不同来源腐殖酸的光解及过氧化氢对其影响

为探讨腐殖酸在环境中的行为及光解除去腐殖酸的可能性，利用大于２９０ｎｍ的模拟日光辐照，探讨了大骨节病病区、非病区腐殖酸和泥炭腐殖酸的光解过程和光解机理及过氧化氢对其光解的影响，发现随着光照时间的延长，腐殖酸水体系的总有机碳（ＴＯＣ）含量降低，ｐＨ值下降，过氧化氢可以促进腐殖酸的光解，其光解过程遵循一级动力学规律。计算了不同来源腐殖酸光解的速率及光解半衰期，发现土壤和泥炭腐殖酸比大骨节病病区饮水中腐     

Fate of organo‐heavy metal complexes of sludges from domestic wastes in soils: A simplified modelization

Simplified models provided information on the binding ability of organic acids with trace elements, the distribution of the formed organo‐heavy metal complexes at different pH, and the biological stability (biodegradation ability) of these complexes.     

Primary and secondary organic aerosol in an urban/industrial site: Sources, health implications and the role of plastic enriched waste burning

PM10 samples were collected from an urban/industrial site nearby Athens, where uncontrolled burning activities occur. PAHs, monocarboxylic, dicarboxylic, hydroxycarboxylic and aromatic acids, tracers from BVOC oxidation, biomass burning tracers and bisphenol A were determined. PAH, monocarboxylic acids, biomass burning tracers and bisphenol A were increased during autumn/winter, while BSOA tracers, dicarboxylic- and hydroxycarboxylic acids during summer. Regarding aromatic acids, different sources and formation mechanisms were indicated as benzoic, phthalic and trimellitic acids were peaked during summer whereas p-toluic, isophthalic and terephthalic were more abundant during autumn/winter. The Benzo[a]pyrene-equivalent carcinogenic power, carcinogenic and mutagenic activities were calculated showing significant (p < 0.05) increases during the colder months. Palmitic, succinic and malic acids were the most abundant monocarboxylic, dicarboxylic and hydrocarboxylic acids during the entire sampling period. Isoprene oxidation was the most significant contributor to BSOA as the isoprene-SOA compounds were two times more abundant than the pinene-SOA (13.4 ± 12.3 and 6.1 ± 2.9 ng/m³, respectively). Ozone has significant impact on the formation of many studied compounds showing significant correlations with: isoprene-SOA (r = 0.77), hydrocarboxylic acids (r = 0.69), pinene-SOA (r = 0.63),dicarboxylic acids (r = 0.58), and the sum of phthalic, benzoic and trimellitic acids (r = 0.44). PCA demonstrated five factors that could explain sources including plastic enriched waste burning (30.8%), oxidation of unsaturated fatty acids (23.0%), vehicle missions and cooking (9.2%), biomass burning (7.7%) and oxidation of VOCs (5.8%). The results highlight the significant contribution of plastic waste uncontrolled burning to the overall air quality degradation.     

Interrelationships of pollution load index, transfer factor, and concentration factor under the effect of sludge

A greenhouse experiment was conducted during 2010–2011. A complete randomized blocks design was used including seven treatment levels of sludge(tons per hectare), i.e., 0, 6, 12, 18, 24, 30, and “30+ treated wastewater”, in four replications. Lettuce (Lactuca sativa L var longifolia) was chosen as a test plant. The purpose of the experiment was to study the relationships between soil Pollution Load Index, heavy metal transfer factor, and concentration factor and to determine optimum concentration factor values. The following were found: several mathematical relationships were established between the above parameters that could be used for the study of heavy metal accumulation in soils and plants under the effect of the applied sludge. They can be also used for the calculation of one of the above parameters as a function of the others. Based on the experimental data, the optimum concentration factor for several heavy metals were determined by multiple linear regression analysis, expressing the concentration factor as a function of the maximum dry lettuce matter yield, and of optimum/minimum heavy metal content of plant dry matter. The mean value of the calculated concentration factor obtained for each separate metal was: Zn, 2.93; Cd, 0.39; Co, 1.47; and Ni, 0.52.     

Alpha-thalassaemia prenatal diagnosis by two PCR-based methods

In Cyprus all couples carrying α⁰-thalassaemia mutations are detected in the course of the thalassaemia carrier screening program and prenatal diagnosis is offered to all of them. Prenatal diagnosis for α-thalassaemia is routinely done by two independent molecular methods. With the first method, the mutations of the parents are directly determined by gap-PCR and then the chorionic villus sample (CVS) is examined for the presence of these mutations. With the other method, a (CA)_n repeat polymorphic site located between the ψα₁- and α₂-globin genes is used for determining the presence or absence of the normal and mutant alleles. In the period from 1995 to 1999, molecular analysis of 46 couples in which haematological data were consistent with deletion of two α-globin genes in both partners indicated that only 13 of them were actually at risk for haemoglobin (Hb) Bart's hydrops fetalis and prenatal diagnosis was provided in 16 pregnancies. The molecular diagnosis was possible in all cases with the use of both gap-PCR and (CA)_n repeat polymorphisms analysis. No misdiagnosed cases for α-thalassaemia have been reported to date. Copyright © 2001 John Wiley & Sons, Ltd.     

Soil pollution under the effect of treated municipal wastewater

Soil heavy metal pollution due to wastewater reuse was assessed by means of the concentration factor (CF) and/or pollution load index (PLI).In this respect, a greenhouse pot experiment was conducted, using a completely randomized block design, including five treatments of treated municipal wastewater (0%, 25%, 50%, 75%, and 100%), in four replications. Brassica oleracea var. Capitata was used as a test crop. The optimum CFs were expressed as a function of maximum dry matter of cabbage plant parts yield, and the values obtained per plant part were as follows: stems-Zn-CF 2.96, Co-CF 0.85, Ni-CF 0.92; whole plant-Cu-CF 3.90, Ni-CF 0.87, and Pb-CF 11.52; and leaves-Pb-CF 11.78. The PLI was calculated as the geometric mean of the CF of each metal, and was related to the maximum dry mater yield of cabbage stems and heads. The optimum values found were: stems PLI 1.99-2.55 and heads 2.25.     

Critical ranges of pollution indices: a tool for predicting soil metal pollution under long-term wastewater reuse

A greenhouse experiment was conducted in pots, for two years (2015–2016), in Amaliada, Greece, using a randomized block design, including six treatments with mixtures composed of Zn, Mn, Cd, Co, Cu, Cr, Ni, and Pb, each metal taking part in the mixture at concentrations of 0, 10, 20, 30 40, and 50 mg/kg soil in four replicates each. Beta vulgaris (beet) was used as a test plant. The aim of the experiment was to calibrate the following pollution indices: “pollution load index,” “elemental pollution index,” “heavy metal load,” and “total concentration factor,” in order to determine the level of soil pollution under variable levels (low to very high) of metal mixtures. The irrigation of the plants was conducted with treated municipal wastewater based on field capacity and percent wilting point. The above pollution indices were classified into four soil pollution classes, i.e., “optimum,” “low,” “high” and “very high” on the basis of percent dry matter plant losses.