TiO2–PANI/Cork composite: A new floating photocatalyst for the treatment of organic pollutants under sunlight irradiation

A novel photocatalyst based on TiO_2–PANI composite supported on small pieces of cork has been reported. It was prepared by simple impregnation method of the polyaniline(PANI)–modified TiO_2 on cork. The TiO_2–PANI/Cork catalyst shows the unique feature of floating on the water surface. The as-synthesized catalyst was characterized by X-ray diffraction(XRD),scanning electron micrograph(SEM), transmission electron microscopy(TEM), thermogravimetric analysis(TGA), Fourier transform infrared spectroscopy(FT-IR), UV–vis diffuse reflectance spectra(UV–vis DRS) and the Brunauer–Emmett–Teller(BET) surface area analysis. Characterization suggested the formation of anatase highly dispersed on the cork surface. The prepared floating photocatalyst showed high efficiency for the degradation of methyl orange dye and other organic pollutants under solar irradiation and constrained conditions, i.e., no-stirring and no-oxygenation. The TiO_2–PANI/Cork floating photocatalyst can be reused for at least four consecutive times without significant decrease of the degradation efficiency.     

Polyphenolic extracts from the xerophyte Rhamnus lycioides as a radiation biodosimeter

The majority of dosimeters currently in use are synthetic and very expensive. Therefore, the study of the dosimetric characteristics of polyphenolic extracts of xerophytes is useful because drought stress causes an increase in the production of these cheap and natural compounds containing benzene rings. Here, the polyphenolic compounds were extracted from Rhamnus lycioides which was collected from Bou-Hedma National Park in Tunisia and identified using liquid chromatography-mass spectrometry (LC-MS). We investigated the impact of cobalt-60 (60Co) irradiation (0–30 kilogray (kGy)) on the color parameters of polyphenolic extracts of R. lycioides using the Konica Minolta CR 300 portable colorimeter and UV–Visible spectroscopy. The structural and morphological characteristics of the irradiated extracts were assessed using Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD) technique and scanning electron microscopy (SEM). Overall, our results suggest that exposure to ionizing radiation (IR) of the polyphenolic components of the xerophyte R. lycioides has produced significant dose-dependent changes in their optical and morphological properties. Thus, these extracts can be valorized as biodosimeters in the dose range from 5 to 25 kGy.     

Trace element contamination in the mine-affected stream sediments of Oued Rarai in north-western Tunisia: a river basin scale assessment

Environmental Geochemistry and Health - High-quality and accurate environmental investigations are essential for the evaluation of contamination and subsequent decision-making processes. A...     

Copper and cadmium effects on growth and extracellular exudation of the marine toxic dinoflagellate Alexandrium catenella: 3D-fluorescence spectroscopy approach

In this study, metal contamination experiments were conducted to investigate the effects of copper and cadmium on the growth of the marine toxic dinoflagellate Alexandrium catenella and on the production of dissolved organic matter (Dissolved Organic Carbon: DOC; Fluorescent Dissolved Organic Matter: FDOM). This species was exposed to increasing concentrations of Cu²⁺ (9.93 × 10⁻¹⁰–1.00 × 10⁻⁷ M) or Cd²⁺ (1.30 × 10⁻⁸–4.38 × 10⁻⁷ M), to simulate polluted environments. The drastic effects were observed at pCu²⁺ = 7.96 (Cu²⁺: 1.08 × 10⁻⁸ M) and pCd²⁺ = 7.28 (Cd²⁺: 5.19 × 10⁻⁸ M), where cyst formation occurred. Lower levels of Cu²⁺ (pCu²⁺ > 9.00) and Cd²⁺ (pCd²⁺ > 7.28) had no effect on growth. However, when levels of Cu²⁺ and Cd²⁺ were beyond 10⁻⁷ M, the growth was totally inhibited. The DOC released per cell (DOC/Cell) was different depending on the exposure time and the metal contamination, with higher DOC/Cell values in response to Cu²⁺ and Cd²⁺, comparatively to the control. Samples were also analyzed by 3D-fluorescence spectroscopy, using the Parallel Factor Analysis (PARAFAC) algorithm to characterize the FDOM. The PARAFAC analytical treatment revealed four components (C1, C2, C3 and C4) that could be associated with two contributions: one, related to the biological activity; the other, linked to the decomposition of organic matter. The C1 component combined a tryptophan peak and a characteristic humic substances response, and the C2 component was considered as a tryptophan protein fluorophore. The C3 and C4 components were associated to marine organic matter production.     

Energy Analysis of Sugarcane Production in Morocco

An energy analysis of sugarcane production in small and large farms was made in Morocco. Total energy expenditures were 64.90 and 47.83 GJ/ha and energy outputs were 100.80 and 85.80 GJ/ha in large and small farms, respectively. The output/input energy ratios were 1.6 and 1.8. The energy intensity lies between 0.7 and 0.8 MJ/kg and is one of the highest among sugarcane producing countries. Irrigation is the most energy consuming operation with about 50% of total energy inputs. Electricity, fertilizers, fuel, and machinery are the main energy inputs. The influence of the different inputs is discussed and practical measures for energy saving and environmental conservation based on energy analysis are discussed.     

Agronomic application of olive mill wastewaters with phosphate rock in a semi-arid Mediterranean soil modifies the soil properties and decreases the extractable soil phosphorus

Olive mill wastewater (OMW), a by-product of the olive-mill industry, is produced in large amounts in Mediterranean countries. The presence of indigenous phosphate deposits in some countries like Tunisia provides an incentive for direct application or local chemical treatment at low cost to improve the solubility of low reactive phosphate rocks (PRs). The use of naturally occurring low-molecular weight organic acids (LMWOAs) that are present in OMW represents a new perspective in PR research and a possible solution for the recycling of the OMW. The present work was aimed at evaluating, under natural situations (field of olive trees), the effects of agronomic application of OMW (amounts applied: 30, 60 m(3) ha(-1)) with PR (amounts applied: 150 kg ha(-1)) on olive trees soil properties. We measured organic C, nitrogen (N), extractable phosphorus (P), exchangeable calcium (Ca), and exchangeable potassium (K), as well as other properties (pH and electrical conductivity). Our data provide evidence that agronomic application of OMW with PR has important effects on soil properties. Increases in organic C, total N, extractable P and exchangeable potassium (K) were found after the first agronomic application of OMW and PR. These increases were only temporary, following the second agronomic application of OMW and PR, significant reductions were detected in the extractable soil P (19.67 mg kg(-1) in the control soil vs. 8.99 mg kg(-1) in the amended soil). Changes in the extractable soil P could alter plant productivity and plant community structure because shifts in nutriment availability can affect the balance between limiting and non-limiting nutrients.