Breccias of the Adnet Formation: indicators of a Mid-Liassic tectonic event in the Northern Calcareous Alps (Salzburg/Austria)

Stratigraphy, lithology and depositional structures of Liassic red limestone-breccias of the Adnet Formation, including the 'Adnet Scheck', were studied at several outcrops of the Northern Calcareous Alps (NCA) south-east of Salzburg. A four-fold lithostratigraphic division is proposed for the Adnet Formation of the Osterhorn Mountains: the hemipelagic Schmiedwirt (Sinemurian) and Kehlbach (Carixian) members are separated from the pelagic Saubach Member (Toarcian) by a layer of amalgamated breccias (Scheck Member, probably Domerian to early Toarcian). Several other breccia beds occur locally from the base of the Kehlbach Member up to the lower Saubach Member. Although the sediments overlying the Scheck Member breccias are of coeval age, the ages of the underlying strata are very different. This can be explained by submarine Liassic erosion during a period of resedimentation from the middle Carixian until the early Toarcian. At least 10–15?m of partly lithified sediments were eroded by gravity flows. The entire Kehlbach Member and up to two-thirds of the Schmiedwirt Member were removed at Adnet. The breccias originated from submarine debris flows. Repeated flows over a long period and the depositional setting exclude a triggering by sea-level fluctuations. Most probably they arose from tectonically triggered slumps and slides of superficial sediments. The 'Scheck' was initiated on the steep upper slope of the drowned Triassic Adnet reef and flowed to the north-east.The Pliensbachian to early Toarcian period of tectonic activity indicated by the breccias was the most important during the Liassic in the Osterhorn Mountains and other parts of the NCA. From the large-scale regional distribution of the breccias and in accord with published data, a roughly north-east trending strike-slip fault zone is proposed, crossing the NCA south of the Osterhorn block, with a peaking activity during the Pliensbachian to early Toarcian as the cause of the tectonic movements.     

A high-resolution historical sediment record of nutrients,trace elements and organochlorines (DDT and PCB) deposition in a drinking water reservoir (Lake Brêt,Switzerland) points at local and regional pollutant sources

The ¹³⁷Cs and ²¹⁰Pb dating of a 61-cm long sediment core retrieved from a drinking water reservoir (Lake Brêt) located in Switzerland revealed a linear and relatively high sedimentation rate (～1 cm year^?1) over the last decades. The continuous centimeter scale measurement of physical (porewater and granulometry), organic (C_org, P, N, HI and OI indexes) and mineral (C_min and lithogenic trace elements) parameters therefore enables reconstructing the environmental history of the lake and anthropogenic pollutant input (trace metals, DDT and PCBs) at high resolution. A major change in the physical properties of the lowermost sediments occurred following the artificial rise of the dam in 1922. After ca. 1940, there was a long-term up-core increase in organic matter deposition attributed to enhance primary production and anoxic bottom water conditions due to excessive nutrient input from a watershed predominantly used for agriculture that also received domestic effluents of two wastewater-treatment plants. This pattern contrasts with the terrigenous element input (Eu, Sc, Mg, Ti, Al, and Fe) which doubled after the rising of the dam but continuously decreased during the last 60 years. By comparison, the trace metals (Cu, Pb and Hg) presented a slight enrichment factor (EF) only during the second part of the 20th century. Although maximum EF Pb (>2) occurred synchronously with the use of leaded gasoline in Switzerland (between ca. 1947 and 1985) the Hg and Cu profiles exhibited a relatively similar trend than Pb during the 20th century, therefore excluding the alkyl-lead added to petrol as the dominant (atmospheric) source of lead input to Lake Brêt. Conversely, the Cu profile that did not follow the decrease registered in Pb and Hg during the last 10 years, suggests an additional source of Cu probably linked to the impact of agricultural activities in the area. In absence of heavy industries in the catchment, the atmospheric deposition of DDT and PCBs via surface runoff followed the historical emissions of POPs in Switzerland. Such result highlights the regional contamination of freshwater resources by the large-scale emission of toxic industrial chemicals in the 1960s and 1970s as well as the efficiency of the regulatory measures subsequently taken.     

