The 2006 war and its inter-temporal economic impact on agriculture in Lebanon

The July 2006 war waged by Israel on Lebanon caused an estimated USD 1 billion of direct (financial) damage to infrastructure. However, it generated also significant indirect (economic/inter-temporal) costs. One sector that suffered considerably in this respect was agriculture, the main source of income for 30–40 per cent of Lebanese. This paper's main objective is to develop a methodology to estimate the total—direct and indirect—cost of the war to agricultural crop production, using an area of south Lebanon as a focal point. The indirect loss assessment viewed inter-temporal reductions in crop production values as the opportunity cost of not working fields due to the presence of unexploded ordnance (UXO). Various crops were evaluated for two scenarios (50 and 100 per cent damage due to UXO) over UXO-clearance periods of five and 10 years. The results indicate that any damage estimates that include only direct losses will under-estimate total losses by 80 and 87 per cent for the five- and 10-year periods, respectively.     

Charge‐transfer chromatographic study of the interaction of commercial pesticides with hydroxypropyl‐β‐cyclodextrin

The interaction between 33 commercial pesticides with hydroxypropyI‐β‐cyclodextrin (HPBCD) was studied by charge‐transfer reversed‐phase thin‐layer chromatography using aqueous sodium chloride solutions as eluents. Each pesticide interacted with HPBCD, their lipophilicity linearly decreased with increasing HPBCD concentration, the pesticide ‐ HPBCD complex (probably inclusion complex) always being more hydrophilic than the uncomplexed pesticide. In many cases the retention of pesticide increased with increasing concentration of salt in the eluent. This effect can be tentatively explained by the suppression of the dissociation of the polar groups in the solute molecules resulting in increased apparent lipophilicity. No significant correlation was found between lipophilicity and complex stability or between salting‐out effect and lipophilicity, that is other than hydrophobic forces are involved in the pesticide ‐ HPBCD interaction.     

Aerodynamics of ancient egyptian Obelisks and their structural response to Boundary Layer wind

Environmental Fluid Mechanics - Ancient Egyptian obelisks have been carved thousands of years ago and survived many earthquakes and wind storms. This study examines the aerodynamic characteristics...     

Residue levels of organochlorine pesticides in some ecosystem components of Manzala Lake

To evaluate the organochlorine pesticide (OCP) contamination of Manzala Lake, its ecosystem was investigated during the winter season (December to March). The studied ecosystem components were water, sediment, aquatic weeds, and fishes in four locations. The samples were analyzed by gas chromatography with electron capture detector. Pollutant levels of total OCPs showed significantly high levels in the water areas of Round road (46.253 ng/ml), Port-Said Damietta road (19.301 ng/ml), followed by Bughas El-Rasoah (5.539 ng/ml), then Ashtoum El Gamel (natural reserve area now) (0.289 ng/ml). Organochlorines were detected in sediment only in Round road (3.359 μg/kg) and Port-Said Damietta road (0.171 μg/kg) by significant order while they were undetectable in Ashtoum El Gamel and Bughas El-Rasoah. Total OCPs in aquatic weeds ranged between 0.194 μg/kg in Port-Said Damietta and 0.026 μg/kg in Ashtoum El Gamel. While OCPs were 0.160 and 0.153 μg/kg in Round road and Bughas El-Rasoah, respectively. Concerning fish muscles OCPs were significantly higher in the Round road area (0.397 μg/kg) followed by the Port-Said Damietta road (0.258 μg/kg), and finally, Ashtoum El Gamel samples (0.126 μg/kg). The results revealed the direct relation for the accumulation of OCPs between studied ecosystem parameters at the Manzala Lake during the winter season. Results also demonstrated that fish samples collected from the Manzala Lake in the studied areas were contaminated with levels of organochlorines, not higher than the maximum permissible level recorded by FAO/WHO, and that the public is not at risk with fish consumption.     

