Use of two different acidic aerosol samplers to measure acidic aerosols in Hsinchu, Taiwan

Acidic aerosol concentrations measured by an annular denuder system (ADS) and a honeycomb denuder system (HDS) in Hsinchu, Taiwan, were compared. Aerosols were also sampled by a MOUDI (micro-orifice uniform deposit impactor) and analyzed by an ion chromatograph to determine the size distributions of different species. Using the measured aerosol size distribution, theoretical analysis showed that positive HNO3 artifact due to volatilization of NH4NO3 is generally negligible for both samplers. Comparing two different denuder samplers, the average concentration of HNO3 measured by the ADS was found to be lower than that measured by the HDS, while the difference between the two samplers for the average concentration of other species was found to be within +/- 15%. A possible cause of the difference in HNO3 concentrations is due to a greater loss of HNO3 in the cyclone used by the ADS than in the impactor used by the HDS. The study also showed incomplete absorption of the evaporated HCl and HNO3 from the particles on the Teflon filter by the first nylon filter in the filter pack of the ADS. Collection efficiency and capacity of HCl and HNO3 by the nylon filters need further investigation.     

The development of stream temperature model in a mountainous river of Taiwan

Formosan landlocked salmon is an endangered species and is very sensitive to stream temperature change. This study attempts to improve a former stream temperature model (STM) which was developed for the salmon’s habitat to simulate stream temperature more realistically. Two modules, solar radiation modification (SRM) and surface/subsurface runoff mixing (RM), were incorporated to overcome the limitation of STM designed only for clear-sky conditions. It was found that daily temperature difference is related to cloud cover and can be used to adjust the effects of cloud cover on incident solar radiation to the ground level. The modified model (STM + SRM) improved the simulation during a baseflow period in both winter and summer with the Nash-Sutcliffe efficiency coefficient improved from 0.37 (by STM only) to 0.71 for the winter and from ?0.18 to 0.70 for the summer. On the days with surface/subsurface runoff, the incorporation of the two new modules together (STM + SRM + RM) improved the Nash-Sutcliffe efficiency coefficient from 0.00 to 0.65 and from 0.29 to 0.83 in the winter and the summer, respectively. Meanwhile, the contributions of major thermal sources to stream temperature changes were identified. Groundwater is a major controlling factor for regulating seasonal changes of stream temperature while solar radiation is the primary factor controlling daily stream temperature variations. This study advanced our understanding on short-term stream temperature variation, which could be useful for the authorities to restore the salmon’s habitat.     

Use of Two Different Acidic Aerosol Samplers To Measure Acidic Aerosols in Hsinchu,Taiwan

ABSTRACT

Acidic aerosol concentrations measured by an annular denuder system (ADS) and a honeycomb denuder system (HDS) in Hsinchu, Taiwan, were compared. Aerosols were also sampled by a MOUDI (micro-orifice uniform deposit impactor) and analyzed by an ion chromatograph to determine the size distributions of different species. Using the measured aerosol size distribution, theoretical analysis showed that positive HNO₃ artifact due to volatiliza-tion of NH₄NO₃ is generally negligible for both samplers.4 3Comparing two different denuder samplers, the average concentration of HNO₃ measured by the ADS was found3to be lower than that measured by the HDS, while the difference between the two samplers for the average concentration of other species was found to be within ±15%. A possible cause of the difference in HNO₃ con-3centrations is due to a greater loss of HNO₃ in the cyclone3 used by the ADS than in the impactor used by the HDS. The study also showed incomplete absorption of the evaporated HCl and HNO₃ from the particles on the Teflon3filter by the first nylon filter in the filter pack of the ADS. Collection efficiency and capacity of HCl and HNO₃ by3the nylon filters need further investigation.     

Factors influencing the preparation of supported iron oxide in fluidized-bed crystallization

Our previous work applied a novel supported iron oxyhydroxide (FeOOH) catalyst to effectively treat benzoic acid by hydrogen peroxide. The FeOOH catalyst was prepared via the oxidation of Fe2+ by H2O2 in the acidic condition using a fluidized-bed crystallization reactor. The major components coated on the surface were identified as amorphous FeOOH and gamma-FeOOH. In terms of the crystallization conditions of FeOOH, some parameters including the operational pH, superficial velocity, specific iron loading, and influent H2O2 concentration were investigated to quantify their effects on the crystallization efficiency. All these parameters were found to significantly influence the crystallization efficiency. Two types of FeOOH catalysts were synthesized: FeOOH I was prepared at pH 3.5, and FeOOH II was formed by aging FeOOH I at pH 13. The percentages of surface amorphous FeOOH reduced from 70% to 30% after aging. The FeOOH II catalyst presented a higher reactivity toward H2O2 but lower stoichiometric efficiency in oxidizing benzoic acid than FeOOH I, similar to the result of the commercial goethite. Therefore, it is concluded that the crystalline property significantly affects the performance of catalytic oxidation.     

Determining the equilibrium partitioning coefficients of volatile organic compounds at an air-water interface

The single equilibration technique (SET) was adopted to determine the partitioning coefficients (pc) at an air-water interface for volatile organic compounds (VOCs), including ethanol, iso-propanol (IPA), iso-butanol (IBA), methyl ethyl ketone (MEK) and toluene, all extensively used in industrial processes. Standard SET procedures were established. The liquid concentrations (CL) of tested VOCs ranged from 10 to 125 mg l(-1) for alcohols and MEK, and from 0.5 to 20 mg l(-1) for toluene. The temperatures (Tw) of aqueous VOC solutions were maintained at 27, 32, 38 and 42 degrees C to determine the gaseous concentrations at equilibrium (Cg*) and pc of VOCs, using the formula pc=(Cg*/CL). Results reveal that the pc values of all tested components increase slowly with Tw given a constant CL, and that the pc of alcohols and MEK fall as CL increases at a constant Tw. In contrast, the pc of toluene is not significantly impacted by a variation in CL at a constant Tw. However, the effect of CL concentration has seldom been discussed. The heats of liquid and gaseous phase transfer (DeltaHtr) of VOC, and the highly linear regression (with squared correlation coefficients, R2, from 0.901 to 0.999) between lnCg* and Tw(-1) are also evaluated. The experimental results and the VOC mass transfer characteristics are helpful for evaluating the emission of VOC from the water surface of wastewater treatment facilities.     

Data mining for occupational injuries in the Taiwan construction industry

There is a higher rate of occupational injury in the construction industry than most other industries on average. However, steps can be taken to reduce worker risk through effective injury prevention strategies. In this article, association rule mining is employed in identifying the characteristics of occupational injuries in the construction industry. Accident reports during the period 1999–2004 are extracted from case reports of the Northern Region Inspection Office of the Council of Labor Affairs of Taiwan. In addition to general factors, several factors related to weather conditions are included in this article. The results show that there are some patterns of occupational injuries in the construction industry. The effect of rain on the occurrence of fatalities is of great significance. Proposed inspection plans should be in accordance with the type of construction and environmental evaluation. The findings identified in this article provide a direction for more effective inspection strategies and injury prevention programs.