Long-term dispersion and availability of metals from submarine mine tailing disposal in a fjord in Arctic Norway

Mining of Cu took place in Kvalsund in the Arctic part of Norway in the 1970s, and mine tailings were discharged to the inner part of the fjord, Repparfjorden. Metal speciation analysis was used to assess the historical dispersion of metals as well as their potential bioavailability from the area of the mine tailing disposal. It was revealed that the dispersion of Ba, Cr, Ni, Pb and Zn from the mine tailings has been limited. Dispersion of Cu to the outer fjord has, however, occurred; the amounts released and dispersed from the mine tailing disposal area quantified to be 2.5–10 t, less than 5% of Cu in the original mine tailings. An estimated 80–390 t of Cu still remains in the disposal area from the surface to a depth of 16 cm. Metal partitioning showed that 56–95% of the Cu is bound in the potential bioavailable fractions (exchangeable, reducible and oxidisable) of the sediments, totalling approximately 70–340 t, with potential for continuous release to the pore water and re-precipitation in over- and underlying sediments. Surface sediments in the deposit area were affected by elevated Cu concentrations just above the probable effect level according to the Norwegian sediment quality criteria, with 50–80% Cu bound in the exchangeable, reducible and oxidisable fractions, potentially available for release to the water column and/or for uptake in benthic organisms.     

Elemental analysis of ash residue from combustion of CCA treated wood waste before and after electrodialytic extraction

Element distribution in a combined fly ash and bottom ash from combustion of copper chromate arsenate (CCA) treated wood waste was investigated by scanning electron microscopy (SEM/EDX) before and after electrodialytic extraction. The untreated ash contained various particles, including pieces of incompletely combusted wood rich in Cr and Ca, and irregular particles rich in Si, Al and K. Cr was also found incorporated in silica-based matrix particles. As was associated with Ca in porous (char) particles, indicating that Ca-arsenates had been formed during combustion. Cu was associated with Cr in the incompletely combusted wood pieces and was also found in almost pure form in a surface layer of some matrix particles - indicating surface condensation of volatile Cu species. In treated ash, Ca and As were no longer found together, indicating that Ca-arsenates had been dissolved due to the electrodialytic treatment. Instead particles rich in Ca and S were now found, indicating precipitation of Ca-sulphates due to addition of sulphuric acid in connection with the electrodialytic treatment. Cu and Cr were still found associated with incompletely combusted wood particles and incorporated in matrix particles. Chemical analyses of untreated and treated ash confirmed that most As, but only smaller amounts of Cu and Cr was removed due to the electrodialytic extraction. Overall metal contents in the original ash residue were: 1.4 g As, 2.76 g Cu and 2.48 g Cr, after electrodialytic extraction these amounts were reduced by 86% for As, 15% for Cu and 33% for Cr.     

Electro-remediation of tailings from a multi-metal sulphide mine: comparing removal efficiencies of Pb,Zn, Cu and Cd

Sulphidic mine tailings characterised by high concentrations of heavy metals (Pb 3532?±?97?mg/kg, Zn 8450?±?154?mg/kg, Cu 239?±?18?mg/kg and Cd 14.1?±?0.3?mg/kg) and abundant carbonate (17%) were subjected to eight lab-scale electrodialytic remediation (EDR) experiments to investigate the influence of current density, treatment time and particle size on removal efficiency. Pb and Cu removal improved when increasing current density, while Zn and Cd removal did not. In contrast Zn and Cd removal improved by grinding the tailings, while Pb and Cu removal did not. At the highest current density (1.2?mA/cm²), 94%, 75%, 71% and 67% removal of Pb, Zn, Cu and Cd could be achieved, respectively, on grinded tailings in 28 days. Sequential chemical extraction made before and after EDR revealed larger oxidisable fractions of Zn, Cu and Cd, representing large fractions of sulphides, which was likely to be the main barrier to be removed as efficiently as Pb. This was in accordance with acid/base extraction tests in which Pb showed high solubility at both high and low pH (up to 65% and 86% of extraction, respectively), while considerable extraction of Zn (55%) happened only at low pH; and very limited extraction (<20%) of Cu and Cd occurred at any pH.     

