Biological Activity in a Heavily Organohalogen-Contaminated River Sediment (8 pp)

Background, Aims and Scope Sediments of the Spittelwasser creek are highly polluted with organic compounds and heavy metals due to the discharge of untreated waste waters from the industrial region of Bitterfeld-Wolfen, Germany over the course of more than one century. However, relatively few data have been published about the chloroorganic contamination of the sediment. This paper reports on the content of different (chloro)organic compounds with special emphasis on polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F), and chlorobenzenes. Existing concepts for the remediation of Spittelwasser sediment include the investigation of natural attenuation processes, which largely depend on the presence of an intact microbial food web. In order to gain more insight in terms of biological activity, we analyzed the capacity of sediment microflora to degrade organic matter by measuring the activities of extracellular hydrolytic enzymes involved in the biogeochemical cycling of carbon, nitrogen, phosphorus and sulfur. Furthermore, the detection of physiologically active bacteria in the sediment, particularly of those known for their capability to reductively dehalogenate organochlorine compounds, illustrates the potential for intrinsic bioremediation processes. Methods PCDD/F and chlorobenzenes were analyzed by gas chromatography(GC)/mass spectrometry and GC/flame ionization detection, respectively. The activities of hydrolytic enzymes were determined from freshly sampled sediment layers using 4-methylumbelliferyl (MUF) or 7-amino-4-methylcoumarin-conjugated model compounds and kinetic fluorescence measurements. Physiologically active bacteria from different sediment layers were microscopically visualized by fluorescence in situ hybridization (FISH). Specific bacteria were identified by 16S rRNA gene amplification and sequencing. Results and Discussion The PCDD/F congener profile was dominated by dibenzofurans. In addition, the presence of specific tetra and pentachlorinated dibenzofurans supported the assumption that extensive magnesium production was one possible source for the high contamination. A range of other chloroorganic compounds, including several isomers of chlorobenzenes, hexachlorocyclohexane and 1,1,1-trichloro-2,2-bis (p-chloro-phenyl)ethane (DDT), was present in the sediment. Activities of extracellular hydrolytic enzymes showed a strong decrease in those sediment layers that were characterized by high contents of absorbable organic halogen (AOX), indicating disturbed organic matter decay. Interestingly, an abnormal increase of cellulolytic enzyme activities below the organochlorine-rich layers was observed, possibly caused by residual cellulose from discharges of sulfite pulping wastes. FISH revealed physiologically active bacteria in most sediment layers from the surface down to the depth of about 60 cm, including members of Desulfitobacterium (D.) and Sulfurospirillum. The presence of D. dehalogenans was confirmed by its partial 16S rRNA gene sequence. Conclusions Results of chemical sediment analyses demonstrated high loads of organochlorine compounds, particularly of PCDD/F. Several years after stopping the waste water discharge to Spittelwasser creek, this sediment remains a main source for pollution of the downstream river system by way of the ongoing mobilization of sediment during high floods. As indicated by our enzyme activity measurements, the decomposition potential for organic matter is low in organochlorine-rich sediment layers. In contrast, the comparably higher enzyme activities in less organochlorine-polluted sediment layers as well as the presence of physiologically active bacteria suggest a considerable potential for natural attenuation. Recommendations and Perspectives From our data we strongly recommend to explore the degradative capacity of sediment microorganisms and the limits for in situ activity towards specific sediment pollutants in more detail. This will give a sound basis for the integration of bioremediation approaches into general concepts to reduce the risk that permanently radiates from this highly contaminated sediment. Submission Editor: Dr. Henner Hollert (Henner.Hollert@urz.uniheidelberg.de)     

Approaches to assess biocover performance on landfills

Methane emissions from active or closed landfills can be reduced by means of methane oxidation enhanced in properly designed landfill covers, known as “biocovers”. Biocovers usually consist of a coarse gas distribution layer to balance gas fluxes placed beneath an appropriate substrate layer. The application of such covers implies use of measurement methods and evaluation approaches, both during the planning stage and throughout the operation of biocovers in order to demonstrate their efficiency. Principally, various techniques, commonly used to monitor landfill surface emissions, can be applied to control biocovers. However, particularly when using engineered materials such as compost substrates, biocovers often feature several altered, specific properties when compared to conventional covers, e.g., respect to gas permeability, physical parameters including water retention capacity and texture, and methane oxidation activity. Therefore, existing measuring methods should be carefully evaluated or even modified prior to application on biocovers. This paper discusses possible strategies to be applied in monitoring biocover functionality. On the basis of experiences derived from investigations and large-scale field trials with compost biocovers in Austria, an assessment approach has been developed. A conceptual draft for monitoring biocover performance and recommendations for practical application are presented.     

Directions for hazardous waste storage and final disposal of treated hazardous waste (THW) in Austria

Austria produces about 700,000 tons of hazardous waste a year. Approximately 8% are sent to the incinerating facility EBS near Vienna. Approximately 60% THW (treated hazardous wastes) are finally disposed of. An unknown amount is sent to foreign countries for storage and landfilling.

By order of the Ministry of Agriculture and the Ministry of Public Health our institute elaborates guidelines for designing and operating final disposal hazardous waste facilities.

This paper deals with the fundamental aspects and the present state of these guidelines.     