Mobility of selected trace elements in Mediterranean red soil amended with phosphogypsum: experimental study

Soil amendment by phosphogypsum (PG) application becomes of increasing importance in agriculture. This may lead, however, to soil, plant, and groundwater contamination with trace elements (TEs) inherently present in PG. Monitoring of selected TEs (Pb, Zn, Cu, and Cd) distribution and mobility in a Mediterranean red soil profile has been performed in soil parcels applied with PG over a 16-month period. Concentrations were measured in soil and plant samples collected from various depth intervals at different points in time. TEs sequential extraction was performed on soil and PG samples. Results showed soil profile enrichment peaked 5 months after PG application for Cd, and 12 months for Pb, Zn, and Cu. Rainwater, pH, total organic carbon, and cationic exchange capacity were the main controlling factors in TEs accumulation in soils. Cd was transferred to a soil depth of about 20 cm. Zn exhibited mobility towards deeper layers. Pb and Cu were accumulated in around 20-55-cm-deep layers. PG increased the solubility of the studied TEs; PG-applied soils contained TEs bound to exchangeable and acid-soluble fractions in higher percentages than reference soil. Pb, Zn, and Cu were sorbed into mineral soil phases, while Cd was mainly found in the exchangeable (bio-available) form. The order of TEs decreasing mobility was Zn > Cd > Pb > Cu. Roots and leaves of existed plants, Cichorium intybus L., accumulated high concentrations of Cd (1-2.4 mg/kg), exceeding recommended tolerable levels, and thus signifying potential health threats through contaminated crops. It was therefore recommended that PG should be applied in carefully established, monitored, and controlled quantities to agricultural soils.     

Quaternary adsorption equilibria from aqueous systems onto decolourizing activated carbon

An experimental study has been conducted to obtain the adsorption isotherms of four typical pollutants from quaternary aqueous systems onto decolourizing activated carbon. The four materials investigated are: Phenol, 1,4-dihydroxybenzene, 4-amino-l-naphthalene sulfonic acid-sodium salt and Benzoic acid. The study has concentrated on the dilute region of concentrations which range from 10 to 165 ppm (mg/L) at an operating temperature of 30 °C.

The quaternary adsorption equilibria have been modeled using the extended Langmuir predictive model and the ideal adsorbed solution (IAS) theory. In employing these models for the prediction of multicomponent adsorption equilibria, the single-solute isotherms are needed. These isotherms have been fitted to Langmuir, Freundlich, and Dubinin models and the resulting model parameters, which are needed for the prediction of multicomponent adsorption equilibria, are reported. Predictions obtained from the extended Langmuir predictive model and the ideal adsorbed solution (IAS) model are in agreement, however, they deviate to an appreciable extent from experimental observations.     

Effect of Museum Conditions on Historical Dyed Silk Fabric with Madder Dye

Historical textiles suffer from deterioration as a result of exposure to uncontrolled environmental conditions in museums. To establish standard conditions for display of undyed and dyed silk fabrics in Egyptian museums, different artificial aging procedures (thermal, light and chemical) were applied to examine their effects on the physical, mechanical and chemical structure of the silk fiber. Samples of undyed silk and silk dyed with madder with different mordants, iron II sulphate; iron III chloride and copper sulphate were used for this purpose. These aged samples were examined for their surface morphology, color parameters (CIE Lab), mechanical properties, degree of crystallinity, secondary structure analysis and amino acids content.     

Experimental investigation of dust pollutants and the impact of environmental parameters on PV performance: an experimental study

The accumulation of dust pollution on the photovoltaic (PV) module can have a significant effect on the productivity and efficiency of PV systems in different locations in the world. Dust which accumulated over time on the PV module and is based on weather conditions led to the reduction in the effectiveness of solar cells. The aim of this research was to experimentally investigate the effect of the natural dust and the effects of environmental parameters on PV performance. The experiments were conducted to propose a model for the current, voltage, power and efficiency and to simulate the effect of environmental parameters on PV performance. The natural dust investigated consisted of different compounds: SiO₂ (45.53 %), CaO (24.62 %), Al₂O₃ (10.83 %), Fe₂O₃ (10.46 %), MgO (6.33 %), K₂O (0.87 %), TiO₂ (0.45 %), SO₃ (0.24 %), MnO₂ (0.21), Cr₂O₃ (0.23 %), SrO (0.13 %) and NiO (0.09 %). It was found that the most accurate correlation is a polynomial from seventh degree for current, voltage, power and efficiency, fourth degree for solar radiation and temperature, cubic degree for humidity and wind velocity. The coefficients of general model are 0.6343, 0.0110, 0.0 and 0.0001 for PV module, respectively, with 0.0011 fitting factor. The proposed model has been validated using models in the literature.     

The diagnostic accuracy of intraoperative frozen section biopsy for diagnosis of sentinel lymph node metastasis in breast cancer patients: a meta-analysis

Environmental Science and Pollution Research - Sentinel lymph node (SLN) sampling is important for evaluating the nodal stage of breast cancer when the axillary nodes are clinically free of...