Electrooxidation of industrial wastewater containing 1,4-dioxane in the presence of different salts

The treatment of 1,4-dioxane solution by electrochemical oxidation on boron-doped diamond was studied using a central composite design and the response surface methodology to investigate the use of SO₄ ^2? and HCO₃ ^? as supporting electrolytes considering the applied electric current, initial chemical oxygen demand (COD) value, and treatment time. Two industrial effluents containing bicarbonate alkalinity, one just carrying 1,4-dioxane (S1), and another one including 1,4-dioxane and 2-methyl-1,3-dioxolane (S2), were treated under optimized conditions and subsequently subjected to biodegradability assays with a Pseudomonas putida culture. Electrooxidation was compared with ozone oxidation (O₃) and its combination with hydrogen peroxide (O₃/H₂O₂). Regarding the experimental design, the optimal compromise for maximum COD removal at minimum energy consumption was shown at the maximum tested concentrations of SO₄ ^2? and HCO₃ ^? (41.6 and 32.8 mEq L^?1, respectively) and the maximum selected initial COD (750 mg L^?1), applying a current density of 11.9 mA cm^?2 for 3.8 h. Up to 98 % of the COD was removed in the electrooxidation treatment of S1 effluent using 114 kWh per kg of removed COD and about 91 % of the COD from S2 wastewater applying 49 kWh per kg of removed COD. The optimal biodegradability enhancement was achieved after 1 h of electrooxidation treatment. In comparison with O₃ and O₃/H₂O₂ alternatives, electrochemical oxidation achieved the fastest degradation rate per oxidant consumption unit, and it also resulted to be the most economical treatment in terms of energy consumption and price per unit of removed COD.     

Can the environmental health of urban centers be assessed through pollutants trapped in lakes? A study case in the biggest city of the southern hemisphere

Environmental Science and Pollution Research - Air and water quality in urban centers are summited to pollution from different sources, such as industrial activities, traffic, and wastewater...     

A new Dasypodini armadillo (Xenarthra: Cingulata) from San Gregorio Formation,Pliocene of Venezuela: affinities and biogeographic interpretations

We describe Pliodasypus vergelianus gen. et sp. nov., a Dasypodini armadillo from the middle Pliocene of Venezuela (Vergel Member, San Gregorio Formation). Although scarce, the remains are remarkable because of their geochronologic proximity to the main phase of Great American Biotic Interchange (GABI). The cladistic analysis conducted reveals that Pliodasypus groups with Dasypus and both are sister taxa of Propraopus, whereas Anadasypus is at a basal position. With respect to the records of tribe Dasypodini, after its oldest representative (Anadasypus, middle and late Miocene), the chronologically subsequent form is Pl. vergelianus (middle Pliocene), followed by Dasypus bellus in higher northern latitudes (late Pliocene), and then by widespread occurrences in the Pleistocene of North America (D. bellus) and South America (Propraopus, Dasypus punctatus, and Dasypus novemcinctus). Thus, we infer that Dasypus differentiated in the late Pliocene at low latitudes in the northern South America. It leads to two alternative hypotheses of dispersal: (a) some early Dasypus remained cryptically in South America until the Pleistocene, whereas others dispersed to North America between 2.2 and 2.7 Ma, or (b) they dispersed to North America subsequently to the emersion of the Panamanian isthmus and D. bellus differentiated there; later, during the Pleistocene, D. bellus entered South America and experienced speciation. The same process of re-ingression has been proposed to other xenarthrans, breaking with the traditional assumption that the GABI was unidirectional.     

Analysis of two schemes using micro hydroelectric power (MHPs) in the Amazon with environmental sustainability and energy and economic feasibility

A major problem for sustainable development in the Amazon is the difficulty of supplying electric power to isolated communities, which represent a considerable share of the population. This problem has been a major obstacle to productive activities (especially extractive and agricultural) in such communities, thus significantly contributing to rural drift and creating social problems in larger cities. In that case, one way to supply electric power would be to use the huge network of small rivers in the region by implementing Micro Hydroelectric Power Plants (MHPs). However, this type of hydropower project requires a set of technical assessments in order to obtain better value for its cost-effectiveness from the perspective of sustainable development. Thus, based on a survey of energy demand and the local hydrological and topographical characteristics, two possible MHP designs for the hydrological site under analysis were suggested. Assessments of hydropower, economic and environmental aspects were developed. MHP designs were compared with the diesel generator design of the community under focus. Comparison showed that the MHP designs are feasible in terms of energy to meet local demand; economically, they are more feasible than the diesel generator and are environmentally sustainable, mainly because such designs involve low-head, run-of-river MHPs and the flooded areas were simulated and are not larger than 0.02 km². Therefore, the information provided by these assessments constitutes important data, serving as subsidies for MHP implementation projects, which shall contribute to sustainable development in the region.     

