Recycling of petroleum-contaminated sand

The environmental impact of using petroleum-contaminated sand (PCS) as a substitute in asphalt paving mixtures was examined. An appreciable component of PCS is oily sludge, which is found as the dregs in oil storage tanks and is also produced as a result of oil spills on clean sand. The current method for the disposal of oily sludge is land farming. However, this method has not been successful as an oil content of < 1% w/w is required, and difficulty was encountered in reaching this target. The reuse of the sludge in asphalt paving mixtures was therefore considered as an alternative. Standard tests and environmental studies were conducted to establish the integrity of the materials containing the recycled sludge. These included physical and chemical characterization of the sludge itself, and an assessment of the mechanical properties of materials containing 0%, 5%, 22% and 50% oily sludge. The blended mixtures were subjected to special tests, such as Marshall testing and the determination of stability and flow properties. The experimental results indicated that mixtures containing up to 22% oily sludge could meet the necessary criteria for a specific asphalt concrete wearing course or bituminous base course. To maximize the assay from the recycled material, the environmental assessment was restricted to the 50% oily sludge mixture. Leachates associated with this particular mixture were assayed for total organic residue and certain hazardous metal contaminants. The results revealed that the organics were negligible, and the concentrations of the metals were not significant. Thus, no adverse environmental impact should be anticipated from the use of the recycled product. Our research showed that the disposal of oily sludge in asphalt paving mixtures could possibly yield considerable savings per tonne of asphalt concrete, and concurrently minimize any direct impact on the environment.     

Bioavailability and toxicological potential of sunflower-bound residues of 14C-chlorpyrifos insecticide in rats

Sunflower plants were treated with ¹⁴C-chlorpyrifos under conditions simulating local agricultural practice. Residues present in the oil, methanol extract and cake of the treated sunflower seeds were 7.2, 2.8, and 12 ppm, respectively. When rats fed on sunflower cake containing bound residues for three days, the animals eliminated 46 % of the radioactivity in urine, 25 % in feces and 10 % in the expired air. A further bioavailable amount of 8 % was found in selected organs indicating that the bound residues were highly bioavailable. Chromatographic analysis of urine extract revealed the presence of the parent compound, its oxon, desethyl chlorpyrifos and desethyl chlorpyrifos oxon as free metabolites in addition to a conjugated metabolite. It was liberated by acid hydrolysis and identified as 3,5,6-trichloro-2-hydroxypyridine. Bound residues were found to have biological effects such as inhibition of rat plasma ChE, elevations of liver parameters (ALT, AST, and ALP), decrease in total protein and albumin content suggesting a hepatotoxic potential. A significant increase in the values of creatinine, urea, cholesterol, triglycerides and significant decrease in Catalase and Glutathion-S-Transfrase were observed in treated rats.     

Performance of a small-scale solar-powered adsorption cooling system

In this study, an experimental investigation on the performance of a small-scale residential-size solar-driven adsorption (silica gel-water) cooling system that was constructed at Assiut University campus, Egypt is carried out. As Assiut area is considered as hot, arid climate, field tests for performance assessment of the system operation during the summer season are performed under different environmental operating conditions. The system consists of an evacuated tube with a reflective concentration parabolic surface solar-collector field with a total area of 36 m², a silica gel-water adsorption chiller of 8 kW nominal cooling capacity, and hot and cold water thermal storage tanks of 1.8 and 1.2 m³ in volume, respectively. The results of summer season field test show that under daily solar insolation varying from 21 to 27 MJ/m², the solar collectors employed in the system had high and almost constant thermal efficiency. The daily solar-collector efficiency during the period of system operation ranged from about 50% to 78%. The adsorption chiller performance shows that the chiller average daily coefficient of performance (COP) was 0.41 with the average cooling capacity of 4.4 kW when the cooling-water and chilled-water temperatures were about 31°C and 19°C, respectively. As the chiller cooling water is cooled by the cooling tower in the hot arid area, the cooling water is at a higher temperature than the design point of the chiller. Therefore, an experiment was carried out using the city water for cooling. The results show that an enhancement in the chiller COP by 40% and the chilling power by 17% has been achieved when the city water was 27.7°C.     

Classification of in-flight catering wastes in Egypt air flights and its potential as energy source (chemical approach)

Waste to energy conversion is based on the classification of waste. In-flight catering wastes resulting from Egypt Airlines economy class passengers were classified. The solid waste stream generated contains plastic, paper, left-over waste food and aluminum. The type of meal served varies according to the period of flight and so the quantity and content of the waste stream. It was found that the waste generation rate varied from 61.3 to 265 g according to the meal type. Breakfast snack meal generates the highest weight of waste which recorded an average of 265 g. Plastic waste generated varied from 39.6% to 64.6% by weight for the various types of meals served. A total amount of 725 tons were generated annually from organic waste (paper, plastic and food waste) among which a non combustible 39.4 tons of aluminum. The calorific value for each generated item is calculated and the total energy potential reached up to 14.3 TJ annually.     

