Evaluation of concentration efficiency of the Pseudomonas aeruginosa phage PP7 in various water matrixes by different methods

Enteric viruses monitoring in surface waters requires the concentration of viruses before detection assays. The aim of this study was to evaluate different methods in terms of recovery efficiencies of bacteriophage PP7 of Pseudomonas aeruginosa, measured by real-time PCR, using it as a viral control process in water analysis. Different nucleic acid extraction methods (silica–guanidinium thiocyanate, a commercial kit (Qiagen Viral RNA Kit) and phenol–chloroform with alcohol precipitation) exhibited very low recovery efficiencies (0.08–4.18 %), being the most efficient the commercial kit used for subsequent experiments. To evaluate the efficiency of three concentration methods, PBS (as model for clean water) and water samples from rivers were seeded to reach high (HC, 10⁶ pfu ml^?1) and low concentrations (LC, 10⁴ pfu ml^?1) of PP7. Tangential ultrafiltration proved to be more efficient (50.36?±?12.91, 17.21?±?9.22 and 12.58?±?2.35 % for HC in PBS and two river samples, respectively) than adsorption–elution with negatively charged membranes (1.00?±?1.34, 2.79?±?2.62 and 0.05?±?0.08 % for HC in PBS and two river samples, respectively) and polyethylene glycol precipitation (15.95?±?7.43, 4.01?±?1.12 and 3.91?±?0.54 %, for HC in PBS and two river samples, respectively), being 3.2–50.4 times more efficient than the others for PBS and 2.7–252 times for river samples. Efficiencies also depended on the initial virus concentration and aqueous matrixes composition. In consequence, the incorporation of an internal standard like PP7 along the process is useful as a control of the water concentration procedure, the nucleic acid extraction, the presence of inhibitors and the variability of the recovery among replicas, and for the calculation of the sample limit of detection. Thus, the use of a process control, as presented here, is crucial for the accurate quantification of viral contamination.     

Using thermal units for estimating critical period of weed competition in off-season maize crop

Brazilian off-season maize production is characterized by low yield due to several factors, such as climate variability and inadequate management practices, specifically weed management. Thus, the goal of this study was to determinate the critical period of weed competition in off-season maize (Zea mays L.) crop using thermal units or growing degree days (GDD) approach to characterize crop growth and development. The study was carried out in experimental area of the University of S?o Paulo, Brazil, with weed control (C), as well as seven coexistence periods, 2, 4, 6, 8, and 12 leaves, flowering, and all crop cycle; fourteen treatments were done. Climate data were obtained from a weather station located close to the experimental area. To determine the critical period for weed control (CPWC) logistic models were fitted to yield data obtained in both W and C, as a function of GDD. For an arbitrary maximum yield loss fixed in 2.5%, the CPWC was found between 301 and 484 GDD (7-8 leaves). Also, when the arbitrary loss yield was fixed in 5 and 10%, the period before interference (PBI) was higher than the critical weed-free period (CWFP), suggesting that the weeds control can be done with only one application, between 144 and 410 GDD and 131 and 444 GDD (3-8 leaves), respectively. The GDD approach to characterize crop growth and development was successfully used to determine the critical period of weeds control in maize sown off-season. Further works will be necessary to better characterize the interaction and complexity of maize sown off-season with weeds. However, these results are encouraging because the possibility of the results to be extrapolated and because the potential of the method on providing important results to researchers, specifically crop modelers.     

A feeding inhibition based prediction of the toxic effect of dissolved metal mixtures upon Echinogammarus marinus (Crustacea: Amphipoda) at field relevant concentrations across a latitudinal gradient

Risk assessment of metals in the environment is performed mainly with toxicity evaluations on single metals, which is largely inadequate since these substances occur in mixtures. The development of models predicting combined toxic effects on the basis of the concentration-response relationships of individual compounds has emerged as an answer. In the present study, metal effects on post-exposure anorexia (the concept of FdC(50)--concentration causing 50% of feeding inhibition--is implemented) in Echinogammarus marinus, a widely distributed gammarid amphipod, were assessed and compared with modelled ones obtained through the application of the concentration addition (CA) model, which represents a reasonable worst-case scenario for the risk assessment of metal mixtures. Data were validated using in situ experiments performed along a latitudinal gradient (Iceland, Scotland and Portugal) aiming at establishing a geographic profile of autochthonous population susceptibilities to metals. For all of the metals studied concentrations in the water column at exposure sites were in good agreement with feeding inhibition levels. Models gave low to relatively high percentage agreement between predictions and experimental data. Boreal populations demonstrated higher susceptibility to single metals, but not to mixture exposures. Meridional populations denoted lower susceptibilities with higher FdC(50).     

Air pollution inhalation during acute exercise is dependent of the body mass index and ventilation of young men

Environmental Science and Pollution Research - Obesity and physical inactivity threaten human health, and both could be solved with exercise. However, a higher amount of pollutants is inhaled...     

