Arsenic in shallow aquifer in the eastern region of Bangladesh: insights from principal component analysis of groundwater compositions

Probable sources and mechanisms of arsenic (As) release in shallow aquifer in eastern Bangladesh are evaluated using statistical analysis of groundwater compositions. Dissolved As in 39 samples ranged from 8.05 to 341.5 μg/L with an average of 95.14 μg/L. Ninety seven percent of wells exceed the WHO limit (10 μg/L) for safe drinking water. Principal component analysis is applied to reduce 16 measured compositional variables to five significant components (principal components—PCs) that explain 86.63% of the geochemical variance. Two component loadings, namely PC 1 and PC 2 (45.31% and 23.05%) indicate the natural processes within the aquifers in which organic matter is a key reactant in the weathering reactions. Four groups of wells are defined by the PCA and each group of wells represents distinct physicochemical characteristics. Among them, group III groundwater shows higher As concentration together with high concentrations of Fe, Mn, dissolved organic carbon, $\text{PO}_{4}^{3-}$ and $\text{HCO}_{3}^{-}$ than groups I and II. Speciation calculations suggest that only wells of group III are saturated with respect to siderite, and all groups of samples are supersaturated with respect of rhodochrosite. The relationship of As with these parameters in the different groups of wells of the study area suggests that reductive dissolution of Fe–Mn oxyhydroxides with microbially mediated degradation of organic matter is considered to be the dominant processes to release As in groundwater.     

Mammalian toxicity of Technical X-factor I. An acute oral study

Intragastric administration of acute doses of Technical X-factor (beta-isomer free BHC, a byproduct obtained during separation of Lindane from Tech. BHC) carried in peanut oil elicited typical signs of central nervous system depression in adult rats. The computed oral LD50 values of X-factor were 4174 and 5673 mg/kg. body weight for male and female rats respectively indicating that its acute toxicity was of relatively low order compared to Tech. BHC. It is suggested that the low acute mammalian toxicity of X-factor could possibly be due to a direct antagonism of the delta isomer (present in larger proportion in X-factor) with the gamma isomer.     

Biosynthesis of Poly(3-hydroxybutyrate) from Cheese Whey by <Emphasis Type="Italic">Bacillus megaterium</Emphasis> NCIM 5472

Microbial polyhydroxyalkonate such as homopolyester of poly(3-hydroxybutyrate) (PHB) was produced from cheese whey by Bacillus megaterium NCIM 5472. Due to their numerous potential industrial applications, the focus was given to competently enhance the amount of PHB produced. The amount of PHB produced from whole cheese whey, and ultrafiltered cheese whey was first compared, and after observing a rise in PHB production by using ultrafiltered cheese whey, cheese whey permeate was chosen for further analysis. The presence of PHB was then confirmed by GCMS. Since the main aim of the study was to increase the amount of PHB produced through batch fermentation, various process parameters like time, pH, C/N ratio, etc. were optimized. After optimization, it was found that B. megaterium NCIM 5472 was capable of accumulating 75.5% of PHB of its dry weight and a PHB yield of 8.29 g/L. The chemical structure of the polymer was further analyzed by using FTIR and NMR spectroscopy methods. Also, the physical and thermal properties were studied by using Differential scanning calorimetry and Thermogravimetric analysis. It was found that the polymer produced had excellent thermal stability, thus allowing the possibility to exploit its properties for industrial purposes such as adhesives, packaging materials, etc.     

Metal-oxide coated Graphene oxide nano-composite for the treatment of pharmaceutical compound in photocatalytic reactor: Batch,Kinetics and Mathematical Modeling using Response Surface Methodology and Artificial Neural Network

Environmental Science and Pollution Research - Titanium dioxide (TiO2) photocatalyst has gained constant interest in the treatment of wastewater because of its greater stability, lower cost,...     

Efficacy of indigenous soil microbes in arsenic mitigation from contaminated alluvial soil of India

Selected arsenic-volatilizing indigenous soil bacteria were isolated and their ability to form volatile arsenicals from toxic inorganic arsenic was assessed. Approximately 37 % of AsIII (under aerobic conditions) and 30 % AsV (under anaerobic conditions) were volatilized by new bacterial isolates in 3 days. In contrast to genetically modified organism, indigenous soil bacteria was capable of removing 16 % of arsenic from contaminated soil during 60 days incubation period while applied with a low-cost organic nutrient supplement (farm yard manure).     

