The case for variable density: a new perspective on activated sludge settling.

A new, simple method for directly measuring activated sludge density was developed and applied, and the effects of biomass density on activated sludge settling in full-scale systems were evaluated. The driving force of sedimentation is the physical weight of the biological solids, but the role of biomass density in sedimentation has been largely ignored. Biomass density varied amongst treatment systems and this variability was correlated with settleability. Floc densities were approximately normally distributed within individual samples. Nonsoluble phosphorus content was a major contributor to density, and plants with enhanced biological phosphorus removal (EBPR) configurations generally had higher densities and better settleability than non-EBPR plants with similar filament contents. These results suggest that future work may benefit from consideration of density as a factor affecting activated sludge settling.     

Towards a planning support system for environmental management and agri-environmental measures--the Colorfields study

The authors present the beginnings of a planning support system (PSS) for agri-environmental measures exemplified by a virtual implementation of Colorfields and blooming strips on model farms, based on real-world data. This paper starts with an introduction to the Colorfields, a concept for transdisciplinary and sustainable landscape design of set-aside land. Colorfields comprise of blooming strips of flowering annual or biennial plants, which are designed and drilled in pattern on fallow land creating Land Art. The temporary scenic arrangements of the Colorfields combine the advantages of ecological strips, e.g. providing habitats for insects (especially bees), improving soil fertility through the cultivation of intercrops, with improvements of the social recognition of farmers as producers of pleasant landscapes instead of monoculture fields.The prototype of the PSS uses two software tools of different scientific origin, the bio-economic modeling system MODAM and the landscape visualization system Lenné3D, which are linked based on geo-data. The resulting system helps to assess the economic effects and visualizes the effects of the specific landuse patterns under different scenarios.The economic assessment of blooming strips on arable land and of one Colorfield on fallow land shows that these measures prove to be profitable from an economic viewpoint assuming the current area payments for the obligatory European Union set-aside program. Furthermore, the visualizations enable the design to be tested virtually by exploring the resultant scenery. They provide artists, planners and stakeholders including farmers with a tool to virtually wander through landscape scenarios supporting a collaborative design and a shared vision for the community.The results of the two model farms and previous case studies for Colorfields demonstrate how current policy conditions could be used for the improvement of environmental and scenic qualities. Furthermore, the ability of the tools, MODAM and Lenné3D, suggests to support and promote these activities.     

Examining the joint toxicity of chlorpyrifos and atrazine in the aquatic species: Lepomis macrochirus, Pimephales promelas and Chironomus tentans

The joint toxicity of chlorpyrifos and atrazine was compared to that of chlorpyrifos alone to discern any greater than additive response using both acute toxicity testing and whole-body residue analysis. In addition, acetylcholinesterase (AChE) inhibition and biotransformation were investigated to evaluate the toxic mode of action of chlorpyrifos in the presence of atrazine. The joint toxicity of atrazine and chlorpyrifos exhibited no significant difference in Lepomis macrochirus compared to chlorpyrifos alone; while studies performed with Pimephales promelas and Chironomus tentans, did show significant differences. AChE activity and biotransformation showed no significant differences between the joint toxicity of atrazine and chlorpyrifos and that of chlorpyrifos alone. From the data collected, the combination of atrazine and chlorpyrifos pose little additional risk than that of chlorpyrifos alone to the tested fish species.     

Adoption Potential of Conservation Agriculture Practices in Sub-Saharan Africa: Results from Five Case Studies

Despite the reported benefits of conservation agriculture (CA), its wider up-scaling in Sub-Saharan Africa (SSA) has remained fairly limited. This paper shows how a newly developed qualitative expert assessment approach for CA adoption (QAToCA) was applied to determine its adoption potential in SSA. CA adoption potential is not a predictor of observed adoption rates. Instead, our aim was to systematically check relevant factors that may be influencing its adoption. QAToCA delivers an assessment of how suitable conditions “and thus the likelihood for CA adoption” are. Results show that the high CA adoption potentials exhibited by the Malawi and Zambia case relate mostly to positive institutional factors. On the other hand, the low adoption potential of the Zimbabwe case, in spite of observed higher estimates, is attributed mainly to unstable and less secured market conditions for CA. In the case of Southern Burkina Faso, the potential for CA adoption is determined to be high, and this assessment deviates from lower observed figures. This is attributed mainly to strong competition of CA and livestock for residues in this region. Lastly, the high adoption potential found in Northern Burkina Faso is explained mainly by the fact that farmers here have no alternative other than to adopt the locally adapted CA system—Zaï farming. Results of this assessment should help promoters of CA in the given regions to reflect on their activities and to eventually adjust or redesign them based on a more explicit understanding of where problems and opportunities are found.     

On the function of warning coloration: a black and yellow pattern inhibits prey-attack by naive domestic chicks

Summary Young chicks were offered a choice of warningly coloured black and yellow and non-warningly coloured green (or olive) prey. Unfed chicks were given palatable painted mealworms on their first day. They directed their first peck at both colour types at the same probability; however, they ate the warningly coloured ones at a much lower rate. This is due to an inhibition of attack which becomes effective after pecking. Chicks which were a few days old showed the same behaviour. Since the control prey was in this case painted with an olive mixture containing the same colours as the warningly coloured mealworms, it can be concluded that the inhibition is caused by the black and yellow coloration. With accumulating positive experience of the chicks, the inhibition decreased. For permanent avoidance it must therefore be supplemented by unpleasant experience. Accordingly, chicks handled the unpalatable black and yellow ringed caterpillars of Tyria jacobaeae only a few times and always for a short period when offered repeatedly. The inhibition caused by the black and yellow pattern is attributed to a genetically fixed predisposition to avoid warningly coloured black and yellow prey which is the result of evolutionary adaptation.     

