Ultrasonographic features in a case of heterozygous achondroplasia at 25 weeks' gestation

Prenatal diagnosis of heterozygous achondroplasia at 25 weeks is described. First-level fetal ultrasonography demonstrated short long bones of the lower limbs. Second-level examination showed a large head; shortened femur, fibula, and tibia; a ‘trident’-shaped hand; and an abnormal facial profile.     

Source apportionment of PAHs and n-alkanes bound to PM1 collected near the Venice highway

n-Alkanes and polycyclic aromatic hydrocarbons (PAHs) bound to atmospheric particulate matter (PM₁) were investigated in a traffic site located in an urban area of Venice Province (Eastern Po Valley, Italy) during the cold season. Considering the critical situation affecting the Veneto Region concerning the atmospheric pollution and the general lack of information on PM₁ composition and emission in this area, this experimental study aims at determining the source profile, their relative contributions and the dispersion of finer particles. Four sources were identified and quantified using the Positive Matrix Factorization receptor model: (1) mixed combustions related to the residential activities, (2) agricultural biomass burning in addition to the resuspension of anthropogenic and natural debris carried by the wind, (3) gasoline and (4) diesel traffic-related combustions. The role of local atmospheric circulation was also investigated to identify the pollutant sources.     

Double Green Process: a low environmental impact method for recycling of CdTe,a-Si and CIS/CIGS thin-film photovoltaic modules

On the basis of the method for managing the end of life of CdTe photovoltaic panels previously proposed by the authors, a new method for the recycling of all types of thin-film panels (CdTe, a-Si and CIS/CIGS) has been developed and optimised under a research project founded by Enel Foundation and CRUI Foundation. The DGP process has been developed through a feasibility study carried out from three points of view: technical, environmental and economic. The process is composed by two sub-processes matched to each other, one suitable for CdTe panels (named DGPa) and the other one for a-Si and CIS/CIGS panels (DGPb). The Double Green Panel process is based mainly on mechanical treatments with a minimum use of chemicals and it is characterised by a greater level of automation and a high flexibility in production capacity. The potential environmental impacts of various configurations of the DGP process have been extensively analysed with LCA tool in order to develop an environmentally friendly process. The economic feasibility has been assessed through the Discounted Cash Flow Analysis (DCFA) method. The revenues associated to the recovery of valuable and common materials and the recycling costs have been taken into account.     

A straightforward synthesis in aqueous medium of enantiomerically enriched S(-)2,2′-dihydroxy-1,1′-binaphthyl

Chiral, atropisomeric 2,2'-dihydroxy-1,1'-binaphthyl has been extensively used to direct asymmetric processes. Its key role in asymmetric catalysis has spurred efforts to synthesize it in the optically pure form, but the reported synthetic routes have a significant environmental impact. In an aqueous peroxydase-cyclodextrin system the oxidative coupling of 2-naphthol took place very rapidly in almost quantitative yield and resulted in an enantiomeric excess. This one-pot synthesis do not require any organic solvents and oxidising metal cations.     

The combination of oxalic acid with power ultrasound fully degrades chrysotile asbestos fibres

The simultaneous action of power ultrasound and oxalic acid, as a chelating agent, rapidly converts chrysotile asbestos into water soluble material and a non-asbestos debris, not classifiable as hazardous under worldwide safety regulations.     

Microbiological aspects of humid husk composting

The feasibility of composting as disposal practice of husk mixed with olive mill wastewaters (OMW) was studied in the present research. The process was investigated with regards to some reliable and easy to be determined microbial activity parameters such as the ATP content, the activity of a pool of enzymes and the viable counts, keeping in mind the well known bias of this last technique. Two different composting technologies were compared: static pile and reactor by studying the cured composts obtained. Among the bioindicators tested, the composting process trend was described better by the ATP content and the activity of some enzymes. In fact, the ATP content showed an increase during the thermophilic phase in both the pile and the reactor, and decreased at the end of the process, it was also higher in the bioreactor-pile technology than in the pile. With regard to the enzymatic activity, with the reactor technology experiment, two peaks were evidenced in the thermophilic phase and during the curing phase in pile, and a drop during the transfer of material from the reactor to the pile. The quality of the cured product obtained using the reactor technology has been evaluated considering phytoxicity and hygienic features: the stabilised compost resulted to have neither phytoxical effect, nor faecal indicator contaminants.     

Oxidative degradation of chlorophenol derivatives promoted by microwaves or power ultrasound: a mechanism investigation

Background, aim, and scope

Phenols are the most common pollutants in industrial wastewaters (particularly from oil refineries, resin manufacture, and coal processing). In the last two decades, it has become common knowledge that they can be effectively destroyed by nonconventional techniques such as power ultrasound (US) and/or microwave (MW) irradiation. Both techniques may strongly promote advanced oxidation processes (AOPs). The present study aimed to shed light on the effect and mechanism of US- and MW-promoted oxidative degradation of chlorophenols; 2,4-dichlorophenoxyacetic acid (2,4-D), a pesticide widespread in the environment, was chosen as the model compound.

