Evaluation of groundwater and soil pollution in a landfill area using electrical resistivity imaging survey

Landfills are sources of groundwater and soil pollution due to the production of leachate and its migration through refuse. This study was conducted in order to determine the extent of groundwater and soil pollution within and around the landfill of Seri Petaling located in the State of Selangor, Malaysia. The condition of nearby surface water was also determined. An electrical resistivity imaging survey was used to investigate the leachate production within the landfill. Groundwater geochemistry was carried out and chemical analysis of water samples was conducted upstream and downstream of the landfill. Surface water was also analyzed in order to determine its quality. Soil chemical analysis was performed on soil samples taken from different locations within and around the landfill in the vadose zone (unsaturated zone) and below the water table (in the soil saturated zone). The resistivity image along line L–L₁ indicated the presence of large zones of decomposed waste bodies saturated with highly conducting leachate. Analysis of trace elements indicated their presence in very low concentrations and did not reflect any sign of heavy metal pollution of ground and surface water or of soil. Major ions represented by Na, K, and Cl were found in anomalous concentrations in the groundwater of the downstream bore hole, where they are 99.1%, 99.2%, and 99.4%, respectively, higher compared to the upstream bore hole. Electrical conductivity (EC) was also found in anomalous concentration downstream. Ca and Mg ions represent the water hardness (which is comparatively high downstream). There is a general trend of pollution towards the downstream area. Sulfates (SO₄) and nitrates (NO₃) are found in the area in low concentrations, even below the WHO standards for drinking water, but are significantly higher in the surface water compared to the groundwater. Phosphate (PO₄) and nitrite (NO₂), although present in low levels, are significantly higher at the downstream. There is no significant difference in the amount of fluoride (F) in the different locations. In the soil vadose zone, heavy metals were found to be in their typical normal ranges and within the background concentrations. Soil exchangeable bases were significantly higher in the soil saturated zone compared to the vadose zone, and no significant difference was obtained in the levels of inorganic pollutants. With the exception of Cd, the concentration ranges of all trace elements (Cu, Zn, Cr, Pb, and Ni) of Seri Petaling landfill soils were below the upper limits of baseline concentrations published from different sources.     

Management of urban solid waste: Vermicomposting a sustainable option

Solid waste management is a worldwide problem and it is becoming more and more complicated day by day due to rise in population, industrialization as well as changes in our life style. Presently most of the waste generated is either disposed of in an open dump in developing countries or in landfills in the developed ones. Landfilling as well as open dumping requires lot of land mass and could also result in several environmental problems. Land application of urban/municipal solid waste (MSW) can be carried out as it is rich in organic matter and contains significant amount of recyclable plant nutrients. The presence of heavy metals and different toxics substances restricts its land use without processing. Vermicomposting of MSW, prior to land application may be a sustainable waste management option, as the vermicast obtained at the end of vermicomposting process is rich in plant nutrients and is devoid of pathogenic organism. Utilization of vermicast produced from urban/municipal solid waste in agriculture will facilitate in growth of countries economy by lowering the consumption of inorganic fertilizer and avoiding land degradation problem. Vermicomposting of urban/MSW can be an excellent practice, as it will be helpful in recycling valuable plant nutrients. This review deals with various aspects of vermicomposting of MSW.     

The use of date palm as a potential adsorbent for wastewater treatment: a review

Background

In tropical countries, the palm tree is one of the most abundant and important trees. Date palm is a principal fruit grown in many regions of the world. It is abundant, locally available and effective material that could be used as an adsorbent for the removal of different pollutants from aqueous solution.

Review

This article presents a review on the role of date palm as adsorbents in the removal of unwanted materials such as acid and basic dyes, heavy metals, and phenolic compounds. Many studies on adsorption properties of various low cost adsorbent, such as agricultural waste and activated carbons based on agricultural waste have been reported in recent years.

Conclusion

Studies have shown that date palm-based adsorbents are the most promising adsorbents for removing unwanted materials. No previous review is available where researchers can get an overview of the adsorption capacities of date palm-based adsorbent used for the adsorption of different pollutants. This review provides the recent literature demonstrating the usefulness of date palm biomass-based adsorbents in the adsorption of various pollutants.     

