Simulations of the flow in the Mahakam river–lake–delta system,Indonesia

Large rivers often present a river–lake–delta system, with a wide range of temporal and spatial scales of the flow due to the combined effects of human activities and various natural factors, e.g., river discharge, tides, climatic variability, droughts, floods. Numerical models that allow for simulating the flow in these river–lake–delta systems are essential to study them and predict their evolution under the impact of various forcings. This is because they provide information that cannot be easily measured with sufficient temporal and spatial detail. In this study, we combine one-dimensional sectional-averaged (1D) and two-dimensional depth-averaged (2D) models, in the framework of the finite element model SLIM, to simulate the flow in the Mahakam river–lake–delta system (Indonesia). The 1D model representing the Mahakam River and four tributaries is coupled to the 2D unstructured mesh model implemented on the Mahakam Delta, the adjacent Makassar Strait, and three lakes in the central part of the river catchment. Using observations of water elevation at five stations, the bottom friction for river and tributaries, lakes, delta, and adjacent coastal zone is calibrated. Next, the model is validated using another period of observations of water elevation, flow velocity, and water discharge at various stations. Several criteria are implemented to assess the quality of the simulations, and a good agreement between simulations and observations is achieved in both calibration and validation stages. Different aspects of the flow, i.e., the division of water at two bifurcations in the delta, the effects of the lakes on the flow in the lower part of the system, the area of tidal propagation, are also quantified and discussed.     

Plant-mediated and nonadditive effects of two global change drivers on an insect herbivore community

Warmer temperatures can alter the phenology and distribution of individual species. However, differences across species may blur community-level phenological responses to climate or cause biotic homogenization by consistently favoring certain taxa. Additionally, the response of insect communities to climate will be subject to plant-mediated effects, which may or may not overshadow the direct effect of rising temperatures on insects. Finally, recent evidence for the importance of interaction effects between global change drivers suggests that phenological responses of communities to climate may be altered by other drivers. We used a natural temperature gradient (generated by elevation and topology), combined with experimental nitrogen fertilization, to investigate the effects of elevated temperature and globally increasing anthropogenic nitrogen deposition on the structure and phenology of a seminatural grassland herbivore assemblage (lepidopteran insects). We found that both drivers, alone and in combination, severely altered how the relative abundance and composition of species changed through time. Importantly, warmer temperatures were associated with biotic homogenization, such that herbivore assemblages in the warmest plots had more similar species composition than those in intermediate or cool plots. Changes in herbivore composition and abundance were largely mediated by changes in the plant community, with increased nonnative grass cover under high treatment levels being the strongest determinant of herbivore abundance. In addition to compositional changes, total herbivore biomass more than doubled under elevated nitrogen and increased more than fourfold with temperature, bearing important functional implications for herbivores as consumers and as a prey resource. The crucial role of nonnative plant dominance in mediating responses of herbivores to change, combined with the frequent nonadditive (positive and negative) effects of the two drivers, and the differential responses of species, highlight that understanding complex ecosystem responses will benefit from multifactor, multitrophic experiments at community scales or larger.     

Wastewater treatment by catalytic wet air oxidation process over Al-Fe pillared clays synthesized using microwave irradiation

Microwave irradiation has been used to prepare Al, Fe-pillared clays from a natural Tunisian smectite from the El Hicha deposit (province of Gabes). Chemical analysis, XRD spectra and surface properties evidenced the success of pillaring process. The obtained solids present higher surface area and pore volume than conventionally prepared Al-Fe pillared clays. The main advantages of the microwave methodology are the considerable reduction of the synthesis time and the consumption of water. The microwave-derived Al-Fe pillared clays have been tested for catalytic wet air oxidation (CWAO) of phenol in a stirred tank at 160°C and 20 bar of pure oxygen pressure. These materials are efficient for CWAO of phenol and are highly stable despite the severe operating conditions (acidic media, high pressure, high temperature). The catalyst deactivation was also significantly hindered when compared to conventionally prepared clays. Al-Fe pillared clays prepared by microwave methodology are promising as catalysts for CWAO industrial water treatment.