Materials and methods

2,4-D degradation by AOPs was carried out either under US (20 and 300 kHz) in aqueous solutions (with and without the addition of Fenton reagent) or solvent-free under MW with sodium percarbonate (SPC). All these reactions were monitored by gas chromatography–mass spectrometry (GC–MS) analysis and compared with the classical Fenton reaction in water under magnetic stirring. The same set of treatments was also applied to 2,4-dichlorophenol (2,4-DCP) and phenol, the first two products that occur a step down in the degradation sequence. Fenton and Fenton-like reagents were employed at the lowest active concentration.

Results

The effects of US and MW irradiation were investigated and compared with those of conventional treatments. Detailed mechanisms of Fenton-type reactions were suggested for 2,4-D, 2,4-DCP, and phenol, underlining the principal degradation products identified. MW-promoted degradation under solvent-free conditions with solid Fenton-like reagents (viz. SPC) is extremely efficient and mainly follows pyrolytic pathways. Power US strongly accelerates the degradation of 2,4-D in water through a rapid generation of highly reactive radicals; it does not lead to the formation of more toxic dimers.

Discussion

We show that US and MW enhance the oxidative degradation of 2,4-D and that a considerable saving of oxidants and cutting down of reaction times is thereby achieved. The results support the interpretation of previously published data and improve the understanding of the factors of direct degradation along different pathways.

Conclusions

Oxidative pathways for 2,4-D, 2,4-DCP, and phenol were proposed by a careful monitoring of the reactions and detection of intermediates by GC–MS.

Recommendations and perspectives

The understanding of the factors that affect chlorophenols degradation along different pathways may facilitate the optimization of the treatment. Type of energy source (US or MW), power, and frequency to be applied could be designed in function of the operative scenario (amount of pollutant in soil, water, or oils).     

Concentrations of U,U, U,Th, Th,Th, Ra,Ra, Ra,Po, Pb and Pb in drinking water in Italy: reconciling safety standards based on measurements of gross α and β

Some important naturally occurring α- and β-radionuclides in drinking water samples collected in Italy were determined and the radiological quality evaluated. The mean activity concentrations (mBq L⁻¹) of the radionuclides in the water samples were almost in the order: 26 ± 36 (²³⁴U) > 21 ± 30 (²³⁸U) > 8.9 ± 15 (²²⁶Ra) > 4.8 ± 6.3 (²²⁸Ra) > 4.0 ± 4.1 (²¹⁰Pb) > 3.2 ± 3.7 (²¹⁰Po) > 2.7 ± 1.2 (²¹²Pb) > 1.4 ± 1.8 (²²⁴Ra) > 1.1 ± 1.3 (²³⁵U) > 0.26 ± 0.39 (²²⁸Th) > 0.0023 ± 0.0009 (²³⁰Th) > 0.0013 ± 0.0006 (²³²Th). The mean estimated dose (μSv yr⁻¹) to an adult from the water intake was in this order: 2.8 ± 3.3 (²¹⁰Po) > 2.4 ± 3.2 (²²⁸Ra) > 2.1 ± 2.1 (²¹⁰Pb) > 1.8 ± 3.1 (²²⁶Ra) > 0.94 ± 1.30 (²³⁴U) > 0.70 ± 0.98 (²³⁸U) > 0.069 ± 0.087 (²²⁴Ra) > 0.036 ± 0.044 (²³⁵U) > 0.014 ± 0.021 (²²⁸Th) > 0.012 ± 0.005 (²¹²Pb) > 0.00035 ± 0.00029 (²³⁰Th) > 0.00022 ± 0.00009 (²³²Th). It is obvious that ²¹⁰Po, ²²⁸Ra, ²¹⁰Pb and ²²⁶Ra are the most important dose contributors in the drinking water intake. As far as the seventeen brands of analysed drinking water were concerned, the committed effective doses were in the range of 2.81–38.5 μSv yr⁻¹, all well below the reference level of the committed effective dose (100 μSv yr⁻¹) recommended by the WHO. These data throw some light on the scale of the radiological impact on the public from some naturally occurring radionuclides in drinking water, and can also serve as a comparison for the dose contribution from artificial radionuclides released to the environment as a result of human practices. Based on the radionuclide composition in the analysed waters, comment was made on the new screening level for gross α activity in guidelines for drinking-water quality recommended by the WHO, 2004.     

Evaluation of the field dissipation of fungicides and insecticides used on fruit bearing trees in northern Italy

The dissipation of the fungicides captan, cyprodinil, fludioxonil, dithianon, and tebuconazole and of the insecticides chlorpyrifos, fenitrothion, and malathion was studied, following a single treatment of different cultivars of pears, apples, and peaches. The study was conducted in northern Italy, over two successive growing seasons (2004 and 2005). The treatments were performed by the farmers involved, in line with their usual practice. At various time intervals from treatment to harvest, representative samples of fruit were collected and analyzed for pesticide residues. In some cases, concentrations lower than the maximum residue levels (MRLs) were found immediately after treatment. In all trials a rapid decline in pesticide concentrations was observed leading to residues at harvest greatly below the MRLs.