Recycling in a megacity

In the aftermath of the 9/11 disaster, Mayor Bloomberg of New York City unveiled an aggressive budget plan that included the temporary suspension of glass and plastics recycling. This was considered by many to be anti-environmental, but the results of this study show that for lack of markets, even at zero or negative prices, nearly 90% of the plastic and glass set aside by thoughtful New Yorkers was transported to materials recovery facilities (MRFs) and from there to landfills. Sending bales of plastics to landfills is not limited to New York City. It is an environmental paradox that the United States is digging up new oil fields in pristine areas and, at the same time, continues to convert greenfields to brownfields by burying nearly 20 million tons of plastic fuel annually. The study also determined that at the present rate of source separation, estimated to be less than 30% of the available recyclables in 1999, building large, modern MRFs may increase substantially the rate of New York City recycling and also allow single-stream collection of commingled recyclables, as is done in Phoenix, AZ. Single-stream collection simplifies separation at the source by citizens and increases the amount of collected recyclables. Also, because collection represents a large fraction of the costs of waste management, it may have a significant economic advantage.     

LCA comparison of windrow composting of yard wastes with use as alternative daily cover (ADC)

This study compared the environmental impacts of composting yard wastes in windrows with using them in place of soil as alternative daily cover (ADC) in landfills. The Life Cycle Assessment was made using the SimaPro LCA software and showed that the ADC scenario is more beneficial for the environment than windrow composting. ADC use is also a less costly means of disposal of yard wastes. This finding applies only in cases where there are sanitary landfills in the area that are equipped with gas collection systems and can use yard wastes as alternative daily cover. Otherwise, the environmentally preferable method for disposal of source-separated yard wastes is composting rather than landfilling.     

Waste-to-energy: A review of the status and benefits in USA

The USA has significant experience in the field of municipal solid waste management. The hierarchy of methodologies for dealing with municipal solid wastes consists of recycling and composting, combustion with energy recovery (commonly called waste-to-energy) and landfilling. This paper focuses on waste-to-energy and especially its current status and benefits, with regard to GHG, dioxin and mercury emissions, energy production and land saving, on the basis of experience of operating facilities in USA.     

Relation between mechanochemical dechlorination rate of polyvinyl chloride and mill power consumption

A sample of polyvinyl chloride (PVC) powder was milled with CaO powder in a planetary mill for various mill operational parameters. The milled product consisted of dechlorinated hydrocarbon and water-soluble CaOHCl. The dechlorination rate of PVC was determined by the concentration of Cl⁻ ions measured in solution after dispersing the milled product in water. To evaluate the power consumption during PVC dechlorination, the mill power consumption was measured during each experimental run. In addition, media motion during planetary milling was simulated using the discrete element method (DEM), enabling calculation of the mill power consumption. The power consumption calculated by the DEM simulation compared well with the power consumption measured experimentally. The dechlorination rate correlated well with the specific mill power consumption, regardless of the sample weight. The dechlorination rate of PVC when milled with oyster shells (CaCO₃) was observed to be faster than that of the PVC/CaO system, and oyster shells could be used as a reactant for the treatment of PVC wastes. This work should be useful for the design of a reactor for the dechlorination of PVC. Chemical Feedstock Recycling & Other Innovative Recycling Techniques 6     

Assessment of the state of food waste treatment in the United States and Canada

Currently in the US, over 97% of food waste is estimated to be buried in landfills. There is nonetheless interest in strategies to divert this waste from landfills as evidenced by a number of programs and policies at the local and state levels, including collection programs for source separated organic wastes (SSO). The objective of this study was to characterize the state-of-the-practice of food waste treatment alternatives in the US and Canada. Site visits were conducted to aerobic composting and two anaerobic digestion facilities, in addition to meetings with officials that are responsible for program implementation and financing. The technology to produce useful products from either aerobic or anaerobic treatment of SSO is in place. However, there are a number of implementation issues that must be addressed, principally project economics and feedstock purity. Project economics varied by region based on landfill disposal fees. Feedstock purity can be obtained by enforcement of contaminant standards and/or manual or mechanical sorting of the feedstock prior to and after treatment. Future SSO diversion will be governed by economics and policy incentives, including landfill organics bans and climate change mitigation policies.     

Review on fate of chlorine during thermal processing of solid wastes

Chlorine(Cl) is extensively present in solid wastes, causing significant problems during the thermal conversion of waste to energy or fuels, by combustion, gasification or pyrolysis.This paper introduces the analytical methods for determining the Cl content in solid materials and presents the concentrations of Cl in various types of wastes, as reported in literature. Then, it provides a comprehensive analysis on the Cl emission behavior and Cl species formed during the thermal processing of the inorganic and organic Cl sources. The challenges resulted from the reactions between the formed Cl species and the ferrous metals, the heavy metals and the organic matters are summarized and discussed, e.g., high temperature corrosion, heavy metal evaporation and dioxin formation. The quality degradation of products(oil, char and syngas) by Cl is analyzed. Finally, the available controlling methods of Cl emission, including pre-treatment(water washing, sorting,microwave irradiation and stepwise pyrolysis) and in-furnace(absorbents, co-treatment and catalysts) methods are assessed.     

Dioxin emissions from municipal solid waste incinerators (MSWIs) in France

The objective of this study was to determine whether the fear of dioxin/furan emissions from waste-to-energy plants was justified by the 2007 status of emissions of French municipal solid waste incinerators (MSWIs). All emissions were examined, plant by plant, but this paper focuses on the incinerator emission that is most frequently mentioned in the French media, toxic dioxins and furans. The study showed that there are 85 large MSWI that generate electricity or heat, i.e., waste-to-energy (WTE) plants, and 39 smaller MSW incinerators. The results showed that all French MSWI are operated well below the EU and French standard of 0.1 ng TEQ Nm^?3 (toxic equivalent nanograms per standard cubic meter) and that their total dioxin/furan emissions decreased from 435 g TEQ in 1997 to only 1.2 g in 2008. All other industrial emissions of dioxins have also decreased and the major source is residential combustion of wood (320 g TEQ). It was extremely difficult to obtain MSWI emission data. This unwarranted lack of transparency has resulted in the public perception that MSWI plants are major contributors to dioxin emissions while in fact they have ceased to be so.