ARSENIC CONSUMPTION AND HEALTH RISK PERCEPTIONS IN A RURAL WESTERN U.S. AREA1

ABSTRACT: Churchill County, Nevada, has approximately 23,000 residents, among whom an estimated 13,500 relied on private wells for water supply in 2002. This study examined exposure to arsenic in water supplies among residents with private domestic wells and factors related to householder choice to consume tap water. It compared opinions and concerns about water quality with consumption habits and observed concentrations from tap water samples. The results from 351 households indicated that a majority (75 percent) of respondents consumed tap water and that a minority (38 percent) applied treatment. Approximately 66 percent of those who consumed tap water were exposed to concentrations of arsenic that exceeded 10 ppb. Water consumption was related to application of treatment. Among 98 respondents who were not at all concerned about the health effects of aqueous arsenic, 59 (60 percent) reported consuming tap water with concentrations of arsenic exceeding 10 ppb. Conversely, among 86 respondents who were highly concerned about arsenic, 33 (37 percent) consumed tap water with concentrations of arsenic exceeding 10 ppb. Results from a national sampling effort showed that 620 of 5,304 private wells sampled (11.7 percent) had arsenic concentrations above 10 ppb. The paradox of awareness of arsenic in water supplies coupled with consumption of aqueous arsenic in concentrations greater than 10 ppb may be common in other parts of the nation. Enhanced educational efforts, especially related to tap water sampling and explanations of efficacy of available treatment, may be useful means of reducing exposure through private water supplies.     

Air pollution exposure monitoring and estimation. Part VI. Ambient exposure of adults in an industrialised region

This paper presents methodology and results of a dynamic individual air pollution exposure model (DINEX) that calculates the hourly exposure for each adult in a panel study. Each of over 260 participants, through the use of a diary, provided information used in the model to calculate his/her personal, individualised exposure. The participants filled out the diary daily, hour by hour, over two, two month periods. The exposure assessment model coupled the diary information and results of an indoor/outdoor measurement program, with the results of dispersion modelling on an hourly basis for an industrial area in Norway. The estimated air pollution concentrations from the dispersion model, based on continuous meteorological measurements, were calibrated with air pollutant concentrations measured continuously.     

Transvaginal chorionic villus sampling

Chorionic villus sampling (CVS) with either transcervical catheters or transabdominal needles is a widely-accepted method for prenatal diagnosis. However, there exists a small subset of patients in whom sampling is difficult or impossible with either route because of individual anatomic variations. A new method of chorionic villus biopsy has been developed to circumvent these problems, utilizing transvaginal chorionic needle aspiration guided by an intravaginal ultrasound probe. This technique was performed successfully in 15 patients in whom villi could not be obtained by either of the conventional methods. This method now makes CVS possible in essentially all women regardless of their uterine anatomy or placental placement; it may also prove useful for very early chorionic sampling.     

Trisomy 7 in chorionic villi: Follow-up studies of pregnancy,normal child,and placental clonal anomalies

Cytogenetic study of chorionic villi sampled because of advanced maternal age revealed, after overnight culture, an apparently non-mosaic trisomy 7. Amniocentesis showed exclusively normal mitoses, and the pregnancy continued normally. One hundred mitoses from cord blood of the normal newborn revealed a non-mosaic 46,XX complement. No cells with a proven trisomy 7 were found in cultures from either of two biopsies of the morphologically normal placenta, but the peripheral biopsy showed in multiple cultures an abnormal clone: 47,XX, + 20,-2,-21, + t(2;21)(p13;q22). To our knowledge, this is the first case of non-mosaic trisomy 7 detected on CVS which has had follow-up studies of amniotic fluid, cord blood, and term placenta.     

Evaluation of simplifying assumptions on pesticide degradation in soil

There is evidence that degradation of pesticides in simple laboratory systems may differ from that in the field, but it is not clear which of the simplifications inherent in laboratory studies present serious shortcomings. Laboratory experiments evaluated several simplifying assumptions for a clay loam soil and contrasting pesticides. Degradation of cyanazine [2-(4-chloro-6-ethylamino-1,3,5-triazin-2-ylamino)-2-methylpropiononitrile] and bentazone [3-isopropyl-1H-2,1,3-benzothiadiazin-4(3H)-one 2,2-dioxide] at fluctuating temperature and moisture was predicted reasonably well based on parameters derived from degradation under constant conditions. There was a tendency for slower degradation of cyanazine and bentazone in soil aggregates of 3 to 5 mm in diameter (DT50 at 15 degrees C and 40% maximum water holding capacity of 25.1 and 58.2 d, where DT50 is the time for 50% decline of the initial pesticide concentration) than in soil sieved to <3 mm (DT50 of 19.1 and 37.6 d), but the differences were not significant for most datasets. Degradation of cyanazine, isoproturon [3-(4-isopropylphenyl)-1,1-dimethylurea], and chlorotoluron [3-(3-chloro-p-tolyl)-1,1-dimethylurea] was measured in soil amended with different amounts of lignin. The effect of lignin on degradation was small despite considerable differences in sorption. The DT50 values of cyanazine, isoproturon, and chlorotoluron were 16.2, 18.6, and 33.0 d, respectively, in soil without lignin and 19.0, 23.4, and 34.6 d, respectively, in soil amended with 2% lignin. Degradation of bentazone and cyanazine in repacked soil columns was similar under static and flow conditions with 50.1 and 47.2% of applied bentazone and 74.7 and 73.6% of applied cyanazine, respectively, degraded within 20 d of application. Thus, the assumptions underpinning laboratory to field extrapolation tested here were considered to hold for our experimental system. Additional work is required before general conclusions can be drawn.     