Cadmium concentration in tobacco (Nicotiana tabacum L.) from different countries and its relationship with other elements

Cadmium accumulation in crop plants, such as tobacco (Nicotiana tabacum L.), can lead to human exposure to this carcinogenic metal. To better define actual Cd distribution in cured or processed tobacco leaves from chief tobacco-producing regions, we analyzed 755 leaf samples of three major types (Flue-cured, Burley, and Oriental) obtained from 13 countries during 2001-2003. This survey may help identify regions with low- or high-Cd concentrations in tobacco to obtain insight into the cause of the concentration extremes and to assist in defining strategies to reduce Cd in tobacco. Cadmium concentrations in the samples ranged from 0 to 6.78 microg g(-1), as determined by ICP-MS. Significant differences were found among types and among countries, but significant interactions between type and country were found. Variations in Cd concentrations were also found in all countries. Our results suggest an important contribution of the field (e.g., bioavailable Cd in soil, other soil characteristics) to the Cd concentration in tobacco. Finally, the correlation between the concentration of Cd and that of other elements differed among the types, which could be effectively discriminated based on the concentrations of 20 elements.     

Material and chemical composition of municipal solid waste incineration bottom ash fractions with different densities

Journal of Material Cycles and Waste Management - Bottom ash is the main solid residue from municipal solid waste incineration (MSWI). The material can be utilised in the construction industry but...     

Aerogels and metal–organic frameworks for environmental remediation and energy production

Environmental pollution and climate change are requiring new methods to clean pollutants and produce sustainable energy. Aerogels and metal organic frameworks are emerging as advanced porous materials with higher functionality, high surface area, high porosity and flexible chemistry. Aerogels are dried gels prepared using the sol–gel procedure, whereas metal organic frameworks are networks of organic ligands and metal ions connected by coordination bonds. Applications of aerogels include the removal of heavy metals, CO₂ capture and reduction, photodegradation of pollutants, air cleanup and water splitting. This article reviews the synthesis and types of aerogels and metal organic frameworks, and the application to pollutant removal, energy production including hydrogen, methane reforming, CO₂ conversion and NOx removal.     

Byproduct production of minor metals: Threat or opportunity for the development of clean technologies? The PV sector as an illustration

Today, the fight against global warming and the coming hydrocarbon exhaustion involve a drastic increase of clean energies. These technologies resort to many minor metals which are byproduct of major metals. We will take the definition of Hagelüken and Mesker (2010, Complex Life Cycles of Precious and Special Metals. In: Edition Thomas E. Graedel, Ester van der Voet (Eds.), Strüngmann Forum Report, Linkages of Sustainability, MIT Press) to show precisely what minor metals are: “[they are] metals that have relatively low production or usage, which occur in low ore concentrations, are regarded as rare, or are not traded at major public exchanges”. We will analyze the byproduct status affecting almost each minor metal in order to determine if the link with the metal main product can involve a threat for clean technology development. This paper will also deal with the theory and implications of the relationship between the byproduct and the main-product and then check it with empirical data. Until now, byproduct metal production and its variations seem relatively independent from major metal production thanks to the non-saturation of potential supply. By 2050, photovoltaic solar development should not lead to the saturation of potential supply.     

Root plasticity buffers competition among plants: theory meets experimental data

Morphological plasticity is a striking characteristic of plants in natural communities. In the context of foraging behavior particularly, root plasticity has been documented for numerous species. Root plasticity is known to mitigate competitive interactions by reducing the overlap of the individuals' rhizospheres. But despite its obvious effect on resource acquisition, plasticity has been generally neglected in previous empirical and theoretical studies estimating interaction intensity among plants. In this study, we developed a semi-mechanistic model that addresses this shortcoming by introducing the idea of compensatory growth into the classical-zone-of influence (ZOI) and field-of-neighborhood (FON) approaches. The model parameters describing the belowground plastic sphere of influence (PSI) were parameterized using data from an accompanying field experiment. Measurements of the uptake of a stable nutrient analogue at distinct distances to the neighboring plants showed that the study species responded plastically to belowground competition by avoiding overlap of individuals' rhizospheres. An unexpected finding was that the sphere of influence of the study species Bromus hordeaceus could be best described by a unimodal function of distance to the plant's center and not with a continuously decreasing function as commonly assumed. We employed the parameterized model to investigate the interplay between plasticity and two other important factors determining the intensity of competitive interactions: overall plant density and the distribution of individuals in space. The simulation results confirm that the reduction of competition intensity due to morphological plasticity strongly depends on the spatial structure of the competitive environment. We advocate the use of semi-mechanistic simulations that explicitly consider morphological plasticity to improve our mechanistic understanding of plant interactions.     

