Fungicidal values of bio-oils and their lignin-rich fractions obtained from wood/bark fast pyrolysis

Pine wood, pine bark, oak wood and oak bark were pyrolyzed in an auger reactor. A total of 16 bio-oils or pyrolytic oils were generated at different temperatures and residence times. Two additional pine bio-oils were produced at the National Renewable Energy Laboratory in a fluidized-bed reactor at different temperatures. All these bio-oils were fractionated to obtain lignin-rich fractions which consist mainly of phenols and neutrals. The pyrolytic lignin-rich fractions were obtained by liquid-liquid extraction. Whole bio-oils and their lignin-rich fractions were studied as potential environmentally benign wood preservatives to replace metal-based CCA and copper systems that have raised environmental concerns. Each bio-oil and several lignin-rich fractions were tested for antifungal properties. Soil block tests were conducted using one brown-rot fungus (Gloeophyllum trabeum) and one white-rot fungus (Trametes versicolor). The lignin-rich fractions showed greater fungal inhibition than whole bio-oils for a impregnation solution 10% concentration level. Water repellence tests were also performed to study wood wafer swelling behavior before and after bio-oil and lignin-rich fraction treatments. In this case, bio-oil fractions did not exhibit higher water repellency than whole bio-oils. Comparison of raw bio-oils in soil block tests, with unleached wafers, at 10% and 25% bio-oil impregnation solution concentration levels showed excellent wood preservation properties at the 25% level. The good performance of raw bio-oils at higher loading levels suggests that fractionation to generate lignin-rich fractions is unnecessary. At this more effective 25% loading level in general, the raw bio-oils performed similarly. Prevention of leaching is critically important for both raw bio-oils and their fractions to provide decay resistance. Initial tests of a polymerization chemical to prevent leaching showed some success.     

LY12CZ铝合金腐蚀损伤的概率分布及其变化规律

采用铜加速乙酸盐雾试验方法对LY12CZ铝合金腐蚀行为进行了研究。结果表明：腐蚀深度服从Gumbel分布、正态分布、威布尔分布和对数正态4种分布。选用正态分布描述了LY12CZ铝合金在盐雾环境下的腐蚀损伤的分布特性,并得出了不同置信度和可靠度下腐蚀深度随时间变化的规律。     

Assessment of non-occupational exposure to polycyclic aromatic hydrocarbons through personal air sampling and urinary biomonitoring

Non-occupational inhalation and ingestion exposure to polycyclic aromatic hydrocarbons (PAHs) has been studied in 8 non-smoking volunteers through personal air sampling and urinary biomonitoring. The study period was divided into 4 segments (2 days/segment), including weekdays with regular commute and weekends with limited traffic related exposures; each segment had a high or low PAH diet. Personal air samples were collected continuously from the subjects while at home, at work, and while commuting to and from work. All urine excretions were collected as individual samples during the study. In personal air samples, 28 PAHs were measured, and in urine samples 9 mono-hydroxylated metabolites (OH-PAHs) from 4 parent PAHs (naphthalene, fluorene, phenanthrene and pyrene) were measured. Naphthalene was found at higher concentrations in air samples collected at the subjects' residences, whereas PAHs with four or more aromatic rings were found at higher levels in samples taken while commuting. Urinary OH-PAH biomarker levels increased following reported high inhalation and/or dietary exposure. On days with a low PAH diet, the total amount of inhaled naphthalene during each 24-hour period was well correlated with the amount of excreted naphthols, as was, to a lesser extent, fluorene with its urinary metabolites. During days with a high dietary intake, only naphthalene was significantly correlated with its excreted metabolite. These findings suggest that this group of non-occupational subjects were exposed to naphthalene primarily through indoor air inhalation, and exposed to other PAHs such as pyrene mainly through ingestion.     

An assessment of chemical contaminants in sediments from the St. Thomas East End Reserves,St. Thomas,USVI

The St. Thomas East End Reserves or STEER is located on the southeastern end of the island of St. Thomas, USVI. The STEER contains extensive mangroves and seagrass beds, along with coral reefs, lagoons, and cays. Within the watershed, however, are a large active landfill, numerous marinas, resorts, various commercial activities, an EPA Superfund Site, and residential areas, all of which have the potential to contribute pollutants to the STEER. As part of a project to develop an integrated assessment for the STEER, 185 chemical contaminants were analyzed in sediments from 24 sites. Higher levels of chemical contaminants were found in Mangrove Lagoon and Benner Bay in the western portion of the study area. The concentrations of polychlorinated biphenyls (PCBs), dichlorodiphenyltrichloroethane (DDT), zinc, copper, lead, and mercury were above a NOAA Effects Range-Low (ERL) sediment quality guideline at one or more sites, indicating impacts may be present in more sensitive species or life stages. Copper at one site in Benner Bay was above a NOAA Effects Range-Median (ERM) guideline indicating effects on benthic organisms were likely. The antifoulant boat hull ingredient tributyltin (TBT) was found at the third highest concentration in the history of NOAA’s National Status and Trends (NS&T) Program, which monitors the nation’s coastal and estuarine waters for chemical contaminants and bioeffects. The results from this project will provide resource managers with key information needed to make effective decisions affecting coral reef ecosystem health and gauge the efficacy of restoration activities.     