Alternative herbicides to manage Italian ryegrass (Lolium multiflorum lam) resistant to glyphosate at different phenological stages

During the growing season of 2002--2003, field and greenhouse experiments were conducted with the objective of evaluating the influence of Italian ryegrass phenological stages and management alternatives on the control of resistant biotypes to glyphosate. Three field experiments were conducted in Lagoa Vermelha, RS, Brazil and glyphosate was applied alone and in combinations with alternative herbicides. Two greenhouse experiments were also conducted at the Department of Crop Science, ESALQ/USP, Piracicaba, SP, Brazil. The Italian ryegrass resistant population was collected from Lagoa Vermelha, RS, Brazil. From the results it was possible to conclude that: (i) the more advanced the phenological stage of application, the more difficult the control of resistant Italian ryegrass by glyphosate, mainly by the rate of 960 g a.i. ha(-1); however, this rate applied at earlier phenological stage (five tillers), the control was higher than 90%; (ii) with the increment of glyphosate rate, it significant response was observed on the control at all stages of application; (iii) the mixture of glyphosate + clethodim (1440 + 72 g a.i. ha(-1)), paraquat + diuron (500 + 250 g a.i. ha(-1)), at all stages of application and clethodim (96 g a.i. ha(-1)) and paraquat + diuron (300 + 150 g a.i. ha(-1)) at the initial stages until pre-flowering were excellent alternatives for management of these populations; and (iv) the response of control was much faster for the mixture of glyphosate + clethodim, independently of growth stage.     

Behaviour of oxyfluorfen in soils amended with edaphic biostimulants/biofertilizers obtained from sewage sludge and chicken feathers. Effects on soil biological properties

We studied the behaviour of oxyfluorfen herbicide at a rate of 4 l ha^?1 on biological properties of a Calcaric Regosol amended with two edaphic biostimulants/biofertilizers (SS, derived from sewage sludge; and CF, derived from chicken feathers). Oxyfluorfen was surface broadcast on 11 March 2013. Two days after application of oxyfluorfen to soil, both biostimulants/biofertilizers (BS) were also applied to the soil. An unamended soil without oxyfluorfen was used as control. For 2, 4, 7, 9, 20, 30, 60, 90 and 120 days of the application of herbicide to the soil and for each treatment, the soil dehydrogenase, urease, β-glucosidase and phosphatase activities were measured. For 2, 7, 30 and 120 days of the application of herbicide to the soil and for each treatment, soil microbial community was determined. The application of both BS to soil without the herbicide increased the enzymatic activities and soil biodiversity, mainly at 7 days of beginning the experiment. However, this stimulation was higher in the soil amended with SS than for CF. The application of herbicide in organic-amended soils decreased the inhibition of soil enzymatic activities and soil biodiversity. Possibly, the low-molecular-weight protein content easily assimilated by soil microorganisms is responsible for less inhibition of these soil biological properties.     

Automated method for the determination of total arsenic and selenium in natural and drinking water by HG-AAS

A multicommutated flow system was designed and evaluated for the determination of total arsenic and selenium by Hydride Generation Atomic Absorption Spectrometry (HG-AAS). It was applied to the determination of arsenic and selenium in samples of natural and drinking water. Detection limits were 0.46 and 0.08 μg l⁻¹ for arsenic and selenium, respectively; sampling frequency was 120 samples h⁻¹ for arsenic and 160 samples h⁻¹ for selenium. Linear ranges found were 1.54–10 μg l⁻¹ (R = 0.999) for arsenic and 0.27–27 μg l⁻¹ (R = 0.999) for selenium. Accuracy was evaluated by spiking various water samples and using a reference material. Recoveries were in the range 95–116%. Analytical precision (s _r (%), n = 10) was 6% for both elements. Compared with the Standard Methods, APHA, 3114B manual method, the system consumes at least 10 times less sample per determination, and the quantities of acid and reducing agent used are significantly lower with a reduction in the generation of pollutants and waste. As an additional advantage, the system is very fast, efficient and environmentally friendly for monitoring total arsenic and selenium levels in waters.     

Bioavailability, ecotoxicity, and geological characteristics of trace lead in sediments from two sites on Negro River, Uruguay, South America

Bioassays of two sites along the Rio Negro in Uruguay indicate ecotoxicity, which could be attributable to trace concentrations of lead in river sediments. Monthly samples at two sites at Baygorria and Bonete locations were analyzed for both particle size and lead. Lead was determined by atomic spectrometry in river water and sediment and particle size by sieving and sedimentation. Data showed that Baygorria's sediments have greater percentage of clay than Bonete's (20.4 and 5.8%, respectively). Lead was measurable in Baygorria's sediments, meanwhile in Bonete's, it was always below the detection limit. In water samples, lead was below detection limit at both sites. Bioassays using sub-lethal growth and survival test with Hyalella curvispina amphipod, screening with bioluminescent bacteria Photobacterium leiognathi, and acute toxicity bioassay with Pimephales promelas fish indicated toxicity at Baygorria, with much less effect at Bonete. Even though no lethal effects could be demonstrated, higher sub-lethal toxicity was found in samples from Baygorria site, showing a possible concentration of the contaminant in the clay fraction.