Contaminant mass flux and forensic assessment of polycyclic aromatic hydrocarbons: Tools to inform remediation decision making at a contaminated site in Canada

Polycyclic aromatic hydrocarbons (PAHs) and metal(loid) mass flux estimates and forensic assessment using PAH diagnostic ratios were used to inform remediation decision making at the Sydney Tar Ponds (STPs) and Coke Ovens cleanup project in eastern Canada. Environmental effects monitoring of surface marine sediments in Sydney Harbor indicated significantly higher PAH concentrations during the first year of remediation monitoring compared to baseline. This was equivalent to PAH loadings of ～2,000 kg over a 15‐month period. Increases in sediment PAH concentrations raised serious concerns for regulators, who requested cessation of remediation activities early in the $400 M (CAD) project. Historically, the STPs were reported as the primary source of PAH contamination in Sydney Harbor with estimated discharges of 300 to 800 kg/year between 1989 and 2001. Mass flux estimates of PAHs and metal(loid)s and PAH diagnostic ratios were used to evaluate if increases in PAH concentrations in marine sediments were the result of the STPs remediation activities. PAH mass flux estimates approximated that 17 to 97 kg/year were discharged from the STPs during three years of remediation and were corroborated by an independent PAH flux estimate of 119 kg in year 1. PAH fluxes to the Sydney Harbor were mostly surface water derived, with groundwater contributing negligible quantities (0.002–0.005 kg/year). Fluxes of metal(loid)s to harbor sediments were stable or declining across all years and were mirrored in sediment metal(loid) concentrations, which lacked temporal variation, unlike total PAH concentrations. Flux results were also corroborated using PAH diagnostic ratios, which found a common source of PAHs. Coal combustion was likely the principal source of PAHs and not migration from the STPs during remediation. Although short‐term residual sediment PAH increases during onset of remediation raised concerns for regulators, calls for premature cessation of remediation early in the project were unwarranted based on only one year of monitoring data. Mass flux estimates and forensic assessments using PAH diagnostic ratios proved useful tools to inform remediation decision making that helped environmental protection and reduced costs associated with lost cleanup time.     

Environmental Effects Monitoring in Sydney Harbor During Remediation of One of Canada's Most Polluted Sites: A Review and Lessons Learned

This article reviews a comprehensive marine environmental effects monitoring program (MEEMP) comprised of components capable of detecting changes in the marine environment over short or extended temporal scales during remediation of one of Canada's most polluted sites at the Sydney Tar Ponds. The monitoring components included: water and sediment quality, amphipod toxicity testing, mussel tissue, crab hepatopancreas tissue, and benthic community assessments. The MEEMP was designed to verify the impact predictions for the remediation project (i.e., no immediate damage to the marine ecosystem through remediation activities). Some components were capable of providing conclusive data (e.g., sediment and water quality), while others only yielded data that were inconclusive or difficult to attribute to remediation activities (e.g., intertidal community assessments and amphipod toxicity testing). Components that provided only inconclusive results or were difficult to attribute to remediation activities were discontinued, resulting in substantial cost savings during the project, but without compromising the overall objectives of the program, which was to monitor for potential adverse environmental effects of remediation on the marine environment in Sydney Harbor and to verify environmental effects predictions made in the Environmental Impact Statement for the project. The rationale for discontinuing certain MEEMP components and discussion of conclusive results are incorporated into “lessons learned” for environmental remediation practitioners and regulators working on similar large‐scale multiyear remediation projects. © 2014 Wiley Periodicals, Inc.     

Optimizing Messaging to Reduce Red Meat Consumption

Red meat production has a range of negative environmental impacts. We sought to characterize the motivations, environmental attitudes and demographics of red meat-eaters, and examine the effect of message framing in reducing future meat consumption. Canadian adult meat-eaters (593) completed a survey and were randomly assigned to one of six message treatments that presented information on the environmental impacts of meat production using frames representing social norms and/or place identity constructs. Taste and quality were the most important motivators for eating meat, while moral/ethical factors were the least. Forty-nine percent of respondents indicated they would reduce red meat intake after exposure to an information only message, while the social norms frame was more effective than others (χ2). Awareness of the environmental effects increased significantly after messaging for all 13 impacts. These findings should assist communicators with designing more effective messaging aimed at encouraging pro-environmental behaviours associated with meat consumption.