Destruction of halogenated hydrocarbons with solvated electrons in the presence of water

Model halogenated aromatic and aliphatic hydrocarbons and halogenated phenols were dehalogenated in seconds by solvated electrons generated from sodium in both anhydrous liquid ammonia and ammonia/water solutions. The minimum sodium required to completely dehalogenate these model compounds was determined by increasing the Na/substrate ratio until halogen loss was complete. Minimum sodium consumptions were determined in both anhydrous liquid ammonia and with a (5, 20, 50-fold molar excess of water per mole of halide). While more Na was consumed in the presence of water, these dehalogenations were still efficient when a 50-fold water excess was present. Dehalogenation is faster than competiting reactions with water. CCl4 and CH3CCl3 in the presence of a stoichiometric deficiency of sodium produced only CH4 and CH3CH3 and recovered CCl4 or CH3CCl3, respectively. No partially dechlorinated products were detected, indicating dechlorination was diffusion controlled. Na consumption per chlorine removed (as NaCl) was lower than that of Li, K or Ca and this advantage increased in the presence of water. Na consumption was lower using Na chunks instead of a thin Na mirror. Chloroaromatic compounds gave the parent aromatic hydrocarbon and aminated products in anhydrous ammonia but aminated products did not form when water was present.     

Climate change and mining in Canada

Climate is an important component of the operating environment for the Canadian mining sector. However, in recent years mines across Canada have been affected by significant climatic hazards, several which are regarded to be symptomatic of climate change. For the mining sector, climate change is a pressing environmental threat and a significant business risk. The extent to which the mining sector is able to mitigate its own impact and adapt to climate change will affect its long-term success and prosperity, and have profound economic consequences for host communities. This paper draws upon case studies conducted with mining operations in Canada involving in-depth interviews with mining professionals and analysis of secondary sources to characterize the vulnerability of the Canadian mining industry to climate change. Five key findings are discussed: i) mines in the case studies are affected by climate events that are indicative of climate change, with examples of negative impacts over the past decade; ii) most mine infrastructure has been designed assuming that the climate is not changing; iii) most industry stakeholders interviewed view climate change as a minor concern; iv) limited adaption planning for future climate change is underway; v) significant vulnerabilities exist in the post-operational phase of mines. This paper argues for greater collaboration among mining companies, regulators, scientists and other industry stakeholders to develop practical adaptation strategies that can be integrated into existing and new mine operations, including in the post-operational phase.     

The interplay between incremental,transitional, and transformational adaptation: a case study of Canadian agriculture

Regional Environmental Change - We develop and apply a synthetic framework for understanding potential adaptations to climate change in the Canadian agriculture sector through a case study of...     

Forest ecological classification and mapping: Their application for ecosystem management in Newfoundland

A prerequisite to sustaining ecosystems is the inventory and classification of landscape structure and composition. Ecological classification and mapping involves the delineation of landscapes into easily recognizable units. Topography, soils, vegetation, physical landscape form, and successional pathways are delineation criteria commonly used.Damman (1967) developed a forest type classification system for Newfoundland using vegetation, soil and landforms as the defining criteria. Damman's forest types were used in combination with mensurational data to assign forest types to timber volume productivity classes. Since each of the Damman forest types is associated with characteristic soils, parent materials, moisture regime and topographic position, the mapping units are similar to Canada Land Inventory (CLI) mapping units. Field work to confirm the correlation between Damman forest types and CLI capability classes was initiated in 1993. CLI maps were recoded in 1994 and Damman forest types were determined; resulting ecosystem-based maps provide a common framework to assess forestry/wildlife interactions in an ecosystem planning process.     

呼和浩特市"城中村"环境污染现状及防治对策

本文介绍了呼和浩特市"城中村"污染的现状及存在的问题,并提出了切实可行的解决办法.     

Protected area planning to conserve biodiversity in an uncertain future

Protected areas are a key instrument for conservation. Despite this, they are vulnerable to risks associated with weak governance, land-use intensification, and climate change. We used a novel hierarchical optimization approach to identify priority areas for expanding the global protected area system that explicitly accounted for such risks while maximizing protection of all known terrestrial vertebrate species. To incorporate risk categories, we built on the minimum set problem, where the objective is to reach species distribution protection targets while accounting for 1 constraint, such as land cost or area. We expanded this approach to include multiple objectives accounting for risk in the problem formulation by treating each risk layer as a separate objective in the problem formulation. Reducing exposure to these risks required expanding the area of the global protected area system by 1.6% while still meeting conservation targets. Incorporating risks from weak governance drove the greatest changes in spatial priorities for protection, and incorporating risks from climate change required the largest increase (2.52%) in global protected area. Conserving wide-ranging species required countries with relatively strong governance to protect more land when they bordered nations with comparatively weak governance. Our results underscore the need for cross-jurisdictional coordination and demonstrate how risk can be efficiently incorporated into conservation planning. Planeación de las áreas protegidas para conservar la biodiversidad en un futuro incierto