Assessment of the efficacy of slow-release formulations of the tribenuron-methyl herbicide in field-grown spring wheat

Environmental Science and Pollution Research - The efficacy of slow-release formulations of tribenuron-methyl (TBM) embedded in the matrix of degradable poly(3-hydroxybutyrate) blended with birch...     

Herbicidal activity of slow-release herbicide formulations in wheat stands infested by weeds

The present study reports the herbicidal activity of metribuzin and tribenuron-methyl embedded in the degradable matrix of natural poly-3-hydroxybutyrate [P(3HB)/MET and P(3HB)/TBM]. The developed formulations were constructed as films and microgranules, which were tested against the weeds such as white sweet clover Melilotus albus and lamb's quarters Chenopodium album in the presence of soft spring wheat (Triticum aestivum, cv. Altaiskaya 70) as the subject crop for investigation. The activity was measured in laboratory scale experiments by determining the density and weight of the vegetative organs of weeds. The study was also aimed at testing the effect of the experimental formulation on the growth of wheat crop as dependent on the method of herbicide delivery. The experimental MET and TBM formulations showed pronounced herbicidal activity against the weed species used in the study. The effectiveness of the experimental formulations in inhibiting weed growth was comparable to and, sometimes, higher than that of the commercial formulations (positive control). The amount of the biomass of the wheat treated with the experimental herbicide formulations was significantly greater than that of the wheat treated with commercial formulations.     

Metamodelling-based Product Family Design of Plug-in Hybrid Electric Vehicles

Development of plug-in hybrid electric vehicles (PHEVs) is stimulated by the need to replace non-renewable energies with sustainable and more environment-friendly new energy types. PHEVs benefit from a combination of an internal combustion engine and an electric motor with a rechargeable and larger battery pack than conventional hybrid vehicles. In order to maximise customer satisfaction and motivate replacement of the conventional vehicles with this new technology, the design of PHEVs requires sufficient differentiation in the product specifications for diverse market segments. The added set-up time, processes, costs and longer lead time for designing and manufacturing a diverse range of such vehicles is a hurdle towards increasing their diversity. This study proposes an efficient product family design (PFD) method for mass customisation of the PHEV powertrains. The methodology is less dependent on expensive simulations due to use of metamodelling and non-conventional sensitivity analysis. The PFD concept and its implications to a family of five PHEVs are investigated, and benefits as well as limitations of a sustainable development for this complex product are discussed.     

Devulcanization of Ground Tires by Different Strains of Bacteria: Optimization of Culture Condition by Taguchi Method

Biological devulcanization of ground tires (GTs) was evaluated by eleven different bacteria belonging to the genera Thiobacillus, Gordonia, Nocardia, Amycolaptopsis and Pseudomonas. The GTs were treated by each bacterium in a mineral medium and devulcanization was measured by increasing the sulfate of the medium and decreasing the sulfur of the GTs. The effects of incubation time (10 and 20 days) and the percent of ground tire in the medium (0.5 and 5 w/v %) on desulfurization were investigated. No significant changes were observed after 10 days of incubation. The total sulfur contents of all bio-treated GTs were decreased by 6–21% in 0.5% GTs after 20 days of incubation. While in 5% GTs, the total sulfur contents were mainly decreased using Thiobacillus ferroxidans DSMZ 583 and PTCC 1647 up to 27 and 15%, respectively. SEM photograph further indicated a good coherency interface between the bacteria and the GTs. Subsequently, Taguchi method was applied for the optimization of the culture condition of DSMZ 583. An L12 orthogonal array was performed by which the effects of eleven factors in two levels were evaluated. It was found that the amount and mesh size of GTs are the most important factors in biological devulcanization of ground tires.     

Antifungal activity of P3HB microparticles containing tebuconazole

In this study, tebuconazole (TEB)-loaded poly-3-hydroxybutyrate (P3HB)-based microparticles were developed and comprehensively characterized. TEB-loaded microparticles with the initial loading amounts of the fungicide of 10, 25, and 50% of the polymer mass (TEB 10, TEB 25, and TEB 50%) were prepared using emulsion technique. Encapsulation efficiency of TEB varied from 59 to 86%. As the loading amount was increased, the average diameter of microparticles increased too, from 41.3 to 71.7?µm, while zeta potential was not influenced by TEB loading, varying between –32.6 and –35.7?mV. TEB was gradually released from the microparticles to the model medium, and after 60?d, from 25 to 43% of TEB was released depending on the content of the encapsulated fungicide. The data obtained from in vitro TEB release were fitted to different mathematical models. It was shown that the release profiles of TEB could be best explained by the Zero-order, Higuchi, and Hixson–Crowell models. The antifungal activity of the P3HB/TEB microparticles against phytopathogenic fungi Fusarium moniliforme and Fusarium solani was demonstrated by in vitro tests conducted in Petri dishes. Thus, hydrophobic agrochemicals (TEB) can be effectively encapsulated into P3HB microparticles to construct slow-release formulations.     

Constructing herbicide metribuzin sustained-release formulations based on the natural polymer poly-3-hydroxybutyrate as a degradable matrix

Polymer poly(3-hydroxybutyrate) [P(3HB)] has been used as a matrix in slow-release formulations of the herbicide metribuzin (MET). Physical P(3HB)/MET mixtures in the form of solutions, powders, and emulsions were used to construct different metribuzin formulations (films, granules, pellets, and microparticles). SEM, X-Ray, and DSC proved the stability of these formulations incubated in sterile water in vitro for long periods of time (up to 49 days). Metribuzin release from the polymer matrix has been also studied. By varying the shape of formulations (microparticles, granules, films, and pellets), we were able to control the release time of metribuzin, increasing or decreasing it.     

An investigation into the socioeconomic aspects of two major earthquakes in Iran

An evaluation of the socioeconomic consequences of earthquakes is an essential part of the development of risk reduction and disaster management plans. However, these variables are not normally addressed sufficiently after strong earthquakes; researchers and relevant stakeholders focus primarily on the physical damage and casualties. The importance of the socioeconomic consequences of seismic events became clearer in Iran after the Bam earthquake on 26 December 2003, as demonstrated by the formulation and approval of various laws and ordinances. This paper reviews the country's regulatory framework in the light of the socioeconomic aspects of two major and destructive earthquakes: in Manjil–Rudbar in 1990, and in Bam in 2003. The results take the form of recommendations and practical strategies for incorporating the socioeconomic dimensions of earthquakes in disaster risk management planning. The results presented here can be applied in other countries with similar conditions to those of Iran in order to improve public preparedness and risk reduction.