Decolorization of Remazol Black-B using a thermotolerant yeast, Kluyveromyces marxianus IMB3

The ability of Kluyveromyces marxianus IMB3 to decolorize Remazol Black-B dye was investigated. The effect of environmental conditions, such as pH and temperature were examined. No noticeable effects on decolorization were observed when pH varied from 3.0-5.5. Maximum colour removal, 98%, was achieved at 37 degrees C. Little or no colour removal was detected when K. marxianus IMB3 was incubated under anaerobic conditions. Further investigation, in which decolorization was monitored under extreme temperatures and low pH (to inhibit growth) and using ten fold dense inoculum, revealed that decolorization was due to biosorption to the yeast cells and not due to a metabolic reaction.     

Biosorption of arsenic in drinking water by submerged plant: Hydrilla verticilata

To evaluate the biosorption efficacy of submerged aquatic plant Hydrilla verticilata for arsenic uptake from drinking water. H. verticillata, a submerged aquatic plant was utilized successfully for arsenic uptake from aqueous solution. Batch studies with various parameters viz. pH, sorbent dose, contact time, initial metal ion concentration, and temperature were carried out. Data were utilized to plot Lagergren graph along with pseudo-second-order graphs for kinetic studies to estimate the removal efficacy and to determine the nature of reaction. Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) have been performed for characterization of metals on biomass. The study showed 96.35 % maximum absorption of arsenic by H. verticilata at initial concentration of 100 ppb with 0.5 g of biomass/100 ml for 5 h contact time at pH?6.0 with 150 rpm agitation rate. Data followed Langmuir isotherm showing sorption to be monolayer on homogeneous surface of biosorbent. The negative values of ΔG° indicated spontaneous nature; whereas ΔH° indicates exothermic nature of system and negative value of ?S° entropy change correspond to a decrease in the degree of freedom to the adsorbed species followed by pseudo-second-order adsorption kinetics. FTIR and SEM results showed apparent changes in functional group regions after metal chelation and the changes in surface morphology of biosorbent. This is a comparatively more effective, economic, easily available, and environmentally safe source for arsenic uptake from solution due to its high biosorption efficacy than other biosorbents already used.     

Carcinogenicity of hexachlorocyclohexane (BHC) in pure inbred swiss mice.

Inbred Swiss mice were treated with technical BHC (1) orally with the diet or by intubation and (2) by skin painting. The total duration of the experiment was 80 weeks. There was no difference in body growth and mortality between the experimental and control groups. Symptoms of intoxication in the form of convulsions and tendency of circling in one direction with drooping ears were observed alongwith corneal opacity 40 weeks after the experiment. Oral BHC treatment resulted in a significant increase in the incidence of liver tumours and tumours of lymphoreticular tissue. Males and females were equally susceptible. Skin painting of mice did not significantly increase the incidence of tumour.     

Plant availability of cadmium in presence of organic acids: an interactive aspect

The present communication reports the effect of various carboxylic and amino acids on the uptake and translocation of root-absorbed Cd by maize (Zea mays). Statistically significant increases in Cd accumulation in various plant tissues with increasing supplementation of organic acids suggested the existence of Cd-organic acid interaction in soil-rhizosphere environment of the plant. The potentiality of phytochelators (organic acids) to form plant available organically bound Cd is discussed.     

The effects of surfactants on adhesion,spreading, and retention of herbicide droplet on the surface of the leaves and seeds

Droplet adhesion, spreading, and retention on leaf and seed surfaces are studied in the presence of surfactants for successful formulation of a herbicide whereby efficient coverage, less wastage, and environment protection are achieved. Cationic, anionic, and nonionic surfactants, e.g., HTAB, SDBS, and tergitol, were added to water and the static contact angle of water droplet was measured on cauliflower, cabbage, spinach leaves, French bean, wheat, and Bengal gram seeds. Droplet adhesion, spreading, and retention were analysed in terms of static contact angle and physical properties of the system. The presence of a small quantity (0.1 wt.%) of tergitol in water increased the adhesion, spreading, and retention of droplet on all leaf and seed surfaces tested. Tergitol, a nonionic surfactant, is likely to be adsorbed more than the ionic surfactants HTAB and SDBS at the water/leaf (or seed)/air interface since plant leaves and seeds are nonionic in nature. The addition of 0.1% wt. of tergitol to a common herbicide, derosal, increases the adhesion, spreading, and retention of derosal on leaf and seed surfaces, consequently, efficient coverage and minimum wastage are attained.     

Application of foraminifers in ecotoxicology: retrospect, perspect and prospect

In view of the extensive use of foraminifers for the pollution monitoring especially their unmatched utility in deciphering the temporal variation in the type and concentration of pollutants at a given location, the literature dealing with the application of foraminifers for pollution studies has been reviewed. The pollution monitoring through foraminifers started with attribution of peculiar foraminiferal features at any location to the circumstantial presence of pollutants at that site. These peculiar features of the foraminifers in polluted areas included, variation in the abundance of total, calcareous and agglutinated foraminifers, species diversity, abnormal tests, etc. The abnormalities of tests included stunted growth, abraded margins, dissolved ornamentations, etc. Initially, much attention was paid to the effects of sewage pollution on the foraminifers but later on all kinds of human induced as well as natural pollutants came under the preview of foraminiferologists working on pollution aspects. The advantage of application of foraminifers, over other chemical and biological techniques, for pollution monitoring lies in their potentiality to decipher temporal variation in type and concentration of pollutants at any site even in the absence of pre-pollution studies, based on the recovery of foraminifers from the sediment core samples. Realizing the potential application of characteristic foraminiferal features from the polluted areas to decipher the variation in introduction and concentration of pollutants at any given location with time, efforts were made to characterize the specific types of foraminiferal features to the specific pollutants. It was at this point that the need of culture studies was widely felt which resulted in numerous lab and field culture studies where foraminifers were subjected to specific pollutants in order to document their response to these pollutants and to develop effective foraminiferal proxies for pollution monitoring through time. Such studies are still going on and it is felt that culture studies need to be supplemented with advanced crystallographic and molecular studies in order to find the mechanism through which foraminifers respond to the pollutants.     

A three-component model of phytoplankton size class for the Atlantic Ocean

A three-component model was developed which calculates the fractional contributions of three phytoplankton size classes (micro-, nano- and picoplankton) to the overall chlorophyll-a concentration in the Atlantic Ocean. The model is an extension of the Sathyendranath et al. (2001) approach, based on the assumption that small cells dominate at low chlorophyll-a concentrations and large cells at high chlorophyll-a concentrations. Diagnostic pigments were used to infer cell size using an established technique adapted to account for small picoeukaroytes in ultra-oligotrophic environments. Atlantic Meridional Transect (AMT) pigment data taken between 1997 and 2004 were split into two datasets; 1935 measurements were used to parameterise the model, and a further 241 surface measurements, spatially and temporally matched to chlorophyll-a derived from SeaWiFS satellite data, were set aside to validate the model. Comparison with an independent global pigment dataset (256 measurements) also supports the broader-scale application of the model. The effect of optical depth on the model parameters was also investigated and explicitly incorporated into the model. It is envisaged that future applications would include validating multi-plankton biogeochemical models and improving primary-production estimates by accounting for community composition.