Biosurfactants during in situ bioremediation: factors that influence the production and challenges in evalution

Research on the influence of biosurfactants on the efficiency of in situ bioremediation of contaminated soil is continuously growing. Despite the constant progress in understanding the mechanisms involved in the effects of biosurfactants, there are still many factors that are not sufficiently elucidated. There is a lack of research on autochthonous or exogenous microbial metabolism when biostimulation or bioaugmentation is carried out to produce biosurfactants at contaminated sites. In addition, studies on the application of techniques that measure the biosurfactants produced in situ are needed. This is important because, although the positive influence of biosurfactants is often reported, there are also studies where no effect or negative effects have been observed. This review aimed to examine some studies on factors that can improve the production of biosurfactants in soils during in situ bioremediation. Moreover, this work reviews the methodologies that can be used for measuring the production of these biocomposts. We reviewed studies on the potential of biosurfactants to improve the bioremediation of hydrocarbons, as well as the limitations of methods for the production of these biomolecules by microorganisms in soil.     

Simultaneous removal of emerging contaminants and disinfection for municipal wastewater treatment plant effluent quality improvement: a systemic analysis of the literature

Environmental Science and Pollution Research - This work presents a bibliographic review of the literature regarding the simultaneous removal of contaminants of emerging concern (CECs) and...     

Sustainable consumption in Brazil: Identification of preliminary requirements to guide product development and the definition of public policies

Sustainable product development is closely related to sustainable consumption. The understanding of consumers' purchase, use and discard behaviours may facilitate the identification of requirements to guide manufacturers in the development of sustainable goods and services. The aim of this paper is to investigate consumers' perception about factors that motivate or discourage the consumption of sustainable products to identify demands and convert them into requirements. South Brazilian green and traditional consumers were asked to complete an exploratory qualitative questionnaire. Their answers were organized and compared to identify differences and similarities between the demands of these two groups. Furthermore, demands were converted into requirements for packages, products, manufactures, stores planning and discard systems. The interpretation of factors that motivate or discourage the purchase of sustainable products given by interviewees led to the creation of a list of possible public policies or programmes, aiming to support sustainable consumption. The results demonstrate the necessity of further quantitative investigation between consumer groups, for validation purposes.     

Atmospheric composition change research: Time to go post-normal?

For more than two decades a number of frameworks for scientific knowledge production are being proposed by science and technology researchers. They all advocate an extended involvement of non-specialists, in particular when it comes to knowledge production applicable to practical societal problems. We look to what extent these new frameworks have taken ground within a particular research community: the ACCENT Network of Excellence which coordinates European atmospheric chemistry and physics research applicable to air pollution and climate change. We did so by stimulating a debate through a “blog”, a survey and in-depth interviews with ACCENT scientists about the interaction between science, policy making and civil society, to which a great deal of ACCENT member contributed in writing or verbally. Most of them had interactions with policy makers and/or the general public, and they generally believe that interactions with spheres other than the scientific are needed. While such interactions give personal insight and satisfaction, they seem to have little impact on the goals and the practice of the scientific work itself. Extended frameworks of science production that go beyond the disciplinary mode seem to emerge at the level of individual scientists, yet they still need to find their way to the level of scientific project management. In this paper we discuss the justifications and barriers to implement a higher degree of extended knowledge integration in applied science projects such as ACCENT. It is felt that the community of atmospheric chemists and physicists is mature for such an implementation and recommendations are given to help and make this happen.     

Cesium inhibition of motor activity in comparison to Lithium and Rubidium †

The biochemical and toxicological significance of cesium is scarcely understood, and could be evaluated in comparison with lithium widely used as a psychotropic drug. Two male Wistar rat groups of 200–220 g are administered independently, lithium, sodium, rubidium and cesium chloride, in doses of 3mEq/Kg/day (0.024 Eq/L drinking water) during 29 days. Motor activity was measured after the injection of 70 mg pargyline/Kg animal i.p. as inhibitor of MAO A + B with an activimeter of Tedeschy type. Accumulative movements per minute are presented in function of time. Total brain proteins, alkaline and acid phosphatases and blood parameters, haematocrit, haemoglobin and erythrocytes, were determined.

The maximal increase of motor activity was seen in rats treated with RbCl 2 h after the pargyline administration and the diminution was Rb>Li>Cs. Cesium induced a decrease of the total serum protein concentration from 6.39 ± 0.1 to 5.8±0.5mg/100ml serum in controls. Acid and alkaline phosphatase were decreased in cesium treated rats. The three determined blood parameters, haematocrit, haemoglobin and erythrocytes, show also a decrement with cesium treatment compared to the control ones.     

