Emerging trends in photodegradation of petrochemical wastes: a review

Various human activities like mining and extraction of mineral oils have been used for the modernization of society and well-beings. However, the by-products such as petrochemical wastes generated from such industries are carcinogenic and toxic, which had increased environmental pollution and risks to human health several folds. Various methods such as physical, chemical and biological methods have been used to degrade these pollutants from wastewater. Advance oxidation processes (AOPs) are evolving techniques for efficient sequestration of chemically stable and less biodegradable organic pollutants. In the present review, photocatalytic degradation of petrochemical wastes containing monoaromatic and poly-aromatic hydrocarbons has been studied using various heterogeneous photocatalysts (such as TiO₂, ZnO and CdS. The present article seeks to offer a scientific and technical overview of the current trend in the use of the photocatalyst for remediation and degradation of petrochemical waste depending upon the recent advances in photodegradation of petrochemical research using bibliometric analysis. We further outlined the effect of various heterogeneous catalysts and their ecotoxicity, various degradation pathways of petrochemical wastes, the key regulatory parameters and the reactors used. A critical analysis of the available literature revealed that TiO₂ is widely reported in the degradation processes along with other semiconductors/nanomaterials in visible and UV light irradiation. Further, various degradation studies have been carried out at laboratory scale in the presence of UV light. However, further elaborative research is needed for successful application of the laboratory scale techniques to pilot-scale operation and to develop environmental friendly catalysts which support the sustainable treatment technology with the “zero concept” of industrial wastewater. Nevertheless, there is a need to develop more effective methods which consume less energy and are more efficient in pilot scale for the demineralization of pollutant.     

Degradations of endocrine-disrupting chemicals and pharmaceutical compounds in wastewater with carbon-based nanomaterials: a critical review

Environmental Science and Pollution Research - Although water occupies 75% of the earth’s surface, only 0.0067% of the total water is available for human activities. These statistics further...     

Estimation of age-related vulnerability to air pollution: assessment of respiratory health at local scale

This paper demonstrates association of short-term variation in pollution and health outcomes within the same geographical area for a typical urban setting in the northern part of the UK from time series analysis. It utilises publicly available datasets for regulated air pollutants (PM??, NO?, SO?, CO and O?), meteorology and respiratory hospital admissions (and mortality) between April 2002 and December 2005 to estimate the respiratory health effect of pollution exposure, mainly in the elderly. Our results show that PM?? and O? are positively associated with respiratory hospital admissions in the elderly, specifically in the age group 70-79. CO effects seem to be concentrated on the most elderly age group (80+) whereas NO? seems to have the opposite age-related effect, with lower effects on the more elderly.     

Towards greening a university campus: The case of the University of Maribor, Slovenia

The environmental performance of the University of Maribor (Engineering Campus) has been assessed on a life cycle basis. The following activities have been considered in the study: the use and operation of lecture theatres (construction and maintenance, heating, lighting and water consumption) and day-to-day consumption of sundries (paper and plastic bottles). The results indicate that the heating and construction of buildings are the ‘hot spots’ in the system, for most environmental impacts. Different waste management options for the plastic and paper, including recycling, incineration and landfill, have also been compared for environmental impacts and economic costs. The option combining 70% recycling, 29% incineration and 1% landfill has been found to be most economically and environmentally sustainable.     

Evaluation of RothC model using four Long Term Fertilizer Experiments in black soils, India

Carbon content in soils changes depending on the land use system, type of management practice and time. There is an increasing concern about the soil quality vis-à-vis organic carbon content in soils due to global warming and enhanced CO₂ concentration in the atmosphere. This has led to estimate carbon stock in soils at global and regional levels. The objective of the present study was to evaluate RothC model to estimate total organic carbon (TOC) changes under four long term fertilizer experimental sites representing sub-humid moist (Sarol and Nabibagh), sub-humid dry (Panjri) and semi-arid (Teligi) climate in India. The plant carbon input rate was calibrated using organic carbon and other soil parameters using RothC. The results showed that RothC could simulate changes in TOC in two contrasting eco-sites for surface soil layers. The root mean square error (RMSE) considered as modelling error ranged from 11.50 to 15.01, 4.70 to 11.60, 2.14 to 6.52 and 1.45 to 13.74 in the surface layers of Sarol, Nabibagh, Panjri, and Teligi sites, respectively. The simulation biases expressed by M (relative error) by Student‘t’ value for all the treatments at these sites were non-significant with two exceptions. Observed trends in TOC consist of an increase for all the four treatments in the sub-humid site of Sarol and Nabibagh; while manures alone or in combination increase TOC appreciably in Teligi and Panjri. TOC remained, however, almost similar over years for the control (no fertilizer or manure) and NPK treatments in all the four sites. Analysis of RothC output data showed that this model could be used as a tool to arrive at different threshold values of rainfall to influence decomposition rate modifier and thus to find out rate of organic carbon sequestration in various bioclimatic systems.     

An integrated tool to assess the role of new planting in PM10 capture and the human health benefits: A case study in London

The role of vegetation in mitigating the effects of PM₁₀ pollution has been highlighted as one potential benefit of urban greenspace. An integrated modelling approach is presented which utilises air dispersion (ADMS-Urban) and particulate interception (UFORE) to predict the PM₁₀ concentrations both before and after greenspace establishment, using a 10 × 10 km area of East London Green Grid (ELGG) as a case study. The corresponding health benefits, in terms of premature mortality and respiratory hospital admissions, as a result of the reduced exposure of the local population are also modelled. PM₁₀ capture from the scenario comprising 75% grassland, 20% sycamore maple (Acer pseudoplatanus L.) and 5% Douglas fir (Pseudotsuga menziesii (Mirb.) Franco) was estimated to be 90.41 t yr⁻¹, equating to 0.009 t ha⁻¹ yr⁻¹ over the whole study area. The human health modelling estimated that 2 deaths and 2 hospital admissions would be averted per year.     