Safety analysis approach based on thermodynamic and chemical reactions modelling

Safety analysis of nuclear and chemical/petrochemical facilities is the systematic process that is carried out throughout the design process to ensure that all the relevant safety requirements are met by the proposed design of the plant. Safety analysis should incorporate both deterministic and probabilistic approaches. These approaches have been shown to complement each other and both should be used in the decision making process on the safety and ability of the plant to be licensed.This paper deals with the deterministic safety approach in order to distill the experience of nuclear and chemical/petrochemical protection engineering through a safety analysis approach aiming at analysis of chemically reacting processes including thermodynamic and chemical reactions modelling that are present in both industries. For instance, there are some similarities between the Bhopal disaster and Three Mile Island-Fukushima-like H₂ deflagration-detonation scenarios in nuclear containments. The phenomenology is similar in that the temperature and the pressure caused by exothermic reactions had increased dramatically leading to a loss of containment.The study aims to translate and adapt to general chemically reacting modelling, major features of the equivalent analysis inside the nuclear containments. Compartment containment for H₂ deflagrations has been translated and adapted, with fixed tools, to the methyl-isocyanate storage tank 610 of the Bhopal plant.     

Ginkgo biloba mitigates silver nanoparticles-induced hepatotoxicity in Wistar rats via improvement of mitochondrial biogenesis and antioxidant status

Environmental Science and Pollution Research - Silver nanoparticles (AgNPs) are noble metal nanoparticles, due to their good physicochemical properties, which have been exploited in biological...     

Bioavailability and toxicological potential of sunflower-bound residues of (14)C-chlorpyrifos insecticide in rats

Sunflower plants were treated with (14)C-chlorpyrifos under conditions simulating local agricultural practice. Residues present in the oil, methanol extract and cake of the treated sunflower seeds were 7.2, 2.8, and 12 ppm, respectively. When rats fed on sunflower cake containing bound residues for three days, the animals eliminated 46 % of the radioactivity in urine, 25 % in feces and 10 % in the expired air. A further bioavailable amount of 8 % was found in selected organs indicating that the bound residues were highly bioavailable. Chromatographic analysis of urine extract revealed the presence of the parent compound, its oxon, desethyl chlorpyrifos and desethyl chlorpyrifos oxon as free metabolites in addition to a conjugated metabolite. It was liberated by acid hydrolysis and identified as 3,5,6-trichloro-2-hydroxypyridine. Bound residues were found to have biological effects such as inhibition of rat plasma ChE, elevations of liver parameters (ALT, AST, and ALP), decrease in total protein and albumin content suggesting a hepatotoxic potential. A significant increase in the values of creatinine, urea, cholesterol, triglycerides and significant decrease in Catalase and Glutathion-S-Transfrase were observed in treated rats.     

Geotechnical Engineering Properties of Incinerator Ash Mixes

Abstract

The incineration of solid waste produces large quantities of bottom and fly ash. Landfilling has been the primary mode of disposal of these waste materials. Shortage in landfill space and the high cost of treatment have, however, prompted the search for alternative uses of these waste materials. This study presents an experimental program that was conducted to determine the engineering properties of incinerator ash mixes for use as construction materials. Incinerator ash mixes were tested as received and around optimum compacted conditions. Compaction curves, shear strength, and permeability values of fly ash, bottom ash, and their various blends were investigated. Bottom ash tends to achieve maximum dry density at much lower water content than does fly ash. The mixes displayed a change in their cohesion and friction angle values when one of the two mix components was altered or as a result of the addition of water. The permeability of bottom ash is quite comparable to that of sand. The permeability of fly ash lies in the range of those values obtained for silts and clays. A 100% bottom ash compacted at the optimum water content has a lower density value and yields a higher friction angle and cohesion values than most construction fills. This would encourage the use of bottom ash as a fill or embankment material because free drainage of water will prevent the buildup of pore water pressures.     

Exploratory study of suspended sediment concentrations downstream of harvested peat bogs

Peat bog harvesting is an important industry in many countries, including Canada. To harvest peat, bogs are drained and drainage water is evacuated towards neighboring rivers, estuaries or coastal waters. High suspended sediment concentrations (SSC) were found in the drainage water at one particular site during the 2001–2002 spring seasons in New Brunswick (Canada). The main objective of this study was to verify this observation at other sites, compare SSC levels leaving harvested peat bogs with those leaving an unharvested bog, and to determine if high SSC events happen only in Spring or all year round. Suspended sediment concentrations were monitored downstream of three harvested peat bogs and an unharvested reference bog located in New Brunswick during the ice free seasons of 2003–2004. On average, SSC at the harvested sites exceeded 25 mg/l, which is the recommended daily maximum concentration, 72% of the time, while the same concentration was exceeded 30% of the time at the unharvested sites. SSC were found to be significantly higher at harvested sites than at the reference sites for all seasons. The highest SSC medians were recorded in the Fall but SSC was elevated in all seasons. High SSC levels in receiving waters may be caused by field ditching activities and insufficient sediment controls. Findings suggest the NB Peat Harvesting 25 mg/l SSC guideline should be reviewed.