Monitoring of eutrophication and nutrient limitation in the Izmir Bay (Turkey) before and after Wastewater Treatment Plant

The distribution of inorganic nutrients and phytoplankton chlorophyll-a was investigated and N/P ratios were determined in Izmir Bay during 1996-2001. The average concentrations showed ranges of 0.01-0.19 and 0.01-10 microM for phosphate-phosphorus; 0.11-1.8 and 0.13-27 microM for (nitrate+nitrite)-nitrogen, 0.30-4.1 and 0.50-39 microM for silicate and 0.02-4.3 and 0.10-26 microg l(-1) for chlorophyll-a in the outer and middle-inner bays, respectively. The results are compared with the values obtained from the relatively unpolluted waters of the Aegean Sea. The N/P ratio is significantly lower than the assimilatory optimal (N/P=15:1) in conformity with Redfield's ratio N/P=16:1. Nitrogen is the limiting element in the Izmir Bay. Phosphate, which originates from detergents, is an important source for eutrophication in the bay, especially in the inner bay. In early 2000, a Wastewater Treatment Plant (WTP) began to treat domestic and industrial wastes. This plant treats the wastes about 60% capacity between 2000 and 2001. The sampling periods cover before and after treatment plant. Although the capacity of wastewater plant is sufficient for removal of nitrogen from the wastes, it is inadequate for removal of phosphate. This is also in accordance with the decreasing N/P ratios observed during 2000-2001 (after WTP) in the middle-inner bays.     

Properties of steel foundry electric arc furnace dust solidified/stabilized with Portland cement

Electric arc furnace dust from steel production is generated in considerable amounts worldwide and needs to be treated as hazardous waste. The aim of this study was to investigate the properties of electric arc furnace dust solidified/stabilized by using Portland cement. Mortar and paste samples were prepared with varying waste-to-binder ratios between 0% and 90%. A comprehensive experimental program was designed including XRF characterization, setting time, unconfined compressive strength, and toxicity characteristics leaching procedure (TCLP), synthetic precipitation leaching procedure (SPLP), and acid neutralization capacity (ANC) tests. The results were evaluated in order to determine if the solidified /stabilized product can be disposed of at a landfill site with domestic waste or at a segregated landfill. The effect of using sand on S/S performance was also investigated. The results indicated that the solidification /stabilization process using PC helps the heavy metals to be bound in the cement matrix, but the TCLP leaching results exceeded the EPA landfilling limits. The SPLP leaching results conformed to the limits implying that the waste or S/S products can be disposed of at a segregated landfill; however the low ANC of the S/S products reveals that there may be leaching in the long-term. The sand used in the mortar samples adversely affected the S/S performance, causing higher heavy metal leaching levels, and lower pH levels in the leachate after the TCLP extraction than those measured in the leachate of the paste samples.     

Dissolved and dispersed petroleum hydrocarbons in the Aegean Sea

The distribution and transportation of Dissolved and Dispersed Petroleum Hydrocarbon (DDPH) were investigated in the Aegean Sea with the hydrodynamics of the water masses of the region. It is clear that distribution of this pollutant is strongly affected by physical dynamics of environment. The data were collected during cruises in November 1994, in the framework of National Marine Measurement and Monitoring Programme in the Aegean Sea. In the present study additionally the Chlorophyll‐a was measured fluorometrically and there is good correlation between petroleum hydrocarbon and chlorophyll‐a in the Aegean Sea. DDPH data was used to search origin of hydrocarbons: biogenic or non biogenic.     

Assessment of marine pollution in Izmir Bay: nutrient, heavy metal and total hydrocarbon concentrations

Izmir Bay (western Turkey) is one of the great natural bays of the Mediterranean. Izmir is an important industrial and commercial centre and a cultural focal point. The main industries in the region include food processing, oil, soap and paint production, chemical industries, paper and pulp factories, textile industries and metal processing. The mean concentrations showed ranges of 0.01-0.19 and 0.01-10 microM for phosphate, 0.10-1.8 and 0.12-27 microM for nitrate+nitrite, and 0.30-5.8 and 0.43-39 microM for silicate in the outer and middle-inner bays, respectively. The TNO(x)/PO(4) ratio is significantly lower than the Redfield's ratio and nitrogen is the limiting element in the middle-inner bays. Diatoms and dinoflagellates were observed all year around in the bay and are normally nitrogen limited. Metal concentrations ranged between Hg: 0.05-1.3, Cd: 0.005-0.82, Pb: 14-113 and Cr: 29-316 microg g(-1) in the sediments. The results showed significant enrichments during sampling periods from Inner Bay. Outer and middle bays show low levels of heavy metal enrichments except estuary of Gediz River. The concentrations of Hg, Cd and Pb in the outer bay were generally similar to the background levels from the Mediterranean. The levels gradually decreased over the sampling period. Total hydrocarbons concentrations range from 427 to 7800 ng g(-1) of sediments. The highest total hydrocarbon levels were found in the inner bay due to the anthropogenic activities, mainly combustion processes of traffic and industrial activities. The concentrations of heavy metals found in fish varied for Hg: 4.5-520, Cd: 0.10-10 and Pb: 0.10-491 microg kg(-1) in Izmir Bay. There was no significant seasonal variation in metal concentrations. An increase in Hg concentration with increasing length was noted for Mullus barbatus. A person can consume more than 2, 133 and 20 meals per week of fish in human diet would represent the tolerable weekly intake of mercury, cadmium and lead, respectively, in Izmir Bay. Heavy metal levels were lower than the results in fish tissues reported from polluted areas of the Mediterranean Sea.     