Combustion characteristics of Malaysian municipal solid waste and predictions of air flow in a rotary kiln incinerator

Malaysia is in dire need of alternatives to landfilling for solid waste management. Recently, landfills have faced the problems of overfilling, overflowing of leachates leading to pollution of water resources, and uncontrolled dust emissions adversely affecting the local environment. With the rising cost of urbanization coupled with the high rate of waste generation, one possible method of waste treatment that is receiving particular attention by the government is incineration. Incineration of solid waste is rather new in Malaysia, with limited usage in handling small sources of waste generation such as the municipal solid waste (MSW) of resort islands; however, its potential in ameliorating the problems associated with solid waste treatment may make it an attractive alternative to landfill. This article presents the results of test runs conducted to investigate the performance of a locally designed and manufactured rotary kiln incinerator (RKI). The test runs were conducted using MSW collected from the Shah Alam municipality. The combustion efficiency was analyzed by looking at the temperature profiles and chemical species concentrations. To complement the combustion characteristics measurements, predictions of the air flow in the incinerator during the process were also investigated. The overall performance of the RKI suggests that it is suitable for treating MSW.     

Using biomass residues from oil palm industry as a raw material for pulp and paper industry: potential benefits and threat to the environment

Oil palm industries produce an enormous quantity of lignocellulosic biomass; in the form of large leaves of palm tree, pruned fronds (OPF) and oil palm trunks (OPT) at the plantations site. Besides this, the processing of fresh fruit bunches in the oil mills generates empty fruit bunches (EFB), shells, kernel cake and mesocarp fibers. The proper management of this burgeoning waste and its disposal is an ardent task and creates environmental hazards. In order to deal with the biomass residues, the urgent need is that it should be transformed into resources with industrial utility. As the economic development has resulted in the significant increased demand for paper, the industry is looking for eccentric sources to fulfill the requirement. The pulp and paper industry preferred use of coniferous and deciduous trees for papermaking because their cellulose fibers in the pulp make durable paper. With improvements in pulp processing technology, fibers of almost any non-wood of plants species like bamboo, cereal straw, sugarcane, flax, hemp and jute can be used for paper pulp. Substituting this lignocellulosic material can reduce the burden on forest while supporting the natural biodiversity. The present review deals with the possibilities of using oil palm biomass as a raw material for pulp and papermaking, as this would ameliorate its waste management problem. The potential of oil palm biomass and the challenges regarding its use in papermaking are discussed. The use of oil palm biomass will apparently prove that the oil palm industry is ecofriendly in every aspect of its activities and aid in sustainability of forest ecosystem.     

A comparative study of the toxicity of lead and its impact on the carbohydrate metabolism and some haematological parameters of cichlid fish,oreochromis niloticus and catfish,clarius gariepinus from saudi arabia

Fresh and healthy specimens of Oreochromis niloticus (mean weight 70.5± 1.23 g and mean length, 12.3± 1.5cm) and Clarias gariepinus (mean weight, 41.8±2.3 g and mean length 13.78 ± 1.2 cm) were exposed to heavy metal lead, ranging in concentration from 10 to 18 mg L^‐1 for O. niloticus and 20 to 28 mg L^‐1 for C. gariepinus respectively. The 96 h LC₅₀ for both the species was computed as 12.45 mg L^‐1 (O. niloticus) and 22.65 mg L^‐1 (C. gariepinus). The cichlid fish was exposed to sublethal concentration of lead (2, 4 and 6 mgL^‐1) and catfish (4, 8 and 12 mgL^‐1). The erythrocytes count, haemoglobin concentration, haematocrit and the value of serum glucose increased significantly (P < 0.01), whereas leucocytes count, serum protein and serum triglyceride after intoxication declined in both the species with the same pattern but in different quantity. After 96 h of time a significant depletion of muscle and liver glycogen was noted, being greater in muscle (16.7% in O. niloticus) and in liver (15.9% in C. gariepinus). The response of fish to lead was dose dependent.     

Microalgae cultivation for phenolic compounds removal

Microalgae are promising sustainable and renewable sources of oils that can be used for biodiesel production. In addition, they contain important compounds, such as proteins and pigments, which have large applications in the food and pharmaceutical industries. Combining the production of these valuable products with wastewater treatment renders the cultivation of microalgae very attractive and economically feasible. This review paper presents and discusses the current applications of microalgae cultivation for wastewater treatment, particularly for the removal of phenolic compounds. The effects of cultivation conditions on the rate of contaminants removal and biomass productivity, as well as the chemical composition of microalgae cells are also discussed.