Assessment of heavy metal enrichment in the offshore fine-grained sediments of the Caspian Sea

Sampling of the offshore seabed sediments of southwestern part of the Caspian Sea was carried out by gravity corer in order to study heavy metal concentration and the physicochemical factors controlling their distribution in the fine-grained fraction. The grain size distribution, amount, and type of clay minerals, total organic carbon (TOC) content, and Eh–pH of the sediments were determined. The average concentrations of the heavy metals in ppm are Mn (563), Cu (207.5), Sr (187), Zn (94), Pb (26.3), Ni (14.5), Co (11.5), Cd (2.56), and Ag (1.04) in their order of abundances. Co and Zn mostly indicate increase in silt-size fraction of the sediments suggesting their probable detrital provenance but the Mn, Ni, Cu, Sr, Pb, Cd, and Ag concentrations show a similar trend to distribution of the clay-size fraction. The concentrations of Mn, Co, and Cd increase with increase in the TOC content but the Cu, Pb, Ni, Ag, and Sr concentrations decrease with increase of the TOC content. The amounts of Zn, Cu, Sr, Pb, Cd, and Ag increase with increase in the CaCO₃ content. The calculated enrichment factor indicates that the sediments are very strong to extremely enriched in Ag, significantly enriched in Cu and Cd, and depleted to mineral for Pb, Sr, Co, Ni, and Zn. Variations of the Cu, Sr, Cd, Ag, and Pb concentrations are similar to the clay and CaCO₃ distributions.     

Daily dietary intakes of zinc,copper, lead,and cadmium as determined by duplicate portion sampling combined with either instrumental analysis or the use of food composition tables,Shiraz, Iran

Estimation of essential and toxic element intakes is crucial to evaluate the risks of deficiency or toxicity. The purpose of this study was to investigate and also to compare the dietary intakes of zinc (Zn) and copper (Cu) by adults living in Shiraz, Iran, determined by two procedures: duplicate portion sampling of 21 hospital meals combined with either instrumental analysis (voltammetric measurement) or the use of food composition tables (FCTs). The level of exposure to lead (Pb) and cadmium (Cd) was evaluated as well. The daily Zn intakes of both methods were not significantly different and were higher than the RDA values except the value measured by the instrumental analysis which was lower than the RDA established for a male adult. Daily intake of Cu determined by instrumental analysis was significantly lower and closer to RDA for adults compared with the value estimated by FCTs. The dietary intakes of Pb and Cd were 313 and 61 % of the respective provisional tolerable weekly intakes (PTWIs), respectively. The accuracy of two methods used for estimation of Zn intake was similar. In the case of Cu, the use of FCTs, in which the influence of environmental conditions and dietary habits of meal preparation is not taken into account, overestimated dietary intake. The risk of zinc deficiency was found in adult males. Moreover, the estimated intake of Pb, but not Cd, could be a cause of concern for Shiraz population. Thus, conducting regular periodic studies to assess the dietary intake of mentioned elements are recommended.     

The implementation of data reconciliation for evaluating a full-scale petrochemical wastewater treatment plant

Data reconciliation and mass balance analysis were conducted for the first time to improve the data obtained from a petrochemical wastewater treatment plant (WWTP), and the results were applied to evaluate the performance of the plant. Daily average values for 209 days from the inlet and outlet of the plant obtained from WWTP documentation center along with the results of four sampling runs in this work were used for data reconciliation and performance evaluation of the plant. Results showed that standard deviation and relative errors in the balanced data of each measurement decreased, especially for the process wastewater from 24.5 to 8.6 % for flow and 24.5 to 1.5 % for chemical oxygen demand (COD). The errors of measured data were −137 m³/day (−4.41 %) and 281 kg/day (7.92 %) for flow and COD, respectively. According to the balanced data, the removal rates of COD and 5-day biological oxygen demand (BOD₅) through the aeration unit were equal to 37 and 46 %, respectively. In addition, the COD and BOD₅ concentrations were reduced by about 61.9 % (2137 kg/day) and 78.1 % (1976 kg/day), respectively, prior to the biological process. At the same time, the removal rates of benzene, toluene, and styrene were 56, 38, and 69 %, respectively. The results revealed that about 40 % of influent benzene (75.5 kg/day) is emitted to the ambient air at the overhead of the equalization basin. It can be concluded that the volatilization of organic compounds is the basic mechanism for the removal of volatile organic compounds (VOCs) and it corresponds to the main part of total COD removal from the WWTP.

     

Evaluation of membrane bioreactor for hypersaline oily wastewater treatment

Produced water is a significant waste stream generated in association with oil and gas production. It contains high concentrations of hydrocarbon constituents and different salts. In this study, a membrane sequencing batch reactor (MSBR) was used to treat synthetic and real produced water. The MSBR was evaluated in terms of biodegradation of hydrocarbons in the synthetic produced water with various organic loading rates (OLR) (0.281, 0.563, 1.124, 2.248, and 3.372 kg COD/(m³ day)), cycle time (12, 24, and 48 h), and membrane performance. The effects of salt concentrations at different total dissolved solids (TDS) (35,000, 50,000, 100,000, 150,000, 200,000, and 250,000 mg/L) on biological treatment of the pollutants in the synthetic and real wastewater were studied. At an OLR of 1.124 kg COD/(m³ day), an HRT of 48 h and TDS of 35,000 mg/L, removal efficiencies of 97.5%, 97.2%, and 98.9% of COD, total organic carbon (TOC), and oil and grease (O&G), respectively were achieved. For the real produced water, removal rates of 86.2%, 90.8%, and 90% were obtained for the same conditions. However, with increasing salt content, the COD-removal efficiencies of the synthetic and real produced water were reduced to 90.4% and 17.7%, respectively at the highest TDS.     

Metallic nanoparticles: green synthesis and spectroscopic characterization

Metallic nanoparticles are finding new applications in medical, pharmaceutical, food and agriculture sectors. Applications include drug delivery, targeted cancer remedies, biomarker mapping, gene delivery and molecular imaging. This article reviews green strategies for the preparation of metallic nanoparticles, using enzymes, vitamins, monosaccharides, polysaccharides and biodegradable polymers. Microwave-assisted synthesis is detailed. Then, we review nanoparticle characterization using UV–visible spectroscopy and Fourier transform infrared spectroscopy. We also present applications for water purification.