Bioconversion of industrial wastes: paint sludge from automotive manufacturing

The compostability of water-based paint sludge originating from the automotive industry was investigated. Six reactors were operated. Wastewater treatment sludge from the same industry was used as additional substrate, and corncob was used as a bulking agent. The level of paint sludge within the compost mixtures varied between 55 and 85%. All reactors yielded a temperature increase up to thermophilic phase levels (>?40 °C) for a minimum of 5 days, and organic matter and C/N losses were observed. BTEX concentrations decreased during composting. Nickel and tin levels in the final product exceeded the legal compost limits. The calorific value of the compost mixtures increased from 9532 to 18774 kJ/kg at the end of the composting process. It was seen that the process applied in this study can be utilized as a biodrying step before the usage of paint sludge at cement kilns as additional fuel.     

A dynamic model for costing disaster mitigation policies

The optimal level of investment in mitigation strategies is usually difficult to ascertain in the context of disaster planning. This research develops a model to provide such direction by relying on cost of quality literature. This paper begins by introducing a static approach inspired by Joseph M. Juran's cost of quality management model (Juran, 1951) to demonstrate the non‐linear trade‐offs in disaster management expenditure. Next it presents a dynamic model that includes the impact of dynamic interactions of the changing level of risk, the cost of living, and the learning/investments that may alter over time. It illustrates that there is an optimal point that minimises the total cost of disaster management, and that this optimal point moves as governments learn from experience or as states get richer. It is hoped that the propositions contained herein will help policymakers to plan, evaluate, and justify voluntary disaster mitigation expenditures.     

A cluster-based decision support system for estimating earthquake damage and casualties

This paper describes a Decision Support System for Disaster Management (DSS-DM) to aid operational and strategic planning and policy-making for disaster mitigation and preparedness in a less-developed infrastructural context. Such contexts require a more flexible and robust system for fast prediction of damage and losses. The proposed system is specifically designed for earthquake scenarios, estimating the extent of human losses and injuries, as well as the need for temporary shelters. The DSS-DM uses a scenario approach to calculate the aforementioned parameters at the district and sub-district level at different earthquake intensities. The following system modules have been created: clusters (buildings) with respect to use; buildings with respect to construction typology; and estimations of damage to clusters, human losses and injuries, and the need for shelters. The paper not only examines the components of the DSS-DM, but also looks at its application in Besiktas municipality in the city of Istanbul, Turkey.     

Incorporation of solar-heated aeration and greenhouse in grass composting

Environmental Science and Pollution Research - Composting is an environment-friendly method for recycling organic waste, and incorporation of heat and aeration can enhance favorable conditions for...     

Tree species diversity and its relationship to stand parameters and geomorphology features in the eastern Black Sea region forests of Turkey

We studied the effects of stand parameters (crown closure, basal area, stand volume, age, mean stand diameter number of trees, and heterogeneity index) and geomorphology features (elevation, aspect and slope) on tree species diversity in an example of untreated natural mixed forest stands in the eastern Black Sea region of Turkey. Tree species diversity and basal area heterogeneity in forest ecosystems are quantified using the Shannon-Weaver and Simpson indices. The relationship between tree species diversity basal area heterogeneity stand parameters and geomorphology features are examined using regression analysis. Our work revealed that the relationship between tree species diversity and stand parameters is loose with a correlation coefficient between 0.02 and 0.70. The correlation of basal area heterogeneity with stand parameters fluctuated between 0.004 and 0.77 (R2). According to our results, stands with higher tree species diversity are characterised by higher mean stand diameter number of diameter classes, basal area and lower homogeneity index value. Considering the effect of geomorphology features on tree species or basal area heterogeneity we found that all investigated relationships are loose with R < or = 0.24. A significant correlation was detected only between tree species diversity and aspect. Future work is required to verify the detected trends in behaviour of tree species diversity if it is to estimate from the usual forest stand parameters and topography characteristics.     

Spatial Distribution Patterns,Sources of Heavy Metals,and Relation to Ecological Risk of Surface Sediments of the Cyprus Northern Shelf (Eastern Mediterranean)

In this study, the spatial distribution of metals and the sources of metal pollution were investigated along the Northern Shelf of Cyprus (Mediterranean Sea). The concentrations of heavy metals and organic matter were measured in sediments collected from the Gemi Konagi, Girne, and Gazi Magusa areas. Measured metal values were compared with Mediterranean background concentrations. Cu and Zn concentrations at the Gemi Konagi area and all of the Cr values were higher than Mediterranean backgrounds. The metal levels were evaluated by the enrichment factor (EF), contamination factor (C_f) and degree of contamination (C_d). EF results indicated that heavy metal sources were probably originated from natural processes and mining activities. The C_f values of Hg indicated low contamination. The C_d (degree of contamination) values for all heavy metals also showed a low degree of contamination at the study area. Metal levels were also compared with the numerical Sediment Quality Guidelines (SQG) for an environmental risk assessment. Results showed that sediments were classified as heavily polluted by Cu and moderately polluted by Zn at Gemi Konagi and heavily polluted by Cr and Ni contamination at all sampling areas per the SQG.