Biodegradation of C.I. Acid Red 1 by indigenous bacteria <Emphasis Type="Italic">Stenotrophomonas</Emphasis> sp. BHUSSp X2 isolated from dye contaminated soil

A significant proportion of xenobiotic recalcitrant azo dyes are being released in environment during carpet dyeing. The bacterial strain Stenotrophomonas sp. BHUSSp X2 was isolated from dye contaminated soil of carpet industry, Bhadohi, India. The isolated bacterial strain was identified morphologically, biochemically, and on the basis of 16S rRNA gene sequence. The isolate decolorized 97 % of C.I. Acid Red 1 (Acid RED G) at the concentration of 200 mg/l within 6 h under optimum static conditions (temperature ?35 °C, pH 8, and initial cell concentration 7?×?10⁷ cell/ml). Drastic reduction in dye degradation rate was observed beyond initial dye concentration from 500 mg/l (90 %), and it reaches to 25 % at 1000 mg/l under same set of conditions. The analysis related to decolorization and degradation was done using UV-Vis spectrophotometer, HPLC, and FTIR, whereas the GC-MS technique was utilized for the identification of degradation products. Phytotoxicity analysis revealed that degradation products are less toxic as compared to the original dye.     

Air flow and concentration fields at urban road intersections for improved understanding of personal exposure

This paper reviews the state of knowledge on modelling air flow and concentration fields at road intersections. The first part covers the available literature from the past two decades on experimental (both field and wind tunnel) and modelling activities in order to provide insight into the physical basis of flow behaviour at a typical cross-street intersection. This is followed by a review of associated investigations of the impact of traffic-generated localised turbulence on the concentration fields due to emissions from vehicles. There is a discussion on the role of adequate characterisation of vehicle-induced turbulence in making predictions using hybrid models, combining the merits of conventional approaches with information obtained from more detailed modelling. This concludes that, despite advancements in computational techniques, there are crucial knowledge gaps affecting the parameterisations used in current models for individual exposure. This is specifically relevant to the growing impetus on walking and cycling activities on urban roads in the context of current drives for sustainable transport and healthy living. Due to inherently longer travel times involved during such trips, compared to automotive transport, pedestrians and cyclists are subjected to higher levels of exposure to emissions. Current modelling tools seem to under-predict this exposure because of limitations in their design and in the empirical parameters employed.     

An integrated approach to assessing the environmental and health impacts of pollution in the urban environment: Methodology and a case study

This paper presents a new decision-support methodology and software tool for sustainable management of urban pollution. A number of different methods and tools are integrated within the same platform, including GIS, LCA, fate and transport modelling, health impact assessment and multi-criteria decision analysis. The application of the framework is illustrated on a case study which investigates the environmental and health impacts of pollution arising from different industrial, domestic and transport sources in a city. The example city chosen for the study is Sheffield, UK, and the main pollutants considered are NO_x, SO₂ and PM10. The results suggest that the absence of the current large industrial sources in the city would lead to a 90% reduction of the SO₂ and 70% of the NO₂ ground concentrations, consequently preventing 27 deaths and 18 respiratory hospital admissions per annum for a population of 500,000. Based on the total annual mortality and hospital admissions in Sheffield for the year of the assessment, this means that 0.53% of premature deaths and 0.49% of respiratory hospital admissions would be prevented by the estimated reduction in air pollution.     

Measurements of atmospheric aerosol size distributions by co-located optical particle counters

Ambient aerosol number concentrations and size distributions were measured in both indoor and outdoor environments using two identical co-located and concurrently operated optical particle counters (OPCs). Indoor measurements were performed in a research laboratory, whereas two different locations were used for outdoor measurements; the sampling duration exceeded 12 hours and one hour respectively. Results from the two OPCs have been presented for eight size classes between 0.5 and 20 [micro sign]m, represented by central value diameters 0.875, 1.5, 2.75, 4.25, 6.25, 8.75, 12.5 and 15 microm. Overall, for the six indoor and outdoor experiments conducted at different times of day, the mean particle count ratios from the two OPCs for the individual samples showed +/-20% variation for indoor experiments and +/-50% variations for outdoor experiments. Significant random departures of the mean ratios from unity at all size classes were noticed even for indoor sample periods exceeding 20 hours. However, the coefficient of determination (R(2)) for the plots of readings from the two OPCs indicated higher consistency for "fine" particles (0.5-3.5 microm) than for "coarse" particles (10-20 microm), with average R(2) > 0.8 and R(2) < 0.5 respectively. Poisson counting statistics help to explain the divergence in the latter case where number concentrations were very low for the outdoor experiments. However, it cannot explain the divergence for indoor measurements where the concentrations were much higher. Increasing the averaging period reduced the scatter, especially in size classes with low number concentration. However, this procedure may lead to over-smoothing of data for environments with rapidly changing number concentration. These results indicate that, when two such analysers are used for comparative studies, the divergence between their responses may generate significant values of source contribution or deposition flux, even for nominally similar aerosol populations.