A net water production model for ultrafiltration including flow direction reversal and chemically assisted backwashing.

Flow direction reversal (FDR) was proposed as a novel method to increase net water production (NWP) during cross-flow ultrafiltration. The design of the pilot-plant study allowed measurement of specific flux recovery after each chemically assisted backwash (BW) combined with FDR and after each FDR at the midpoint of each BW/FDR cycle. The percent recovery of specific flux was higher following FDR (55%) than combined BW and FDR (53%) at lower chemical dosages; however, the percent increase in specific flux recovery by FDR was much lower (20%) when the chemical dose was doubled. A mathematical model was developed to predict the NWP achieved by any combination ofBW/ FDR and FDR frequency. For example, the advantage of introducing FDR was demonstrated at the lower chlorine dose, whereby the percent increase in NWP by alternating 15-minute intervals of BW/FDR with FDR over BW/ FDR alone was 10% for 30-minute BW/FDR intervals and 2% for 15-minute BW/FDR intervals.     

Characterization of physicochemical properties of beryllium aerosols associated with prevalence of chronic beryllium disease

Little is known about the physicochemical properties of beryllium aerosols associated with increased risk of beryllium sensitization and chronic beryllium disease (CBD). Such information is needed to evaluate whether airborne mass of beryllium is the appropriate metric of exposure or alternatively to provide a scientific basis for using information on particle size, surface area, and chemistry to support an improved exposure limit based on bioavailability through the inhalation and dermal routes of exposure. Thus, we used a suite of analytical techniques to characterize aerodynamically size-fractionated beryllium particles and powders that have been associated in epidemiological studies with higher prevalence of CBD. Aerosol particles were sampled from the ventilation systems of production lines for powders of beryllium metal and beryllium oxide and for ingots of copper-beryllium alloy. End product powders from the metal and oxide production lines were also collected.Particles released during production of beryllium metal were found to be complex, having heterogeneous composition, including reactive species such as fluorine. Powders from beryllium metal production were of high purity with only a minor component of beryllium oxide. Both particles and powders from oxide production were high-purity oxide. Particles released during production of copper-beryllium alloy were heterogeneous, being predominantly copper oxides. Thus, all particles and powders contain at least some beryllium in the form of beryllium oxide.These data justify efforts to thoroughly characterize beryllium aerosol properties when performing exposure assessments. The data also suggest that differences in particle chemical composition, size, number, and surface area may influence bioavailability of beryllium and contribute to risk of CBD. However, a scientific basis does not yet exist to replace mass as the current metric of exposure.     

Predicted distributed state effects on enhanced biological phosphorus removal in a 5-stage Bardenpho wastewater treatment configuration.

Conventional wastewater treatment simulation programs use a "lumped" approach, where process rates are calculated using bulk concentrations of biomass and microbial storage products. A recently developed distributed, or agent-based, approach, where individual bacteria are modeled to account for their potentially variable hydraulic experiences, was applied to the 5-stage Bardenpho process, a type of enhanced biological phosphorus removal (EBPR) that includes internal recycle flows, which were hypothesized to affect distributed state development. Consistent with previous results, the EBPR predicted performance was worse according to the distributed approach than the lumped approach. In addition, increasing the internal recycle rate increased the anoxic reactor nitrate concentrations, tending to decrease EBPR performance. However, in the distributed approach, differences in the state distributions in internal recycle-linked reactors decreased with increasing recycle flow, tending to improve EBPR. These phenomena tend to have simultaneous and opposite effects on EBPR. The net effect will depend largely on the specific systems and the nitrate concentration in anoxic reactors.     

A study of diesel emissions on Drosophila

A sex-linked recessive lethal test was performed on male fruit flies of the species Drosophila melanogaster, (Oregon-R strain), exposed to an approximate five-fold dilution of exhaust from a diesel engine. The eight hour exposure was achieved by drawing diluted diesel exhaust from a three cubic meter stainless steel exposure chamber housing laboratory animals through a two liter reaction flask modified for use with Drosophila. A preconditioned sampling bag was used to collect the emissions after passing through the exposure chamber containing the flies. Results of analyses performed on the diesel exhaust mixture showed the following: carbon dioxide—0.17%, carbon monoxide—12.2 ppm, hydrocarbons—11.6 ppm, nitrogen oxide—3.8 ppm, nitrogen dioxide—2.9 ppm, sulphur dioxide—1.0 ppm, and particulates—2.18 mg/m³. Two broods of the F₂ generation were investigated for the occurrence of recessive lethal events. These broods approximated the developing gametogenic stages of mature sperm (P₁ matings on days 2 and 3 postexposure) and spermatocytes (P₁ matings on days 8 and 9). Additionally, the F₃ generation was evaluated for the occurrence of mosaic recessive lethal events which might escape detection in the F₂ generation. An equal number of F₂ and F₃ flies for both broods served as concurrent controls. Results indicate that, under the conditions tested, the diesel exhaust did not increase the mutation frequency of the exposed flies (F₂ rate = 0.30%, F₃ rate = 0%) when compared to the concurrent controls (F₂ rate = 0.37%, F₃ rate = 0.15%).