High Cu and Cd pollution in sediments from Sisimiut, Greenland. Adsorption to organic matter and fine particles

High concentrations of Cu of up to 200 mg/kg, and Cd of up to 4.0 mg/kg, were found in sediments from the aquatic environment around Sisimiut, Greenland. These concentrations are four times higher than the limiting concentration where toxicological effects are expected. The pollution could be linked to human activities in Sisimiut, a link that have not been investigated previously in Greenland. Except from the most polluted samples there was good correlation between heavy metal concentration and organic matter. Also some relationship between fine fraction and heavy metal concentration was observed.     

Speciation and mobility of cadmium in straw and wood combustion fly ash

Two fly ashes from biomass combustion have been analysed regarding cadmium speciation and mobility. A fly ash from straw combustion contained 10 mg Cd/kg dry matter, and around 50% of the cadmium was leachable in water. The possible main speciation of cadmium in this fly ash was CdCl2. When adding this fly ash to agricultural soil a threat for groundwater contamination and plant uptake is existing. A fly ash from wood chip combustion had 28.6 mg Cd/kg dry matter. In this fly ash, the cadmium was bound more heavily, with only small amounts of cadmium leached in mild extractants. A possible speciation of cadmium in this fly ash was as oxide or as CdSiO3. Long-term effects and accumulation of cadmium could be a problem when adding this fly ash to agricultural or forest soils.     

Screening of heavy metal containing waste types for use as raw material in Arctic clay-based bricks

In the vulnerable Arctic environment, the impact of especially hazardous wastes can have severe consequences and the reduction and safe handling of these waste types are therefore an important issue. In this study, two groups of heavy metal containing particulate waste materials, municipal solid waste incineration (MSWI) fly and bottom ashes and mine tailings (i.e., residues from the mineral resource industry) from Greenland were screened in order to determine their suitability as secondary resources in clay-based brick production. Small clay discs, containing 20 or 40% of the different particulate waste materials, were fired and material properties and heavy metal leaching tests were conducted before and after firing. Remediation techniques (washing in distilled water and electrodialytical treatment) applied to the fly ash reduced leaching before firing. The mine tailings and bottom ash brick discs obtained satisfactory densities (1669–2007 kg/m³) and open porosities (27.9–39.9%). In contrast, the fly ash brick discs had low densities (1313–1578 kg/m³) and high open porosities (42.1–51. %). However, leaching tests on crushed brick discs revealed that heavy metals generally became more available after firing for all the investigated materials and that further optimisation is therefore necessary prior to incorporation in bricks.     

Electrodialytic soil remediation enhanced by low frequency pulse current – Overall chronopotentiometric measurement

The effect of low frequency pulse current on decreasing the polarization and energy consumption during the process of electrodialytic soil remediation was investigated in the present work. The results indicated that the transportation of cations through the cation exchange membrane was the rate controlling step both in constant and pulse current experiments, thus responsible for the major energy consumption. After 180 h, a decrease in both the initial ohmic resistance in each pulse cycle and the resistance caused by concentration polarization of the anion exchange membrane were seen in the pulse current experiment compared to the constant current experiment. At the cation exchange membrane, only the resistance caused by concentration polarization decreased. In the soil compartment, an average of +60 mV overpotential caused by the polarization of the electric double layer of the clay particles was obtained from the Nernstian behavior simulation of the relaxation process, which was significantly lower than the ohmic voltage drop induced by pore fluid resistance. Therefore, the ohmic polarization was the major contributor to the energy consumption in the soil compartment and diminished by pulse current.     

Speciation and leachability of copper in mine tailings from porphyry copper mining: influence of particle size

Mine tailing from the El Teniente-Codelco copper mine situated in VI Region of Chile was analysed in order to evaluate the mobility and speciation of copper in the solid material. Mine tailing was sampled after the rougher flotation circuits, and the copper content was measured to 1150 mg kg (-1) dry matter. This tailing was segmented into fractions of different size intervals: 0-38, 38-45, 45-53, 53-75, 75-106, 106-150, 150-212, and >212 microm, respectively. Copper content determination, sequential chemical extraction, and desorption experiments were carried out for each size interval in order to evaluate the speciation of copper. It was found that the particles of smallest size contained 50-60% weak acid leachable copper, whereas only 32% of the copper found in largest particles could be leached in weak acid. Copper oxides and carbonates were the dominating species in the smaller particles, and the larger particles contained considerable amounts of sulphides.