New best estimates for radionuclide solid–liquid distribution coefficients in soils. Part 3: miscellany of radionuclides (Cd,Co, Ni,Zn, I,Se, Sb,Pu, Am,and others)

New best estimates for the solid–liquid distribution coefficient (K_d) for a set of radionuclides are proposed, based on a selective data search and subsequent calculation of geometric means. The K_d best estimates are calculated for soils grouped according to the texture and organic matter content. For a limited number of radionuclides this is extended to consider soil cofactors affecting soil–radionuclide interaction, such as pH, organic matter content, and radionuclide chemical speciation. Correlations between main soil properties and radionuclide K_d are examined to complete the information derived from the best estimates with a rough prediction of K_d based on soil parameters. Although there are still gaps for many radionuclides, new data from recent studies improve the calculation of K_d best estimates for a number of radionuclides, such as selenium, antimony, and iodine.     

Remediation of metal-contaminated soils with the addition of materials - part II: leaching tests to evaluate the efficiency of materials in the remediation of contaminated soils

The effect of the addition of materials on the leaching pattern of As and metals (Cu, Zn, Ni, Pb, and Cd) in two contaminated soils was investigated. The examined materials included bentonites, silicates and industrial wastes, such as sugar foam, fly ashes and a material originated from the zeolitization of fly ash. Soil + material mixtures were prepared at 10% doses. Changes in the acid neutralization capacity, crystalline phases and contaminant leaching over a wide range of pHs were examined by using pH_stat leaching tests. Sugar foam, the zeolitic material and MX-80 bentonite produced the greatest decrease in the leaching of pollutants due to an increase in the pH and/or the sorption capacity in the resulting mixture. This finding suggests that soil remediation may be a feasible option for the reuse of non-hazardous wastes.     

An overview of the effect of organic matter on soil-radiocaesium interaction: implications in root uptake

This paper aims to give an overview of the effect of organic matter on soil-radiocaesium interaction and its implications on soil-to-plant transfer. Studies carried out after the Chernobyl accident have shown that high 137CS soil-to-plant transfer persists in organic soils over years. In most of these soils, the specific sites in clays control radiocaesium adsorption, organic compounds having an indirect effect. Only in organic soils with more than 95% of organic matter content and negligible clay content does adsorption occur mostly on non-specific sites. After a contamination event, two main factors account for the high transfer: the low solid-liquid distribution coefficient, which is due to the low clay content and high NH4+ concentration in the soil solution, and the low K+ availability, which enhances root uptake. The estimation of the reversibly adsorbed fraction, by means of desorption protocols, agrees with the former conclusions, since it cannot be correlated with the organic matter content and shows the lack of specificity of the adsorption in the organic phase. Moreover, the time-dependent pattern of the exchangeable fraction is related to soil-plant transfer dynamics.     

Remediation of metal-contaminated soils with the addition of materials--part I: characterization and viability studies for the selection of non-hazardous waste materials and silicates

Contamination episodes in soils require interventions to attenuate their impact. These actions are often based on the addition of materials to increase contaminant retention in the soil and to dilute the contaminant concentration. Here, non-hazardous wastes (such as sugar foam, fly ash and a material produced by the zeolitization of fly ash) and silicates (including bentonites) were tested and fully characterized in the laboratory to select suitable materials for remediating metal-contaminated soils. Data from X-ray fluorescence (XRF), N₂ adsorption/desorption isotherms, X-ray diffraction (XRD) and scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM-EDX) analyses revealed the chemical composition, specific surface area and the phases appearing in the materials. A pH titration test allowed the calculation of their acid neutralization capacity (ANC). The metal sorption and desorption capacities of the waste materials and silicates were also estimated. Sugar foam, fly ash and the zeolitic material were the best candidate materials. Sugar foam was selected because of its high ANC (17 000 meq kg⁻¹), and the others were selected because of their larger distribution coefficients and lower sorption reversibilities than those predicted in the contaminated soils.     

Leaching of heavy metals and alkylphenolic compounds from fresh and dried sewage sludge

Reusing sewage sludge as a soil fertiliser has become a common alternative to disposal. Although this practice has a few benefits, it may contribute to the medium- and long-term contamination of the trophic chain because sewage sludge may contain heavy metals and organic contaminants. As the leaching of contaminants may depend on the sludge pre-treatment, the leaching of heavy metals (Cu, Ni, Pb, Zn and Cr) and alkylphenolic compounds (APCs) (octylphenol (OP), nonylphenol (NP), nonylphenol-mono-ethoxylate (NP₁EO)) was investigated in five fresh and 40 °C dried sewage sludge samples from north-eastern Spain. FT-IR analyses and full-scan GC-MS chromatograms showed that sludge drying changed the nature of organic compounds leading to changes in their solubility. Moreover, sludge drying led to a higher relative contribution of dissolved organic carbon than the particulate organic carbon in the leachates. Leaching of Pb, Zn and Cr was below 5 % in both fresh and dried sludge samples, whereas Cu and Ni leached at rates up to 12 and 43 %, respectively, in some of the dried sludge samples. The leaching yields of OP, NP and NP₁EO ranged from 1.3 to 35 % for fresh samples, but they decreased from 0.8 to 3.4 % in dried samples. The decrease in the leachability of APCs observed in dried sludge samples might be attributed to the fact that these compounds are associated with particulate organic matter, with significantly lower concentration or even absent in dried sludge than in fresh sludge samples. Therefore, it is recommended to dry the sludge before its disposal.     

