Uptake studies of environmentally hazardous (51)Cr in Mung beans

Attempt has been made to study the accumulation behaviour of a common plant, Mung bean (Vigna radiata) towards Cr(III) and Cr(VI) to have an insight on the migration and bio-magnification of Cr. For this purpose healthy germinated Mung bean seeds were sown in the sand in the presence of Hoagland's nutrient solution containing measured amount of K(2)(51)Cr(2)O(7) and (51)Cr(NO(3))(3).9H(2)O. Growth rate was also studied in the presence and absence of phosphate salts in the medium. It has been found that the transfer of chromium from soil to plant is significantly low (maximum 5% for both Cr(III) and Cr(VI)). Maximum accumulation of Cr occurs in the root with respect to the total chromium accumulation by the plant. Other parts of the Mung bean plant, e.g. cotyledons, shoot and leaves, show negligible accumulation. Therefore, the chance of direct intake of Cr through food as well as through the grazing animals to human body is less.     

Delivering Arsenic-free Drinking Water-Made Practically Possible: Continuous Scale Electrochemical Arsenic Remediation Process Furnished,based on Experimental Studies and ANN Simulation

Environment, Development and Sustainability - Arsenic (As) in groundwater has become a worldwide concern due to its high toxicity as it is classified as a potent carcinogen, when exposed to...     

Estimation of municipal solid waste generation and landfill area in Asian developing countries

In developing Asian countries, the municipal cooperations are unable to handle the increasing amount of municipal solid waste, which into the uncollected waste being spread on roads and in other public areas leading to tremendous pollution and destruction of land and negative impact on human health. Generation of municipal solid waste increases with the rapid urbanization and accelerated economic development with in the rapidly growing advanced technological societies. The nature of municipal solid waste is a term usually applied to a heterogeneous collection group of waste produced in urban areas, the nature of which varies from region to region. The common problem faced by all developing Asian countries, is the disposal of municipal solid waste and availability of land fill site area. Present study explains the correlation analysis of among different factors of municipal solid waste and the objective is to assess the future municipal solid waste stream in Asian developing countries. The other goal of this study was to calculate the future land area that would be required for landfill site disposal in Asian developing countries.     

Promoting Sustainability with Ecological, Economic and Social Dimensions in Developing Countries

Sustainable development is one of the most important ideas, and goals of our time. It is defined as ＂development which meets the needs and aspirations of the current generation and develops safe and sound society for future generation＂. Achieving sustainable development thus involves a vigorous and urgent debate on different dimensions. The different dimensions of sustainability as a framework involve all issues such as science, technology, economic growth and development, health, education, finance investment and trade, politics, natural disasters, population growth and terrorism, etc. No single dimension is responsible to develop sustainable society. This article mainly described the integrated relationship among the three dimensions ofsustainability.     

Toxicity mitigation and solidification of municipal solid waste incinerator fly ash using alkaline activated coal ash

Municipal solid waste (MSW) incineration is a common and effective practice to reduce the volume of solid waste in urban areas. However, the byproduct of this process is a fly ash (IFA), which contains large quantities of toxic contaminants. The purpose of this research study was to analyze the chemical, physical and mechanical behaviors resulting from the gradual introduction of IFA to an alkaline activated coal fly ash (CFA) matrix, as a mean of stabilizing the incinerator ash for use in industrial construction applications, where human exposure potential is limited. IFA and CFA were analyzed via X-ray fluorescence (XRF), X-ray diffraction (XRD) and Inductive coupled plasma (ICP) to obtain a full chemical analysis of the samples, its crystallographic characteristics and a detailed count of the eight heavy metals contemplated in US Title 40 of the Code of Federal Regulations (40 CFR). The particle size distribution of IFA and CFA was also recorded. EPA's Toxicity Characteristic Leaching Procedure (TCLP) was followed to monitor the leachability of the contaminants before and after the activation. Also images obtained via Scanning Electron Microscopy (SEM), before and after the activation, are presented. Concrete made from IFA, CFA and IFA-CFA mixes was subjected to a full mechanical characterization; tests include compressive strength, flexural strength, elastic modulus, Poisson's ratio and setting time. The leachable heavy metal contents (except for Se) were below the maximum allowable limits and in many cases even below the reporting limit. The leachable Chromium was reduced from 0.153 down to 0.0045 mg/L, Arsenic from 0.256 down to 0.132 mg/L, Selenium from 1.05 down to 0.29 mg/L, Silver from 0.011 down to .001 mg/L, Barium from 2.06 down to 0.314 mg/L and Mercury from 0.007 down to 0.001 mg/L. Although the leachable Cd exhibited an increase from 0.49 up to 0.805 mg/L and Pd from 0.002 up to 0.029 mg/L, these were well below the maximum limits of 1.00 and 5.00 mg/L, respectively.     

Promoting Sustainability with Ecological,Economic and Social Dimensions in Developing Countries

Abstract

Sustainable development is one of the most important ideas, and goals of our time. It is defined as “development which meets the needs and aspirations of the current generation and develops safe and sound society for future generation”. Achieving sustainable development thus involves a vigorous and urgent debate on different dimensions. The different dimensions of sustainability as a framework involve all issues such as science, technology, economic growth and development, health, education, finance investment and trade, politics, natural disasters, population growth and terrorism, etc. No single dimension is responsible to develop sustainable society. This article mainly described the integrated relationship among the three dimensions of sustainability.     

Health monitoring of bacterial concrete structure under dynamic loading using electro-mechanical impedance technique: a numerical approach

Environmental Science and Pollution Research - Health monitoring of structures using techniques based on the smart material is an innovative concept that is exploding technological revolutions in...     

Torque Production Using Hand Cranks in a Simulated Gear-Operated Valve Opening Task

Hand cranks are used in a variety of industries to actuate valves and in other gear-operated applications. In order to evaluate these types of operations and their compatibility with operator strength capabilities, a rotational dynamometer was used to measure torque production capability of operators using a hand crank at different heights and angles (with respect to the coronal plane). The tests were conducted for both clockwise and counterclockwise rotations using the dominant arm of each test participant. A total of 18 tests were completed by each of five male right-handed test participants. A 0° declination angle, counterclockwise operation, and both 40.65 cm and 60.96 cm heights were found to be associated with the greatest torque production capabilities.     

Torque Production Using Handwheels of Different Size During a Simulated Valve Operation Task

Opening and closing valves in industrial facilities often requires operators to use bars and wrenches as levers (cheaters) in order to overcome initial actuation forces. In order to determine more appropriate operational specifications, the maximum torque production capability was measured when 12 male participants used 4 different valve handwheels at 3 different heights and 2 different angles (in relationship to the coronal plane). The results indicate that the participants produced significantly greater torque when the largest of the 4 wheels (40.6 cm diameter) was used than when the medium (22.9 cm), small (20.3 cm), and handled (17.8 cm) handwheels were used. Although the main effect of heights was found to be statistically significant, post-hoc analyses between the heights found them to be, essentially, equal. In addition, the vertical and horizontal wheel orientations were not found to be different. The results are applicable to all industries where handwheels are used and applicable to valve manufacturers for designing operational torque specifications below the values found in this study.