An assessment of heavy metals loading in River Benue in the Makurdi Metropolitan Area in Central Nigeria

River Benue, the second largest river in Nigeria, serves as the major source of municipal water supplies for towns and villages along its course. Water samples from the river were collected at ten stations in the Makurdi metropolitan area (7°44^′ N, 8°32^′ E) in Benue State, Central Nigeria, for 12 months and analyzed for their heavy metals concentration, along with other water-quality parameters such as turbidity, pH, total dissolved solids and total solids. The results revealed that the mean concentrations of heavy metals in the river was in the following ascending order, Cd < Cu < Zn < Mn < Pb < Cr < Fe. The levels of most of the parameters determined, with the exception of Cd, Cr and Pb were, generally, within acceptable limits for drinking water. From the present study, it is concluded that the River Benue is only moderately contaminated with regard to heavy metals, in the Makurdi metropolitan area.     

A comparative evaluation of wet digestion and dry ashing methods for the determination of some major and minor nutrients in composted manure

The analytical results of 53 manure samples determined by wet digestion and dry ashing procedures were compared in order to evaluate their relative suitability for recovering different nutrient elements in manure and manure compost. Wet digestion recovered greater amounts of phosphorus (P), potassium (K), calcium (Ca), manganese (Mn), and zinc (Zn) in more samples than dry ashing. Nutrient contents in the samples were highly variable, with coefficients of variation (CV) ranging from 38% for magnesium (Mg) to 161% for copper (Cu) analyzed by the wet digestion procedure, and from 47% to 138% for Mg and Cu analyzed by the dry ashing procedure. The mean values of P, K, Ca, Mn, and Zn averaged for the 53 samples were significantly higher using wet digestion than dry ashing procedure, but both procedures recovered comparable amounts of iorn (Fe), Mg, and Cu. Correlations analysis between both procedures for each element showed reasonable to fair agreements for Ca (R ²?=?0.93), K (R ²?=?0.93), P (R ²?=?0.90), Mg (R ²?=?0.84), Fe (R ²?=?0.87), Mn (R ²?=?0.73), and Cu (R ²?=?0.66), but poor agreement for Zn (R ²?=?0.44). The low agreement between procedures for Zn suggests that wet digestion, which gave a higher recovery, should be a preferred procedure for analyzing Zn in manures.     

Survey of solid waste generation and composition in a rapidly growing urban area in Central Nigeria

The objective of this study was to carry out a field survey of the solid waste generation profile in parts of Makurdi, a rapidly growing urban city in north central Nigeria. The areas surveyed covered low, medium and high-density residential quarters, representing high/medium/low income groups in the area. Results of the survey show that the bulk ( approximately 82%) of the solid waste generated in the area originates from households, rather than from commercial, institutional or industrial premises. Of the waste from households, a substantial proportion consists of various putrescible materials (36-57%), with ash, dust and sand (combined) forming another significant proportion (21-41%). From the non-household sources, putrescible matter is also significant (23-45%), as is the combined ash/dust/sand fraction (32-36%). The quantity of plastics/cellophane materials from household and non-household sources was, however, comparable (6-10%). There was more paper from commercial and institutional premises (9-12%) than from household or small/medium scale industrial premises (2-4%). Glass (0.1-6.9%), metals (mostly cans and bottle corks, 0.7-3.4%) and textiles (0.3-6%) form only a minor proportion of the waste across generators. Waste generation rates were for households, 0.54kg/cap/day; for commercial, 0.018kg/m(2)/day; institutional, 0.015kg/m(2)/day while for small and medium scale industries, the rate was 0.47kg/m(2)/day. As there is no previous study of this kind in the Makurdi urban area, what is reported here may be taken as baseline for the entire area. The implications of the findings for solid waste management planning are discussed.     

Characterization of trace elements in chicken and duck litter ash

For safe and sustainable management of poultry litter, it is important to evaluate and understand the chemical forms and concentrations of their constituent trace elements during treatment for disposal. This experiment was carried out to compare changes in metal (Cu, Mn, Zn, Pb and Ni) fractions in chicken and duck litter after incineration at temperatures ranging from 200 to 900 degrees C. The metals were stepwise fractionated into exchangeable, adsorbed, organically bound, carbonate precipitated and residual forms by extracting with 0.5M KNO3, de-ionized water, 0.5M NaOH, 0.05M Na2 EDTA and 4M HNO3, respectively. The content of total metal and other elements (i.e., Ca, Mg and K) were was also determined. Results showed an increasing trend in the total concentrations of metals with increasing temperature with higher amounts in chicken litter ash (CLA) than duck litter ash (DLA). Higher temperatures significantly reduced the levels of H2O-soluble Mn, Zn and Ni and enhanced those of Cu and Pb. The metal fractions extracted by EDTA and HNO3 increased directly with increasing temperature while the fraction extracted with KNO3 and NaOH decreased with ashing. For Cu, Mn, Pb and Ni, the amount extracted varied in the order EDTA>HNO3>NaOH>KNO3>H2O, but the absolute amounts differed between CLA and DLA. Peak concentrations of the total metals were achieved at the highest burning temperature. The amount of H2O soluble Ca and Mg decreased and K increased in both CLA and DLA with temperature. Total and exchangeable forms of cations increased with increasing temperature. Total Ca was highest in DLA, whereas total Mg and K were higher in CLA. This study indicated that incinerating poultry litter before soil application may have mixed effects on the vulnerable metal fractions by increasing or decreasing some fractions, depending on poultry type.     

Use of life cycle assessment methodology for determining phytoremediation potentials of maize-based cropping systems in fields with nitrogen fertilizer over-dose

Using the life cycle assessment (LCA) method, we analyzed the effects of different cropping systems (sole maize (CK), maize + soybean (CST) and maize + groundnut (CGT)) on the environment. The comprehensive index of environmental impacts varied in the order, sole maize > maize + groundnut > maize + soybean, with corresponding intercropping values of 0.1295, 0.1229 and 0.0945, respectively. The results showed that intercropping maize with suitable plants (e.g., groundnut and soybean) could reduce the adverse effects of over-application of nitrogen fertilizer on the environment. The study further showed that the LCA method may be a convenient and effective approach for analyzing the environmental impact of fertilizer management in agricultural fields.