Isomerization of beta-HCH in aqueous solution

beta-HCH was shaken with distilled water at 25 +/- 1 degree C for different time intervals and filtered. The ether extract of the filtrate on analysis by gas liquid chromatography showed the presence of four isomers, alpha, beta, gamma and delta, besides other compounds, thereby indicating isomerization of the beta-isomer in aqueous solution. Further, the ether extract, when dried and dissolved in acetone, showed high toxicity to mosquito larvae, flour beetle larvae and house-flies thereby indicating conversion of the inert beta-isomer to more toxic forms corroborating GLC analysis. Acetone solution of pure beta-HCH was found nontoxic against the insects tested.     

Eco-friendly PEG-based controlled release nano-formulations of Mancozeb: Synthesis and bioefficacy evaluation against phytopathogenic fungi Alternaria solani and Sclerotium rolfsii

Controlled release (CR) nano-formulations of Mancozeb (manganese-zinc double salt of N,N-bisdithiocarbamic acid), a protective fungicide, have been prepared using laboratory-synthesized poly(ethylene glycols) (PEGs)-based functionalized amphiphilic copolymers without using any surfactants or external additives. The release kinetics of the developed Mancozeb CR formulations were studied and compared with that of commercially available 42% suspension concentrate and 75% wettable powder. Maximum amount of Mancozeb was released on 42nd day for PEG-600 and octyl chain, PEG-1000 and octyl chain, and PEG-600 and hexadecyl chain, on 35th day for PEG-1000 and hexadecyl chain, on 28th day for PEG-1500 and octyl chain, PEG-2000 and octyl chain, PEG-1500 and hexadecyl chain, and PEG-2000 and hexadecyl chain in comparison to both commercial formulations (15th day). The diffusion exponent (n value) of Mancozeb in water ranged from 0.42 to 0.62 in tested formulations. The half-release (t_1/2) values ranged from 17.35 to 35.14 days, and the period of optimum availability of Mancozeb ranged from 18.54 to 35.42 days. Further, the in vitro bioefficacy evaluation of developed formulations was done against plant pathogenic fungi Alternaria solani and Sclerotium rolfsii by poison food technique. Effective dose for 50% inhibition in mgL^?1 (ED₅₀) values of developed formulations varied from 1.31 to 2.79 mg L^?1 for A. solani, and 1.60 to 3.14 mg L^?1 for S. rolfsii. The present methodology is simple, economical, and eco-friendly for the development of environment-friendly CR formulations of Mancozeb. These formulations can be used to optimize the release of Mancozeb to achieve disease control for the desired period depending upon the matrix of the polymer used. Importantly, the maximum amount of active ingredient remains available for a reasonable period after application. In addition, the developed CR formulations were found to be suitable for fungicidal applications, allowing use of Mancozeb in lower doses.     

Plant canopies: bio-monitor and trap for re-suspended dust particulates contaminated with heavy metals

Urban and peri-urban vegetation is being considered for air pollution abatement. Appropriate plants with efficiency to adsorb and absorb air-pollutants are the prerequisite for green space development. The contributions of surface morphology towards plant’s ability to function as dust particulate adsorber and distribution of trace elements over the leaves are investigated in the present study. Dust interception efficiency was estimated for two roadside plant species named Ficus benghalensis, and Polyalthia longifolia. Leaves of both the plants are capable of capturing dust in the range of 0.12 mg/cm² to 1.89 mg/cm² on either of the leaf surfaces. However, variation in dust capturing capacity between the plants was observed. Leaf surface characters such as roughness, length, frequency of trichomes and frequency of stomata played a significant role in capturing re-suspended dust. Frequency (2 to 4 per 0.0004 cm²) and length (152.5 to 92.1 cm) of trichome showed negative co-relation trend, where as frequency and size of stomata showed positive co-relation trend. Elemental analysis by Scanning Electron Microscope attached with Energy Dispersive X-Ray Spectrometer (SEMEDS) indicated the presence of elements such as Sodium (Na), Magnesium (Mg), Aluminium (Al), Silicon (Si), Chlorine (Cl), Pottasium (K), Calcium (Ca), Iron (Fe), Zinc (Zn) and Arsenic (As). The results support the fact that plant canopies can be used for mitigation and bio-monitoring of air pollution as well.