Adaptive particle swarm optimization–based deep neural network for productivity enhancement of solar still

Environmental Science and Pollution Research - Water is considered one of the most superabundant resources on the earth that covers 75% of the entire earth’s surface, yet numerous countries...     

Effects of zinc on epidermal ultrastructure in the larva of Clupea harengus

In March, 1983 changes in epidermal ultrastructure were examined in Clupea harengus L. larvae hatched from eggs incubated in four zinc concentrations (0.5 2.0, 6.0 and 12.0 ppm). In addition to the outer and inner epidermal cell types described previously, a third type of cell is present. Ultrastructurally this resembles the epidermal chloride cells of Sardinops caerulea Girard, characterised by numerous mitochondria, extensive smooth endoplasmic reticulum and a free surface exposed to the environment. These cells occur on the yolk sac, head and in the regions of the trunk just above the yolk sac. In larvae treated in 12.0 ppm zinc, the cells contain fewer mitochondria with fewer cristae than those in the controls. Smooth endoplasmic reticulum is much reduced forming nodular masses and contains granular osmiophilic inclusions. In larvae hatching from eggs previously incubated in 6.0 and 12.0 ppm zinc, the epidermal cells contain more vesicles, intracellular spaces, and swollen mitochondria and show signs of necrosis. The viability of these larvae is discussed.     

Microtox assay to determine the toxicity of degradation products from degradable plastics

Six types of starch-polyethylene degradable plastics were evaluated for the release of water-soluble toxic compounds under accelerated degradation conditions. A plastic strip (2.5×15.2 cm) was placed in a 250-ml Erlenmeyer flask with 100 ml of ASTM type I water with or without trace element solutions and shaken at 65°C and 110 rpm for 20 weeks in replicates of two. High temperature was used to accelerate the oxidative degradation of polyethylene. Plastic degradation was measured by loss of tensile strength, percentage elongation, strain energy, and weight-average molecular weight. The most rapid period of polyethylene thermal degradation was complete for most materials by day 28. Ten-milliliter aqueous samples were removed from each flask at days 1, 7, 28, 56, 84, and 140 (water volumes were maintained at 100 ml with fresh type I water), filtered through glass filters, then evaluated by using the Microtox Toxicity Analyzer (Microbics Corporation, Carlsbad, CA). No water-soluble toxic compounds were detected during the period of rapid film degradation. Toxicity was observed at day 28 for one film and at day 84 for all films, which could possibly correlate with the release of small oxidative compounds such as formaldehyde and acetaldehyde. Because of the sensitivity of this assay, positive results must be confirmed by otherin vitro studies.Journal Paper No. J-14851 of the Iowa Agriculture and Home Economics Experiment Station, Ames, Iowa. Projects No. 2889 and 0178.     

Establishment the relationship between water quality parameter and micro plastic concentration for Adyar and Cooum estuary

Increasing micro plastic concentration in the marine environment is a severe threat to the marine ecosystem and indirectly to human society depending on the marine environment. Also, the surface and subsurface water quality parameters are the indicators of the usability of the water sources for human activities. The primary source of micro plastic is the water river systems from land to sea. This study establishes a correlation between water quality parameters and micro plastic concentration to find the most suitable quality parameter for finding the micro plastic concentration in urban coastal estuaries of Chennai coast, Tamil Nadu, India. Twenty samples from Adyar and Cooum estuaries were collected, with ten each on August 2019 and August 2020. They are tested for temperature pH, EC, Turbidity, TDS, DO, BOD, COD, Salinity and micro plastic concentrations. Correlation tests such as Pearson's and Spearman's are performed based on the initial Normality and Homogeneity test. The results show that all the parameters are significantly not correlated with the Micro plastic Concentration, and Micro plastic Concentration is considered an independent factor.     

An innovative approach to minimize excess sludge production in sewage treatment using integrated bioreactors

The present investigation deals with an application of integrated sequential oxic and anoxic bioreactor(SOABR) and fluidized immobilized cell carbon oxidation(FICCO) reactor for the treatment of domestic wastewater with minimum sludge generation. The performance of integrated SOABR-FICCO system was evaluated on treating the domestic wastewater at hydraulic retention time(HRT) of 3 hr and 6 hr for 120 days at organic loading rate(OLR)of 191 ± 31 mg/(L·hr). The influent wastewater was characterized by chemical oxygen demand(COD) 573 ± 93 mg/L; biochemical oxygen demand(BOD5) 197 ± 35 mg/L and total suspended solids(TSS) 450 ± 136 mg/L. The integrated SOABR-FICCO reactors have established a significant removal of COD by 94% ± 1%, BOD5 by 95% ± 0.6% and TSS by 95% ± 4% with treated domestic wastewater characteristics COD 33 ± 5 mg/L; BOD59 ± 0.8 mg/L and TSS 17 ± 9 mg/L under continuous mode of operation for 120 days. The mass of dry sludge generated from SOABR-FICCO system was 22.9 g/m~3. The sludge volume index of sludge formed in the SOABR reactor was 32 mL/g and in FICCO reactor it was 46 mL/g. The sludge formed in SOABR and FICCO reactor was characterized by TGA, DSC and SEM analysis. Overall, the results demonstrated that the integrated SOABR-FICCO reactors substantially removed the pollution parameters from domestic wastewater with minimum sludge production.     