Effects of golpar (<Emphasis Type="Italic">Heracleum persicum</Emphasis> Desf.) and probiotics in drinking water on performance,carcass characteristics,organ weights,blood plasma constituents,and immunity of broilers

Increasing levels of Heracleum persicum (golpar) in drinking water were studied in broilers. Two hundred and forty-one-day-old male chickens were allocated to one of six treatments: control, without added phytogenics nor probiotics in drinking water, and probiotics at recommended manufacturer’s level (P) or 1.0, 1.5, 2.0, and 2.5 ml/l of golpar extract solution (G1, G1.5, G2, and G2.5 treatments, respectively) in drinking water. As a result of this study, no linear or quadratic trends in the feed intake (FI) and feed conversion rate (FCR) due to golpar supplementation were found. Body weight gain, final body weight, and relative carcass weight showed a positive linear response with increasing levels of golpar supplementation. Neither golpar nor probiotics had effects on the percentages of edible parts of the carcass. Golpar supplementation levels caused a linear negative response of the albumin content in blood plasma, whereas both abdominal fat as percentage of carcass weight and uric acid levels in blood plasma linearly increased. The effects on Ig responses were only observed at 42 days of age and were similar in probiotics and the highest level of golpar supplementation. Based on our results, both probiotics and golpar supplementation could improve broiler performance and immune function.     

Distribution of long-lived radionuclides of the 238U series in the sediments of a small river in a uranium mineralized region of Spain

A study is presented on the distribution and mobilization of the natural U isotopes (238U and 234U), 230Th, and 226Ra in the sediments of a small river crossing an uranium mineralized zone where a disused uranium mine is located. Due to the preferential directions for surface run-off waters and to the mine's situation, one sampling point along the river bed was identified as a point of accumulation of radionuclides. The average values of the activity concentrations (Bq/kg) in this sediment sample were 5,025, 5,055, 5,915 and 1,694 for 238U, 234U, 230Th and 226Ra, respectively, while the respective average values of the activity concentrations (Bq/kg) for the sediment sample considered to give the background level were 125, 124, 131 and 370. Isotopic ratios between the descendants of 238U served to clarify some paths of distribution, involving the soils nearest to the sampling points and the location of these points with respect to the disused mine. The differences in behaviour found between the uranium, thorium and radium isotopes were associated to the mobility of these radionuclides in the fluvial system studied. Correlations between the radionuclide activity concentration ratios and stable element concentrations in the sediment samples were also investigated.     

Soil-to-plant transfer factors for natural radionuclides and stable elements in a Mediterranean area

The transfer factors (TF) for natural uranium isotopes (238U and 234U), thorium isotopes (232Th, 230Th and 228Th), and 226Ra were obtained in plant samples (grass-pasture) growing in granitic and alluvial soils around a disused uranium mine located in the Extremadura region in the south-west of Spain. Affected and non-affected areas of the mine presented large differences in the activity concentrations of radionuclides of the uranium series. We also determined transfer factors for several stable elements (essential and non-essential). A set of statistical tests were applied to validate the data. The results showed that the transfer factors for both the natural radionuclides and the stable elements are independent of the two substrate types involved and also of the two areas considered in the study.     

Solar photocatalytic mineralization of commercial pesticides: acrinathrin

A comparative study of the degradation of commercial acrinathrin spiked in water using TiO2 photocatalysis and photolysis under sunlight was performed. Samples were analysed by liquid chromatography-diode array detector (HPLC-DAD) and gas chromatography-ion trap-mass spectrometric detector (GC-ITMS). Additional total organic carbon (TOC) analyses were carried out to evaluate the mineralisation rates. One photoproduct, 2-phenoxy benzaldehyde, was unequivocally identified and evaluated by GC-ITMS during the processes. Although acrinathrin is almost destroyed when exposed to irradiation for more than 400 h, photocatalysis with TiO2 noticeably reduced degradation to a few hours. In this case, with the additional presence of peroxydisulphate, in less than 2 h acrinathrin is completely destroyed. Mineralisation of acrinathrin, without catalyst, was only around 50% after 400 h of irradiation.     

Treatment of chlorinated solvents by TiO2 photocatalysis and photo-Fenton: influence of operating conditions in a solar pilot plant

Titanium dioxide photocatalysis (using 20 0mg l(-1) of TiO2), under aerobic and anaerobic conditions, and photo-Fenton (2 and 56 mg l(-1) iron) were applied to the treatment of different NBCS (non-biodegradable chlorinated solvents), such as dichloroethane, dichloromethane and trichloromethane dissolved in water at 50 mg l(-1). All the tests were performed in a 35-l solar pilot plant with compound parabolic collectors (CPCs) under natural illumination. The two solar treatments were compared with attention to chloride release and TOC mineralisation, as the main parameters. Photo-Fenton was found to be the more appropriate treatment for these compounds, assuming volatilisation as a drawback of photocatalytic degradation of NBCS dissolved in water. In this context, several operating parameters related to NBCS degradation, e.g., treatment time, temperature, hydrogen peroxide consumption and volatility of parent compounds are discussed. The correct choice of operating conditions can very often diminish the problem of volatilisation during treatment.