Correlation of six anthropogenic markers in wastewater, surface water, bank filtrate, and soil aquifer treatment

Six trace contaminants (acesulfame (ACE), sucralose (SUC), carbamazepine (CBZ), diatrizoic acid (DTA), 1H-benzotriazole (BTZ) and its 4-methyl analogue (4-TTri)) were traced from wastewater treatment plants (WWTPs) to receiving waters and further to riverbank filtration (RBF) wells to evaluate their prediction power as potential wastewater markers. Furthermore, the persistence of some compounds was investigated in advanced wastewater treatment by soil aquifer treatment (SAT). During wastewater treatment in four conventional activated sludge WWTPs ACE, SUC, and CBZ showed a pronounced stability expressed by stable concentration ratios in influent (in) and effluent (out) (ACE/CBZ: in45, out40; SUC/CBZ: in1.8, out1.7; and ACE/SUC: in24, out24). In a fifth WWTP, additional treatment with powdered activated carbon led to a strong elimination of CBZ, BTZ, and 4-TTri of about 80% and consequently to a distinctive shift of their ratios with unaffected compounds. Data from a seven month monitoring program at seven sampling locations at the rivers Rhine and Main in Germany revealed the best concentration correlation for ACE and CBZ (r(2) = 0.94) and also a good correlation of ACE and CBZ concentrations to BTZ and 4-TTri levels (r(2) = 0.66 to 0.82). The comparison of ratios at different sampling sites allowed for the identification of a CBZ point source. Furthermore, in Switzerland a higher consumption of SUC compared to Germany can be assumed, as a steadily increasing ACE/SUC ratio along the river Rhine was observed. In RBF wells a good correlation (r(2) = 0.85) was again observed for ACE and CBZ. Both also showed the highest stability at a prolonged residence time in the subsurface of a SAT field. In the most peripheral wells ACE and CBZ were still detected with mean values higher than 36 μg L(-1) and 1.3 μg L(-1), respectively. Although SUC concentrations in wastewater used for SAT decreased by more than 80% from about 18 μg L(-1) to 2.1 μg L(-1) and 3.5 μg L(-1) in these outlying wells, the compound was still adequate to indicate a wastewater impact in a qualitative way.     

Medikamentenentsorgung in privaten Haushalten: Ein Faktor bei der Gewässerbelastung mit Arzneimittelwirkstoffen?

Background

Residues of pharmaceuticals are meanwhile detected widely in the aquatic environment. Waste water treatment plants are the main route of entry: after intake the agents or their metabolites are excreted predominantly via urine into the sewage. Largely unknown is, however, if the improper disposal of unused medicines via domestic sanitary devices (toilet or sink) contributes to the measured concentrations in the environment. Aim of this investigation was to clarify to what extent consumers in Germany dispose of unused medicines directly via domestic sewage. In July and August 2006 a representative survey of the population with 2.000 interviewees was performed for this purpose.

Results

The analysis of the survey shows that the disposal of unused medicines via domestic sewage takes place on relevant scales: approx. 16% of the population dispose at least occasionally of unused or expired tablets in the toilet whereas 43% proceed alike with liquid drugs (toilet or sink).

Discussion

A possible reason for this disposal behaviour is the widely inconsistent waste disposal communication by the municipalities and the federal states. The resulting uncertainty about the correct way to dispose of unused medicines gains in importance in the context of the high recycling willingness of the (German) population: appropriate disposal options for drug residues (tablets or liquids) arising from waste separation are often not realised.

Conclusions

Quantitative assessments on the basis of the collected data demonstrate that the established frequency of direct disposal of unused medicines via domestic sewage can partly contribute significantly to the occurrence of pharmaceuticals in the aquatic environment. Crucial parameters are here the excretion rate of the active pharmaceutical ingredient considered and the actual amount of medication waste.

Recommendations

Based on the inquiry results, measures that lead to a more adequate handling of pharmaceutical waste disposal are demanded. The establishment of a consistent and binding disposal standard for unused medicines via return in pharmacies is recommended. This measure needs to be accompanied by a simplification of the established take back systems which partly cause high time and effort for pharmacies.