Open image in new window

     

On the influence of chemical initial and boundary conditions on annual regional air quality model simulations for North America

The influence of chemical initial conditions and chemical lateral boundary conditions (CLBCs) on long-term regional air quality model simulations was investigated using outputs from an annual simulation of the year 2002 on a North American domain. This simulation was carried out using the AURAMS regional air quality model. It was subdivided into three multi-month segments with two overlap periods (May 15–30 and September 1–30) to allow the segments to be run in parallel. For this approach to work, model predictions had to match very closely by the end of the two-week and four-week overlap periods. The time required for the values of daily domain-average surface PM_2.5 concentration to match for the two simulation segments associated with each of the two overlap periods was four and six days, respectively. For individual locations within the model domain, however, the required spin-up period was as much as nine days, considerably longer than the 2–4-day spin-up period usually assumed in the literature. For ozone, on the other hand, the daily domain-average surface ozone concentration values did not converge for either overlap period. A zero-gradient CLBC had been used for all run segments and species. When a time-invariant CLBC for ozone was used instead, the daily domain-average surface ozone concentration values behaved more realistically and did converge after fewer than three days. A similar improvement was also obtained for individual locations, but with spin-up periods of up to nine days. Model chemical spin-up time thus seems to be dependent on the species considered, the time required for the influence of the inflow boundaries to reach all locations within the domain, and the impact of local emissions sources. These results suggest the use of a spin-up period of longer than one week for a large (continental) domain and long-term simulation of PM_2.5 and O₃ rather than the 2–4 days commonly assumed in the literature.     

Heavy metal accumulation and histomorphological alterations in Aphanius fasciatus (Pisces,Cyprinodontidae) from the Gulf of Gabes (Tunisia)

The present study illustrates an analysis of histological changes; cadmium (Cd), copper (Cu) and zinc (Zn) accumulation; and metallothionein (MT) levels in normal and deformed Mediterranean killifish, Aphanius fasciatus (Pisces, Cyprinodontidae), collected from unpolluted (S1) and polluted areas (S2) in the Gulf of Gabes in Tunisia. Metal determination in water and sediment showed that the concentrations were significantly higher (p?Histopathological investigations revealed greater changes in gills, kidney, liver, and bone tissues of fish from the polluted area than those recorded in fish from the reference area. In comparison to normal fish of the polluted area (S2), tissue alterations were more developed in deformed specimens of this site. A possible relationship between metallic pollution, incidence of spinal deformities, and histological changes in A. fasciatus in the polluted site was discussed.     

Numerical Simulation of Gas Injection in Vertical Water Saturated Porous Media

We present numerical simulations of drainage induced by air injection in a vertical water-saturated Hele-Shaw cell filled with glass microbeads. We use the macroscale Subsurface Transport Over Multiple Phases (STOMP) simulator developed by the Pacific Northwest National Laboratory’s Hydrology Group. To trigger fingering, we use random permeability fields consistent to capillary entry pressure fields. We compare the numerical results to our own experimental results shown in a previous study. We analyze the effects of the microheterogeneity degree as well as the macroscopic parameters on the gas saturation results. The main objective of the work is to investigate how microscopic effects could be accounted for by macroscopic variables during drainage.     

Cultivation of freshwater microalgae in biodiesel wash water

Biodiesel wash water is a contaminating industrial effluent that must be treated prior to disposal. The use of this effluent as a low-cost alternative cultivation medium for microalgae could represent a viable supplementary treatment. We cultivated 11 microalgae species with potential use for biodiesel production to assess their growth capacities in biodiesel industrial washing waters. Only Monoraphidium contortum, Ankistrodesmus sp., Chlorococcum sp., and one unidentified Chlorophyceae species grew effectively in that effluent. M. contortum showed the highest growth capacity and had the second highest fatty acid content (267.9 mg g⁻¹ of DW), predominantly producing palmitic (20.9%), 7,10,13-hexadecatrienoic (14%), oleic (16.2%), linoleic (10.5%), and linolenic acids (23.2%). In the second phase of the experiment, the microalgae were cultivated in biodiesel wash water at 75% of its initial concentration as well as in WC (control) medium. After 21 days of cultivation, 25.8 and 7.2% of the effluent nitrate and phosphate were removed, respectively, and the chemical oxygen demand was diminished by 31.2%. These results suggest the possibility of cultivating biodiesel producing microalgae in industrial wash water effluents.

     

Social contrasts and land use conflicts in the context of sustainable development and management needs: a case study from an estuarine area at northeastern Brazil

This paper discusses the misuses of estuaries in Northeast of Brazil and the social contrasts there found. The several kinds of impacts promoted by capitalist enterprises in one side and by traditional population, who uses estuary areas at another side, are in complete disagreement with the ethic of sustainable development. Our intention is to demonstrate how these aspects occur in the River Paraíba do Norte estuary, in the State of Paraíba. Observing the conditions of infrastructure besides the multiple ways to handle along with the extension of the estuary, we could recognize 59 focus of conflict between the incorrect use and sustainable mode. Most of the uses concern to traditional artisan fishing, slums and recreational marinas, reflecting the great social contrast between rich and poor people settled in area studied. Ecological and social implications of these conflicting uses are discussed and measures to improve the situation are suggested.