Formulation and Validation of an Empirical Moisture Damage Index

An empirical moisture damage index was developed in order to reduce the subjectivity of the estimation of moisture damage in domestic residences, in relation to occupant health. The database was generated using information gathered from a sample of 164 houses that were examined by civil engineers, and questionnaire data collected from the occupants. The index was formulated to associate with the occupant reported respiratory symptoms by calculating weighted estimates of selected moisture damage attributes using 80% of the sample. The remaining 20% of the sample was used to verify the final index. The index associated strongly with the health symptoms of interest. This index is a tool that may be used as an indicator of moisture damage induced exposure in domestic residences.     

Effect of fertilisation on the potassium and radiocaesium distribution in tree stands (Pinus sylvestris L.) and peat on a pine mire

This paper compares the effects of single and repeated fertilisation on the contents of potassium, 134Cs and 137Cs in different Scots pine compartments at different levels above ground and in the peat profile 9 years after the Chernobyl disaster. The material was collected from a ditch spacing and fertilisation experiment in Finland. Above a needle potassium concentration of 3.0 mg g(-1) in composed crown samples, 137Cs and 134Cs concentrations remained at about the same level but below that the values were higher on average. This potassium value corresponded to the potassium concentrations of 3.5-3.6 mg g(-1) in the current-year needles of two topmost whorls. The result indicates an enhanced radiocaesium uptake by pine trees under severe potassium deficiency. Fertilisation with potassium-containing fertilisers decreased the caesium uptake considerably. The inhibiting effect of fertilisation on caesium uptake by trees seemed to be fairly long lasting. Fertilisation had sped up the penetration of caesium downwards in the peat profile and its moving out of the active circulation of elements between soil and plants.     

Concentrations and diversity of microbes from four local bioaerosol emission sources in Finland

Microbial particles can readily be released into the air from different types of man-made sources such as waste operations. Microbiological emissions from different biological sources and their dispersion may be an issue of concern for area planning and for nearby residents. This study was designed to determine the concentrations and diversity of microbiological emissions from four different man-made source environments: waste center with composting windrows, sewage treatment plant, farming environment, and cattle manure spreading. Samples of airborne particles were collected onto polyvinyl chloride filters at three distances along the prevailing downwind direction, from each source environment during a period of approximately 1 week. These samples were analyzed for 13 species or assay groups of fungi, bacterial genus Streptomyces, and Gram-positive and -negative bacteria using quantitative polymerase chain reaction (PCR). Samples for determining the concentrations of viable fungi and bacteria were collected from all environments using a six-stage impactor. The results show that there were variations in the microbial diversity between the source environments. Specifically, composting was a major source for the fungal genera Aspergillus and Penicillium, particularly for Aspergillus fumigatus, and for the bacterial genus Streptomyces. Although the microbial concentrations in the sewage treatment plant area were significantly higher than those at 50 or 200 m distance from the plant area, in the farming environment or cattle manure spreading area, no significant difference was observed between different distances from the source. In summary, elevated concentrations of microbes that differ from background can only be detected within a few hundred meters from the source. This finding, reported earlier for culturable bacteria and fungi, could thus be confirmed using molecular methods that cover both culturable and nonculturable microbial material.     

Radionuclide migration in forest ecosystems--results of a model validation study

The primary objective of the IAEA's BIOMASS Forest Working Group (FWG) was to bring together experimental radioecologists and modellers to facilitate the exchange of information which could be used to improve our ability to understand and forecast radionuclide transfers within forests. This paper describes a blind model validation exercise which was conducted by the FWG to test nine models which members of the group had developed in response to the need to predict the fate of radiocaesium in forests in Europe after the Chernobyl accident. The outcomes and conclusions of this exercise are summarised. It was concluded that, as a group, the models are capable of providing an envelope of predictions which can be expected to enclose experimental data for radiocaesium contamination in forests over the time scale tested. However, the models are subject to varying degrees of conceptual uncertainty which gives rise to a very high degree of divergence between individual model predictions, particularly when forecasting edible mushroom contamination. Furthermore, the forecasting capability of the models over future decades currently remains untested.     

Achievements, difficulties and future challenges for the FARMING network

The EC FARMING network (Food and Agriculture Restoration Management Involving Networked Groups) was set up to bring together the many and diverse stakeholders who would be involved in intervention following wide scale radioactive contamination of the food chain, so that acceptable strategies can be developed for maintaining agricultural production and safe food supply. The network comprises stakeholder panels in the UK, Finland, Belgium, France and Greece that have met regularly since 2001 to debate, discuss and exchange opinion on the acceptability, constraints and impact of various countermeasure options and strategies. The objectives of this paper are to consolidate the main achievements of the FARMING project over the period 2000-2004, to highlight the various difficulties that were encountered and to discuss the challenges for engaging stakeholders in off-site emergency management and long-term rehabilitation in the future.     

Conversion of dissolved phosphorus in runoff by ferric sulfate to a form less available to algae: Field performance and cost assessment

Conversion of dissolved P by ferric sulfate into a particulate form sparingly available to algae was studied in 15 ditches in Finland using stand-alone dispensers for ferric sulfate administration. Ferric sulfate typically converted 60–70 % of dissolved P into iron-associated form, a process which required 250–650 kg per kg dissolved P. Mean cost was 160 EUR per kg P converted (range 20–400 EUR kg^?1). The costs were lowest at sites characterized by high dissolved P concentrations and small catchment area. At best, the treatment was efficient and cost-effective, but to limit the costs and the risks, ferric sulfate dispensers should only be installed in small critical source areas.     

