Multi-criteria evaluation technique for SFI site identification of NORMS and oil industry waste disposal – Possibilities in Kuwait

Waste generation and accumulating quantities of oil field waste are a matter of environmental concern. This study proposes the Slurry Fracture Injection (SFI) technique as an alternative waste disposal method. The slurried solids injection waste disposal method is environmentally secure and permanent, leaving no future liabilities that must be risk-evaluated or priced. An entire waste stream comprising ground solids and waste water can be injected into deep and hydraulically secure target strata with no contamination of potable water-bearing formations or formations outside the target zone that may contain resources (gas and oil). The slurry injection method can be used to clean and reclaim landfills, oil pits and granular waste dumps. This article proposes a two-tier screening method for evaluating the feasibility of this technique and the identification of suitable target zones. A stringent environmental and process control monitoring program should complement the planning and operational period to ensure environmental protection, waste containment, and regulatory HSE compliance.     

Denitrification potential of the Northern Arabian Gulf—an experimental study

The study aims to establish denitrification potential of the Northern Arabian Gulf (NAG), as nitrogen critically affects the ocean productivity, obliterates acidity, oxidative capacity and radiative transfer capability of atmosphere. The experimental study was conducted by taking cores from intertidal zones from two different sites in North and South, referred as sites N and S; representing two distinct environmental milieu. The experiment was conducted in controlled laboratory conditions simulating the tidal cycles. Multiple cores were taken and loaded with seawater with different N concentrations, the redox potential was established for each condition. Redox potential was significantly lower at 10?cm depth compared to the surface in all cores (P?<?0.001). The redox potential at surface and at 10?cm depth was significantly lower at site S compared to site N (P?<?0.001; F?=?714.2), suggesting anaerobic sediments at site S. Effects of nitrate spiked seawater on denitrification under nonflooded and flooded conditions at the two sites were also studied. Three-way ANOVA analysis indicated that site, nitrate concentration, and flooding had significant main and interactive effects on the rate of denitrification. The results suggest that under ambient nitrate concentrations (0.03?mg NO₃-N?l^?1), 6.3?±?2.1?g NO₃-N?ha?day can be denitrified by inter-tidal zone sediments. At a nitrate concentration of 1?mg NO₃-N?l^?1, 92?±?16?g NO₃-N?ha?day may be denitrified whilst at a very high nitrate load of 10?mg NO₃-N?l^?1, the sediments may attain a rate of denitrification close to 404?±?78?g NO₃-N?ha?day.     

Localized hyper saline waters in Arabian Gulf from desalination activity��an example from South Kuwait

Desalination is the only means of reliable water supply in most of the Arabian Gulf States including Kuwait, Saudi Arabia, Bahrain, Qatar, and United Arab Emirates. Huge desalination capacities are installed on the western margin of the Arabian Gulf contributing to increased salinity off the coast. This paper presents long term salinity observation made near outfall of Az Zour Power and Desalination Plant in South Kuwait. The salinity values peak at around 50 ppt at observation station located in open gulf around 5 km from the outfall of the power and desalination plant. The observation highlights the stress on the local marine environment continued incremental salinity can impair the marine biodiversity in the area. The study suggests that a stringent post construction and operational offshore water quality assessment can help in early detection of potentially complex environmental issues.     

Polybrominated diphenyl ethers (PBDEs) in soils along a rural-urban-rural transect: sources, concentration gradients, and profiles

This study reports concentrations of PBDEs in surface soil samples collected along a 140 km transect across Kuwait to assess the role of urban centers as sources of persistent organic pollutants to the surrounding environment. The ΣPBDE concentrations varied by a factor of ∼250 and ranged from 289 to 80,078 pg g⁻¹ d.w. The concentrations of PBDEs in Kuwait City were significantly higher (p < 0.01) than those collected from sites outside the city supporting the hypothesis that urban centers are sources of PBDEs. The congener profiles were dominated by BDE-209, accounting for 93% of the PBDEs in the soil samples. The concentrations of all congeners (except BDE-209) were highly correlated with percent organic carbon (%OC) (p > 0.05) when the data from Kuwait City was omitted from the analysis. These findings suggest that soil concentrations outside the urban centers were close to equilibrium with the atmosphere.     

Comparison of Advection-Diffusion Models and Neural Networks for Prediction of Advanced Water Treatment Effluent

An artificial neural network (ANN) can help in the prediction of advanced water treatment effluent and thus facilitate design practices. In this study, sets of 225 experimental data were obtained from a wastewater treatment process for the removal of phosphorus using oven-dried alum residuals in fixed-bed adsorbers. Five input variables (pH, initial phosphorus concentration, wastewater flow rate, porosity, and time) were used to test the efficiency of phosphorus removal at different times, and ANNs were then used to predict the effluent phosphorus concentration. Results of experiments that were conducted for different values of the input parameters made up the data used to train and test a multilayer perceptron using the back-propagation algorithm of the ANN. Values predicted by the ANN and the experimentally measured values were compared, and the accuracy of the ANN was evaluated. When ANN results were compared to the experimental results, it was concluded that the ANN results were accurate, especially during conditions of high phosphorus concentration. While the ANN model was able to predict the breakthrough point with good accuracy, the conventional advection-diffusion equation was not as accurate. A parametric study conducted to examine the effect of the initial pH and initial phosphorus concentration on the effluent phosphorus concentration at different times showed that lower influent pH values are the most suitable for this advanced treatment system.     

Harvesting of microalgae biomass from the phycoremediation process of greywater

The wide application of microalgae in the field of wastewater treatment and bioenergy source has improved research studies in the past years. Microalgae represent a good source of biomass and bio-products which are used in different medical and industrial activities, among them the production of high-valued products and biofuels. The present review focused on greywater treatment through the application of phycoremediation technique with microalgae and presented recent advances in technologies used for harvesting the microalgae biomass. The advantages and disadvantages of each method are discussed. The microbiological aspects of production, harvesting and utilization of microalgae biomass are viewed.