Conceptual and Numerical Modeling of Radionuclide Transport and Retention in Near-Surface Systems

Scenarios of barrier failure and radionuclide release to the near-surface environment are important to consider within performance and safety assessments of repositories for nuclear waste. A geological repository for spent nuclear fuel is planned at Forsmark, Sweden. Conceptual and numerical reactive transport models were developed in order to assess the retention capacity of the Quaternary till and clay deposits for selected radionuclides, in the event of an activity release from the repository. The elements considered were carbon (C), chlorine (Cl), cesium (Cs), iodine (I), molybdenum (Mo), niobium (Nb), nickel (Ni), radium (Ra), selenium (Se), strontium (Sr), technetium (Tc), thorium (Th), and uranium (U). According to the numerical predictions, the repository-derived nuclides that would be most significantly retained are Th, Ni, and Cs, mainly through sorption onto clays, followed by U, C, Sr, and Ra, trapped by sorption and/or incorporation into mineral phases.     

Concentrations of organochlorine pesticides and 2,4,6-trichloroanisole in cork bark

Organochlorine pesticides are persistent lipophilic organic pollutants and tend to accumulate in growing plants. During growth, cork is in contact with the open air for long periods (9-12 years). Owing to the previous widespread use of organochlorine pesticides and their high persistence in the environment, there is a risk that residues of such pesticides may be present in cork.In this study, the concentrations of 14 organochlorine pesticides—all of which are indicators of environmental pollution—were analyzed in cork bark samples from three regions in Spain and one in Portugal. In addition, the concentrations of 2,4,6-trichlorophenol (TCP) and 2,4,6-trichloroanisole (TCA) were also analyzed.Our results show only very low concentrations of lindane, γ-HCH (<2.6 ng g⁻¹) and its byproducts α-HCH (<3.5 ng g⁻¹) and β-HCH (<0.6 ng g⁻¹).Among the DDT and its metabolites, only two were found: p,p′-DDT was found in a cork sample from Extremadura (0.1 ng g⁻¹) and p,p′-DDE was present at a maximum concentration of 2.9 ng g⁻¹ in a cork sample from Castile-La Mancha. However, all concentrations were well below the legal limit established by Regulation (EC) No. 396/2005 (10 ng g⁻¹ in foodstuffs). We can conclude, therefore, that the cork samples we studied complied with food safety standards.     

Using plant biomonitors and flux modelling to develop O3 dose-response relationships in Catalonia

We used tobacco Bel-W3 biomonitoring data and ozone flux modelling (WINDEP model) with the aim of developing the absorbed dose-response relationship, and comparing this approach with the most commonly used AOT40 (the sum of hourly ozone concentrations above a cut-off of 40 ppb during daylight hours, when global radiation exceeds 50 W m(-2)) in the estimation of exposure-damage curves. Leaf damage values were more related to OAD(15 days, potential) (potential ozone absorbed dose calculated over 15 consecutive days) than to AOT40 in all the studied stations. An OAD(15 days, potential) of 180 mg m(-2) was found to be the threshold for damage to the most sensitive species in this region under well watered conditions. The results show the applicability of the flux approach for risk assessment at the local scale, the improvement of the ozone damage estimation when the potential absorbed dose is modelled and used instead of just the ozone exposure, and finally, the possibilities opened by the use of biomonitoring networks.     

Tradescantia micronucleus test indicates genotoxic potential of traffic emissions in European cities

Urban atmospheres contain complex mixtures of air pollutants including mutagenic and carcinogenic substances such as benzene, diesel soot, heavy metals and polycyclic aromatic hydrocarbons. In the frame of a European network for the assessment of air quality by the use of bioindicator plants, the Tradescantia micronucleus (Trad-MCN) test was applied to examine the genotoxicity of urban air pollution. Cuttings of Tradescantia clone #4430 were exposed to ambient air at 65 monitoring sites in 10 conurbations employing a standardised methodology. The tests revealed an elevated genotoxic potential mainly at those urban sites which were exposed to severe car traffic emissions. This bioassay proved to be a suitable tool to detect local 'hot spots' of mutagenic air pollution in urban areas. For its use in routine monitoring programmes, however, further standardisation of cultivation and exposure techniques is recommended in order to reduce the variability of results due to varying environmental conditions.