial motility and also survival of a microbial population at high pressure as is prevalent in deep soil layers. Pseudomonas fluorescens Br 12, resistant to rifampycin and kanamycin, was used as a model organism traceable in non-sterile soil. Our results showed that more than 40% of the P. fluorescens population survived under high pressure, and that microbial motility was not a major factor for its displacement in the soil. Cells were adsorbed in similar amounts to surface and subsurface soils, but more viable cells were present in the leachate of surface than in subsurface soils. The nature of this unexpected cell binding to the subsurface soil was studied by EPR, Mossbauer, NMR, and infrared techniques, suggesting iron had a weak interaction with microbes in soil. P. fluorescens movement in soil resulted mainly from convection forces rather than microbial motility. The transport of this bacterium along the transept toward groundwater encountered restricted viability, although it survived under high pressure conditions simulating those in deep soil layers.