Distribution of PAHs and trace metals in urban stormwater sediments: combination of density fractionation,mineralogy and microanalysis

Sediment management from stormwater infiltration basins represents a real environmental and economic issue for stakeholders due to the pollution load and important tonnages of these by-products. To reduce the sediment volumes to treat, organic and metal micropollutant-bearing phases should be identified. A combination of density fractionation procedure and microanalysis techniques was used to evaluate the distribution of polycyclic aromatic hydrocarbons (PAHs) and trace metals (Cd, Cr, Cu, Ni, Pb, and Zn) within variable density fractions for three urban stormwater basin sediments. The results confirm that PAHs are found in the lightest fractions (d?d??3) whereas trace metals are equally distributed within the light, intermediary, and highest fractions (d?d?d?d?>?2.8 g cm^?3) and are mostly in the 2.3?d??3 fraction. The characterization of the five fractions by global analyses and microanalysis techniques (XRD and MEB-EDX) allowed us to identify pollutant-bearing phases. PAHs are bound to the organic matter (OM) and trace metals to OM, clays, carbonates and dense particles. Moreover, the microanalysis study underlines that OM is the main constituent responsible for the aggregation, particularly for microaggregation. In terms of sediment management, it was shown that density fractionation is not suitable for trace metals but could be adapted to separate PAH-enriched phases.     

Micropollutants in urban stormwater: occurrence,concentrations, and atmospheric contributions for a wide range of contaminants in three French catchments

This study aimed at: (a) providing information on the occurrence and concentration ranges in urban stormwater for a wide array of pollutants (n?=?77); (b) assessing whether despite the differences between various catchments (land use, climatic conditions, etc.), the trends in terms of contamination level are similar; and (c) analyzing the contribution of total atmospheric fallout (TAF) with respect to sources endogenous to this contamination. The studied contaminants include conventional stormwater contaminants (polycyclic aromatic hydrocarbons (PAHs), Zn, Cu, Pb, etc.), in addition to poorly or undocumented pollutants such as nonylphenol and octylphenol ethoxylates (NPnEO and OPnEO), bisphenol A (BPA), polybrominated diphenyl ethers (PBDEs), a wide variety of pesticides, and various metals of relevance (As, Ti, Sr, V). Sampling and analysis were performed using homogeneous methods on three urban catchments with different land use patterns located in three distinct French towns. For many of these pollutants, the results do not allow highlighting a significant difference in stormwater quality at the scale of the three urban catchments considered. Significant differences were, however, observed for several metals (As, Cr, Cu, Ni, Sr and Zn), PAHs, and PBDEs, though this assessment would need to be confirmed by further experiments. The pollutant distributions between dissolved and particulate phases were found to be similar across the three experimental sites, thus suggesting no site dependence. Lastly, the contributions of TAF to stormwater contamination for micropollutants were quite low. This finding held true not only for PAHs, as previously demonstrated in the literature, but also for a broader range of molecules such as BPA, NPnEO, OPnEO, and PBDEs, whose high local production is correlated with the leaching of urban surfaces, buildings, and vehicles.     

An investigation of the origin and mobility of phosphorus in freshwater sediments from Bort-Les-Orgues Reservoir, France

In order to assess the origin and the potential mobility of phosphorus (P) in the sediment of the Bort-Les-Orgues Reservoir, France, two sequential extraction schemes, i.e., the SMT (modified Williams method) and the Golterman schemes, were compared. Finally, the potential mobility of P in this sediment was estimated from results of sequential extraction. The SMT method appeared to be more satisfactory than the Golterman method, which is in accordance with results from a study currently carried out in the framework of the European programme Standards, Measurements and Testing. Iron-bound P and organic P were the dominant forms of P in the sediment; these forms are likely to be released at the sediment/water interface in case of anoxia and could diffuse into the water column, thus increasing the risk of eutrophication in this sensitive reservoir. The P stock (330 +/- 66 t) is not negligible and should be taken into account in any restoration project of the reservoir. The SMT procedure seems promising and will provide, in the near future, a valuable tool for water managers in the field of lake restoration.     