Microbial secondary metabolites in school buildings inspected for moisture damage in Finland, The Netherlands and Spain

Secondary metabolites produced by fungi and bacteria are among the potential agents that contribute to adverse health effects observed in occupants of buildings affected by moisture damage, dampness and associated microbial growth. However, few attempts have been made to assess the occurrence of these compounds in relation to moisture damage and dampness in buildings. This study conducted in the context of the HITEA project (Health Effects of Indoor Pollutants: Integrating microbial, toxicological and epidemiological approaches) aimed at providing systematic information on the prevalence of microbial secondary metabolites in a large number of school buildings in three European countries, considering both buildings with and without moisture damage and/or dampness observations. In order to address the multitude and diversity of secondary metabolites a large number of more than 180 analytes was targeted in settled dust and surface swab samples using liquid chromatography/mass spectrometry (LC/MS) based methodology. While 42%, 58% and 44% of all samples collected in Spanish, Dutch and Finnish schools, respectively, were positive for at least one of the metabolites analyzed, frequency of detection for the individual microbial secondary metabolites - with the exceptions of emodin, certain enniatins and physcion - was low, typically in the range of and below 10% of positive samples. In total, 30 different fungal and bacterial secondary metabolites were found in the samples. Some differences in the metabolite profiles were observed between countries and between index and reference school buildings. A major finding in this study was that settled dust derived from moisture damaged, damp schools contained larger numbers of microbial secondary metabolites at higher levels compared to respective dust samples from schools not affected by moisture damage and dampness. This observation was true for schools in each of the three countries, but became statistically significant only when combining schools from all countries and thus increasing the sample number in the statistical analyses.     

Concentrations and Diversity of Microbes from Four Local Bioaerosol Emission Sources in Finland

ABSTRACT

Microbial particles can readily be released into the air from different types of man-made sources such as waste operations. Microbiological emissions from different biological sources and their dispersion may be an issue of concern for area planning and for nearby residents. This study was designed to determine the concentrations and diversity of microbiological emissions from four different man-made source environments: waste center with composting windrows, sewage treatment plant, farming environment, and cattle manure spreading. Samples of airborne particles were collected onto polyvinyl chloride filters at three distances along the prevailing downwind direction, from each source environment during a period of approximately 1 week. These samples were analyzed for 13 species or assay groups of fungi, bacterial genus Streptomyces, and Gram-positive and -negative bacteria using quantitative polymerase chain reaction (PCR). Samples for determining the concentrations of viable fungi and bacteria were collected from all environments using a six-stage impactor. The results show that there were variations in the microbial diversity between the source environments. Specifically, composting was a major source for the fungal genera Aspergillus and Penicillium, particularly for Aspergillus fumigatus, and for the bacterial genus Streptomyces. Although the microbial concentrations in the sewage treatment plant area were significantly higher than those at 50 or 200 m distance from the plant area, in the farming environment or cattle manure spreading area, no significant difference was observed between different distances from the source. In summary, elevated concentrations of microbes that differ from background can only be detected within a few hundred meters from the source. This finding, reported earlier for culturable bacteria and fungi, could thus be confirmed using molecular methods that cover both culturable and nonculturable microbial material.

IMPLICATIONS Concentrations and diversity of airborne microbes increase due to particle emissions from different biological waste treatment applications. However, these emissions cannot be separated from the background concentrations after more than a few hundred meters from the source. As part of a risk assessment, it may be necessary to confirm the behavior of microbial emissions from a specific source. Quantitative PCR is a useful tool for estimating total concentrations of different microbial species or groups as it detects both culturable and nonculturable microbial material.     

Analysis of Moisture Findings in the Interior Spaces of Finnish Housing Stock

ABSTRACT

A grading system was developed to rate the moisture damage profile of dwellings and to study the relationship between moisture-induced indoor air problems and occupant health. A total of 630 randomly selected houses and apartments, built between 1950 and 1989, were visually inspected. Moisture observations were standardized into three damage levels. Thus, a system to classify the homes into three grades was devised. The two grades of homes associated with the highest levels of damage were graded as index homes.

Overall, 51% of the sample had some kind of moisture fault in them and one in every three homes (33%) was classified as an index home. The mean number of damage incidents in the index dwellings varied from 1.4 to 2.6. The mean number of damage incidents in the reference homes was 0.28. Prevalence of index dwellings was significantly higher (p < 0.01) in houses (38%) than in apartments (26%). There was no major difference in the prevalence of index buildings in houses built in any particular decade (30-35%). Moisture was observed in 28% of bathrooms, in 10% of kitchens, and in 17% of other spaces. Indoor relative humidity (RH) levels were low in most homes.     

Quantitative PCR analysis of fungi and bacteria in building materials and comparison to culture-based analysis

Prolonged moisture on building materials can lead to microbial growth on them. Microbes can emit spores, metabolites and structural parts into the indoor air and thus, cause adverse health effects of people living and working in these buildings. So far, culture methods have been used for assessment of microbial contamination of building materials. In this work, we used quantitative PCR (qPCR) for the detection of selected fungal and bacterial groups in 184 building materials of different types and compared the results with culture-based analysis. Nine either commonly found species, genera or groups of fungi, or those considered as moisture damage indicators, and one bacterial genus, Streptomyces, were determined using qPCR. Fungi and mesophilic actinomycetes were also cultivated using standard media and conditions of the routine analysis. The bacterial genus Streptomyces and the fungal group Penicillium/Aspergillus/Paecilomyces were the most prevalent microbial groups in all building material types, followed by Stachybotrys chartarum and Trichoderma viride/atroviride/koningii. The highest prevalences, concentrations and species diversity was observed on wooden materials. In general, the results of the two methods did not correlate well, since concentrations of fungi and streptomycetes were higher and their occurrence more prevalent when determined by qPCR compared to culture-based results. However, with increasing concentrations, the correlation generally increased. The qPCR assay did not detect Aspergillus versicolor and Acremonium strictum as often as culture.