Sorption of perfluoroalkyl substances in sewage sludge

The sorption behaviour of three perfluoroalkyl substances (PFASs) (perfluorooctanesulfonic acid (PFOS), perfluorooctanoic acid (PFOA) and perfluorobutanesulfonic acid (PFBS)) was studied in sewage sludge samples. Sorption isotherms were obtained by varying initial concentrations of PFOS, PFOA and PFBS. The maximum values of the sorption solid–liquid distribution coefficients (K_d,max) varied by almost two orders of magnitude among the target PFASs: 140–281 mL g^?1 for PFOS, 30–54 mL g^?1 for PFOA and 9–18 mL g^?1 for PFBS. Freundlich and linear fittings were appropriate for describing the sorption behaviour of PFASs in the sludge samples, and the derived K_F and K_d,linear parameters correlated well. The hydrophobicity of the PFASs was the key parameter that influenced their sorption in sewage sludge. Sorption parameters and log(K_OW) were correlated, and for PFOS (the most hydrophobic compound), pH and Ca?+?Mg status of the sludge controlled the variation in the sorption parameter values. Sorption reversibility was also tested from desorption isotherms, which were also linear. Desorption parameters were systematically higher than the corresponding sorption parameters (up to sixfold higher), thus indicating a significant degree of irreversible sorption, which decreased in the sequence PFOS?>?PFOA?>?PFBS.     

The use of hard- and soft-modelling to predict radiostrontium solid-liquid distribution coefficients in soils

The solid-liquid distribution coefficient (K_d) is the parameter that governs the incorporation of contaminants in soils. Its estimation allows the prediction of the fate of contaminants in the short- and long-term after a contamination event. Here, the K_d of radiostrontium (K_d(Sr)), a radionuclide of significant environmental interest, was predicted by hard models, which are based on knowledge of the mechanisms governing its sorption, and by soft models based on Partial Least Squares (PLS), using a large data set with the main soil parameters. The two approaches were tested and compared for 30 soils in Spain. Correlations between the predicted and experimental values of K_d(Sr) obtained using hard- and soft-modelling showed slopes close to 1 and regression coefficients higher than 0.95, which confirms that both approaches are able to obtain satisfactory estimates for K_d(Sr) from soil parameters.     

New best estimates for radionuclide solid–liquid distribution coefficients in soils. Part 2. Naturally occurring radionuclides

Predicting the transfer of radionuclides in the environment for normal release, accidental, disposal or remediation scenarios in order to assess exposure requires the availability of an important number of generic parameter values. One of the key parameters in environmental assessment is the solid liquid distribution coefficient, K_d, which is used to predict radionuclide–soil interaction and subsequent radionuclide transport in the soil column. This article presents a review of K_d values for uranium, radium, lead, polonium and thorium based on an extensive literature survey, including recent publications. The K_d estimates were presented per soil groups defined by their texture and organic matter content (Sand, Loam, Clay and Organic), although the texture class seemed not to significantly affect K_d. Where relevant, other K_d classification systems are proposed and correlations with soil parameters are highlighted. The K_d values obtained in this compilation are compared with earlier review data.     

Comparison of leaching tests for the study of trace metals remobilisation in soils and sediments

Several leaching tests were applied and compared to study metal remobilisation on various unpolluted and contaminated soils and on several contaminated sediments. The trace elements considered were Cd, Cr, Cu, Ni, Pb and Zn, and leaching tests consisted of the application of reagents with contrasting characteristics and strengths in order to assess the information provided. An extraction with aqua regia permitted the estimation of the pseudo-total metal content in the sample. Mild extractants such as H2O, CaCl2 and NaNO3 showed low and similar leaching capacities. Acid (CH3COOH) and complexing (EDTA) agents were more effective in remobilising trace metals from soils and sediments. Cd and Zn showed similar extraction characteristics under both extractant solutions, whereas Cu and Pb were more sensitive to complexation, and Ni and Cr to acidification processes. Sequential chemical extractions provided additional information on the association of the trace elements with the different soil and sediment phases. Cd and Zn showed the highest mobility, Pb was associated to reducible solid phases, Cu and Ni to oxidisable phases, and Cr remained mostly in the residual fraction. The results obtained in this paper provided valuable information for choosing a leaching test, which is an instrument of environmental analysis for the estimation of trace metal mobility.     

Soil- and plant-based countermeasures to reduce 137Cs and 90Sr uptake by grasses in natural meadows: the REDUP project.

The effectiveness of a set of soil- and plant-based countermeasures to reduce 137Cs and 90Sr transfer to plants was tested in natural meadows in the area affected by Chernobyl fallout. Countermeasures comprised the use of agricultural practices (disking + ploughing, liming and NPK fertilisation), addition of soil amendments and reseeding with a selection of grass species. Disking + ploughing was the most effective treatment, whereas the K fertiliser doses applied were insufficient to produce a significant increase in K concentration in soil solution. The application of some agricultural practices was economically justifiable for scenarios with a high initial transfer, such as 137Cs-contaminated organic soils. The use of soil amendments did not lead to a further decrease in transfer. Laboratory experiments demonstrated that this was because of their low radionuclide sorption properties. Finally, experiments examining the effect of plant species on radionuclide transfer showed that both transfer and biomass can depend on the plant species, indicating that those with high radionuclide root uptake should be avoided when reseeding after ploughing.