Toxicity and bioaccumulation of thallium in Hyalella azteca, with comparison to other metals and prediction of environmental impact

Thallium (Tl) is an extremely toxic but little studied metal. For Hyalella azteca exposed in Lake Ontario water, a 25% reduction in survival (the LC25) occurred at about 48 nmol litre(-1) after 4 weeks. Body concentrations of Tl, which were proportional to water concentrations, averaged 290 nmol g(-1) dry mass at the LC25. Growth was reduced at slightly lower concentrations. Concentrations affecting reproduction were variable at < 50% of the LC25. On a water-concentration basis Tl was more toxic than Ni, Cu or Zn, but less toxic than Cd or Hg to Hyalella; toxicity to Pb was similar. On a body-concentration basis, the toxicities of Tl, Cd, Hg and Pb were all similar. Unlike Cd, Tl toxicity and uptake was affected by K concentrations in the water, and not by Ca, Mg, Na or other ions. Toxicity was proportional to uptake, and body concentrations were better predictors of toxicity than water concentrations in media with varying K concentrations. Preliminary measurements of Tl and Cd uptake by Hyalella from Hamilton Harbour and Lake Ontario sediments suggested that total bioavailable metal concentrations were greater in deep-water sediments from Lake Ontario than in sediments from the harbour. The ratio of bioavailable metal to the toxic threshold was slightly higher for Cd than for Tl, but well below 1 for both metals.     

Exploring Environmental Data in a Highly Immersive Virtual Reality Environment

Geography inherently fills a 3D space and yet we struggle with displaying geography using, primarily, 2D display devices. Virtual environments offer a more realistically-dimensioned display space and this is being realized in the expanding area of research on 3D Geographic Information Systems (GISs). Traditionally, a GIS has only limited tools for statistical analysis, and 3D GIS research has concentrated on the visualization of the geographical terrain. Here we discuss linking multivariate statistical graphics to geography in the highly immersive C2 virtual reality environment at Iowa State University using mid-Atlantic streams data.     

Management of municipal solid waste incineration residues

The management of residues from thermal waste treatment is an integral part of waste management systems. The primary goal of managing incineration residues is to prevent any impact on our health or environment caused by unacceptable particulate, gaseous and/or solute emissions. This paper provides insight into the most important measures for putting this requirement into practice. It also offers an overview of the factors and processes affecting these mitigating measures as well as the short- and long-term behavior of residues from thermal waste treatment under different scenarios. General conditions affecting the emission rate of salts and metals are shown as well as factors relevant to mitigating measures or sources of gaseous emissions.     

Mapping cumulative impacts of mining on sediment retention ecosystem service in an Australian mining region

Mining development can potentially lead to cumulative impacts on ecosystems and their services across a range of scales. Site-specific environmental impact assessments are commonly assessed for mining projects; however, large-scale cumulative impacts of multiple mines that aggregate and interact in resources regions have had little attention in the literature and there are few examples where regional-scale mining impacts have been assessed on ecosystem services. The objective of this study is to quantify regional-scale cumulative impacts of mining on sediment retention ecosystem services. We apply the sediment delivery ratio model of Integrated Valuation of Ecosystem Services and Trade-offs to calculate and map the sediment retention and export using a synthetic catchment model and a real case study under different mining scenarios in an Australian mining region. Two impact indices were created to quantify the cumulative impacts associated with a single mine and the interactions between multiple mines. The indices clarified the magnitude of impacts and the positive/negative impacts associated with regional-scale sediment retention and export. We found cumulative impacts associated with multiple mines’ interaction occurred but the influence of these interactions was relatively weak. This research demonstrated the potential for utilising ecosystem services modelling for the quantitative assessment of the cumulative impacts. Such research provide decision-makers and planners with a tool for sustainable regional and landscape planning that balances the needs of mining and the provision of ecosystem services.     

Large scale study on measurement of respiration activity (AT(4)) by Sapromat and OxiTop

In the run-up for amending the Austrian landfill ordinance, parameters were developed to assess the stability/reactivity of mechanically–biologically pretreated residual wastes. The Landfill Ordinance 2008 regulates limit values for Respiration Activity (=“Atmungsaktivität”) RA₄ (AT₄) < 7 mgO₂ * (g dry matter (DM))^?1, Gas Generation Sum GS₂₁ < 20 Nl * kg DM^?1 and alternatively Gas Evolution (=“Gasbildung”) GB₂₁ < 20 Nl * kg DM^?1. Methods for analysing these parameters were established by the Austrian Standards Institute (2004). As laboratory practice shows, these methods also are used for the assessment of other wastes (sewage sludge, commercial waste, material from abandoned sites, biowaste compost). For measurement of respiration activity in Austria mainly two methods are used: the Sapromat®-method and the OxiTop®-method. Whether respectively to what extent these two methods give same results, is discussed in this paper.Since 2009 at ABF-BOKU 169 respiration activity tests of samples taken from different stages of MBT – as well as biowaste composting processes, materials from landfills as well as abandoned sites and residues from anaerobic treatment plants were analysed parallel by Sapromat® and OxiTop®. The results manifest very strong correlation between the Sapromat® and OxiTop® method. The correlation coefficient is 0.993. As a very clear tendency OxiTop® gives lower amounts than Sapromat®. In average the lower values of OxiTop® are around 88%.