Characterization of the organic matter of sludge: determination of lipids, hydrocarbons and PAHs from road retention/infiltration ponds in France

This paper presents the results of the organic matter characterization of sludge from two ponds (retention and infiltration) located in France. Special focus was placed on studying hydrocarbons and PAHs. This investigation is part of a global project on road and urban sludge with the aim of identifying a better means for managing these materials. Gas chromatographic and GC/MS analyses indicate that the main component of the organic fraction stems from petroleum-derived products like diesel fuel and motor oil. This finding was confirmed by the presence of biomarkers from the hopane series, as well as by pyrolytic and alkylated PAHs. Results from this study clearly show that the contaminants are mainly generated from anthropogenic petroleum sources. Due to their levels of hydrocarbon contamination, these sludge deposits must be considered as waste and cannot therefore be disposed anywhere, especially within the current context of sustainable development.     

Development of a harmonised phosphorus extraction procedure and certification of a sediment reference material

A harmonised procedure for the determination of the forms of phosphorus in freshwater sediments, developed in the frame of the European Programme, Standards, Measurements and Testing (SMT) has been used for a certification campaign for a reference material. This operationally defined scheme is a good compromise between method performance and reproducibility. Furthermore, the method is rather simple to implement and could be used by water managers on a routine basis. A homogeneous and stable sediment reference material has been prepared and will be available before mid 2001. The so-called SMT protocol, together with the reference material, are useful tools in the field of water management, especially at a time when quality assurance is of paramount importance in laboratory analyses. Knowledge of the bioavailable forms of phosphorus is important not only for analysis of sediments but also for sludge and soils. Therefore, the SMT protocol could be extended to these materials.     

Review on physical and chemical characterizations of contaminated sediments from urban stormwater infiltration basins within the framework of the French observatory for urban hydrology (SOERE URBIS)

Urban stormwater infiltration basins are designed to hold runoff from impervious surfaces and allow the settling of sediments and associated pollutants. However concerns have been expressed about the environmental impacts that may be exerted by the trapped pollutants on groundwater, soils and ecosystems. In this context, sediment characterization represents a key issue for local authorities in terms of management strategies. During the last two decades, several studies were launched including either physical or chemical characterization of stormwater sediments but without real synthesis of data and methods used. Consequently, there is an important need for reviewing the current experimental techniques devoted to the physico-chemical characterization of sediment. The review is based on the outcomes of two experimental sites for which long term monitoring and data collection have been done: the Cheviré basin (near Nantes) and the Django Reinhardt basin (near Lyon). The authors summarize the studies dealing with bulk properties, pollutant contents, their potential mobility and speciation. This paper aims at promoting the significant progresses that were made through a multidisciplinary approach involving multi-scaled and combined experimental techniques.     

Geoconservation versus legislation and resources policy: New achievements,new questions—Comment on Cairncross (Resources Policy, 2011) The National Heritage Resource Act (1999): Can legislation protect South Africa's rare geoheritage resources?

In his recent article, Cairncross identified problems with legislation relevant to the conservation of national geological heritage. This permits us to pose some more general questions, which are not addressed in the noted contribution. The example given by Cairncross indicates some pitfalls linked with the “all-inclusive” nature of legislation in which geological heritage is mixed with cultural heritage. Are such laws really helpful? Even if they are inevitable, they should be prepared with great caution. Moreover, it appears sensible to discuss whether particular geological objects or geodiversity as a whole should be legally conserved. Cairncross also proposes the interesting idea of a special fund/agency for purchasing rare mineral specimens for museums. This raises a set of questions about selection criteria for minerals to be purchased, types of market to be dealt with, number of fund/agency staff, necessary financial resources, and the administration of such purchasing schemes. Broad multi-stakeholder debates are necessary in order to establish the proposed fund/agency and to facilitate its efficient work.     

Selection and evaluation of sequential extraction procedures for the determination of phosphorus forms in lake sediment

In order to achieve comparable measurements in the determination of phosphate forms in freshwater sediments, the Standards, Measurements and Testing Programme (formerly BCR) of the European Commission has launched a project the first step of which was to select and evaluate collaboratively existing extraction procedures. This was carried out through expert consultations and a literature survey, and was followed by the organisation of a first interlaboratory study for the evaluation of four sequential extraction schemes, one of which was selected as the most promising method for achieving comparability. This scheme, a modified version of the Williams protocol, was further tested in a second interlaboratory study. The so-called SMT extraction scheme seems promising and will provide, in the near future, a valuable tool for water managers in the field of lake restoration. It will be particularly helpful in estimating the stock of P potentially available, hence the risk of eutrophication due to internal P release.