A study of polonium-210 distribution aspects in the riverine ecosystem of Kaveri, Tiruchirappalli, India

Distribution of a natural radionuclide (210Po) in water, sediment and biota was quantified along a 95 km reach of the Kaveri River, India. It is observed that the soft tissues of animals concentrated a higher level of 210Po than the hard parts like shell and bone. The ranges of 210Po activity in biological samples were 2.32-10.78 Bq kg(-1) wet (aquatic weeds), 18.94-28.55 Bq kg(-1) wet (plankton), 32.51 to 46.17 Bq kg(-1) wet (snail), 57.42 to 105.78 Bq kg(-1) wet (bivalve), 12.13 to 19.10 Bq kg(-1) wet (prawn) and 1.86 to 4.17 Bq kg(-1) wet (fish). The concentration factors (CFs) for the aquatic organisms ranged from 10(3) to 10(4), indicating a high affinity of 210Po for organic moieties. The bivalve mollusc, Lamellidens marginalis, accumulated higher concentrations of 210Po, suggesting that it could serve as a biomonitor of 210Po radionuclide in riverine systems. Further, the levels of 210Po in water, sediment and biological samples from impoundments were higher than those from stations located in the open river. This may be largely due to aerial inputs of the radionuclide, accumulation of radionucliderich silt and organic matter, and increased biological production in the impounded water body.     

Investigation effect of hydrogen addition on the performance and exhaust emissions of Pongamia pinnata biodiesel fueled compression ignition engine

In the recent decades, the energy demand for transport and industrial sector has increased considerably. Fossil fuels which were the major fuel source for decades are no more sustainable. Biodiesel is an efficient alternative compared to depleting fossil fuels. The prospect of biodiesel as the best alternative fuel is a reliable source compared to depleting fossil fuels. Hydrogen is also considered as an attractive alternative fuel producing low emission with improved engine performance. This paper investigates the performance and emission characteristics of a single cylinder compression ignition engine using hydrogen as an inducted fuel and biodiesel, aka Pongamia pinnata as injected fuel. The experiments are conducted for different quantities of hydrogen induction through the intake manifold in order to improve the performance of the engine. The performance parameters such as brake thermal efficiency, brake specific fuel consumption, exhaust temperature and emission quantities like HC, NO_X, CO, CO₂ of biodiesel fueled CI engine with variable mass flow rate of hydrogen are investigated. The performances of biodiesel combined with hydrogen at varying mass flow rates are also compared. The 10 LPM hydrogen induction with biodiesel provided 0.33% increase of brake thermal efficiency compared with diesel and increase of 3.24% to biodiesel at 80% loading conditions. The emission of HC decreased by 13 ppm, CO decreased by 0.02% by volume and CO₂ decreased by 3.8% by volume for biodiesel with induction of hydrogen at 10 LPM to that of neat biodiesel for 80% load conditions.     

Correlation study of hazardous waste characteristics among various chemical processes in Republic of Korea

To harmonize with international standards, the Republic of Korea is in the process of converting its current hazardous waste classification system and setting up regulatory standards for all toxic substances present in hazardous waste. Detailed characterization of each form of hazardous waste belonging to five chemical processes and their correlations were studied. In the present work, the concentrations of 13 heavy metals, F^?, CN^?, 7 PAH compounds, total PCDD/F and 7 PCB isomers present in the hazardous waste generated among chemical processes such as synthetic rubber (SR), man-made fibers (MF), organic dyes and pigments (DP), pharmaceuticals and cosmetics were analyzed along with their leaching characteristics. Comparing all the processes, most of the heavy metal concentrations were high in SR waste. Naphthalene was the dominant PAH in most of the chemical process waste. PCDD/F concentrations of the samples were in the range of 0.001–0.003 ng I-TEQ/g. PCB isomer-101 and isomer-118 were found to be slightly higher than the permissible limit in the SR filter cake sample. SR process wastes doesn’t show any resemblance with the other process waste in either the heavy metals and PAH trend. Each sample from DP and MF were suitable only for hazardous waste landfill.