长三角绿色技术创新网络结构特征与优化策略

绿色技术创新作为区域技术创新体系的重要组成部分,是维持区域发展可持续性、增强区域竞争优势的重要驱动力.基于区域一体化的研究视角,通过采集长三角绿色技术专利合作及绿色技术转移数据,运用Gephi复杂网络分析方法,对长三角绿色技术创新网络进行结构分析.结果 表明:(1)长三角绿色技术创新网络发育程度较低,大量城市在绿色技术创新网络中较边缘化;(2)绿色技术创新依赖创新主体间知识互动,地理邻近促进了创新合作行为的产生和知识的扩散;(3)长三角绿色技术创新网络"强-强联系"与"核心-边缘"结构特征明显,绿色技术专利合作网络呈现"一超多强"的多中心格局,绿色技术转让网络呈现单中心格局;(4)区域一体化下,长三角绿色技术创新网络兼具邻近性和等级性特征,不同类型城市参与创新网络应有差异;进而,提出长三角绿色技术创新网络优化策略.创新点在于:建立了区域一体化与技术创新网络的关联,探讨了绿色技术创新的空间组织形式,强调了地理邻近对于绿色技术创新网络的重要性.     

A combined radical and non-radical oxidation processes for efficient degradation of Acid Orange 7 in the homogeneous Cu(II)/PMS system: important role of chloride

Environmental Science and Pollution Research - Trace copper ion (Cu(II)) in water and wastewater can trigger peroxymonosulfate (PMS) activation to oxidize organic compounds, but it only works under...     

出口中东汽车的设计改善建议

我国汽车出口到中东市场,由于用车环境和用车习惯不同,需要进行一些设计改善。本文通过对科威特的在用汽车进行调查和分析,得到出口中东市场的汽车在变速箱、天窗、座椅和内外饰颜色等配置上的建议,同时结合以往出口经验讨论了出口中东市场可能需要在冷却系统、空调系统、燃油蒸发系统、动力性能和充放电平衡等方面进行的优化。     

Ti3C2纳米层状材料对废水中Cr（Ⅵ）的光催化去除性能

以Ti₃AlC₂为原料,采用HF刻蚀工艺制备出12种Ti₃C₂纳米层状材料,对其形貌进行了表征,并考察了以其作为光催化剂对废水中Cr（Ⅵ）的处理效果。实验结果表明：HF体积分数为80%、刻蚀时间为48 h时得到的MX-80-48的形貌较好;MX-80-48具有类似石墨烯的二维层状结构,纳米层厚度约20~50 nm,孔径2~10 nm,比表面积14.8 m²/g,在400~700 nm可见光范围内表现出强烈的吸光性;当Cr（Ⅵ）的初始质量浓度为40.00 mg/L、MX-80-48投加量为200 mg/L、pH=2、反应时间4 h（暗反应1 h+光照3 h）时,Cr（Ⅵ）去除率可达100%。     

Comparison on surface properties and desulfurization of MnO2 and pyrolusite blended activated carbon by steam activation

In this study, MnO₂ and pyrolusite were used as the catalysts to prepare modified activated carbon, that is, AC-Mn and AC-P, respectively, from coals by blending method and steam activation. The Brunauer–Emmett–Teller (BET) results indicated that the AC-P had higher surface areas and micropore volumes than the AC-Mn with the same blending ratio. The relative contents of basic functional groups (i.e., C = O, π-π*) on AC-P were slightly lower than those on AC-Mn, while both contained the same main metal species, namely, MnO. The desulfurization results showed that with 3 wt% of blending ratio, AC-Mn3 and AC-P3 had higher sulfur capacities at 220 and 205 mg/g, respectively, which were much higher than for the blank one (149.6 mg/g). Moreover, the AC-P had relatively higher sulfur capacity than the AC-Mn with the same contents of Mn, which might be attributed to the existence of other metals in pyrolusite. After the desulfurization process, MnO were gradually transferred into MnSO₄, and the relative contents of basic functional groups decreased evidently for both AC-Mn3 and AC-P3. The results demonstrated that pyrolusite could be one good alternative to MnO₂ to prepare modified activated carbon for desulfurization.

Implications: MnO₂ and pyrolusite were used as the additives to prepare modified activated carbon from coals by a blending method and by steam activation, that is, AC-Mn and AC-P, respectively. The AC-P had higher surface areas and micropore volumes than the AC-Mn with the same blending ratio. The AC-Mn and AC-P had higher sulfur capacities than a blank one. Moreover, the AC-P had relatively higher sulfur capacity than the AC-Mn with the same contents of Mn. The results demonstrated that pyrolusite could be one good alternative to MnO₂ to prepare modified activated carbon for desulfurizatio.     

网状季胺基阴离子吸附剂制备及吸附性能

以丝瓜络为原料,采用醚化-接枝技术制备出季胺基阴离子交换吸附剂。采用电镜扫描、傅里叶红外光谱、比表面积孔径分布测定仪和元素分析仪等仪器对其进行分析和结构表征,并考察了温度、p H和硝酸盐初始浓度等因素对NO-3去除率的影响。实验结果表明,在20℃,p H值为3~10时,NO-3的吸附率可达90%左右;在不同温度下该吸附过程用Langmuir等温线模型和Freundich等温线模型描述均可;与伪一级动力学方程相比,伪二级动力学方程能更好地描述其吸附动力学方程。     

空调控温过程的系统动力学模拟分析

以房间、人员、设备和空调设备组成的空调控温系统为单元,以室温为目标,研究影响室温的各因素之间的关系,找出哪种因素是主要因素.运用Vensim软件建立空调控温系统的因果图和流图,并建立速率方程,进而进行模拟.根据模拟结果,对室温和温差进行分析,并探讨了空调调节系数、房子散热系数变动时对室温和波动时间的影响情况.验证了空调控温过程中室温的震荡过程和空调机发生作用的反应延迟时间.     

转炉煤气放散点火装置的改造设计

从济钢转炉煤气回收系统设计条件、煤气放散点火方案的确定与系统组成等方面介绍了济钢转炉煤气回收系统放散点火系统的设计方案及设计参数,描述了放散点火系统的工作原理及主要功能,对冶金行业实施转炉煤气放散点火有一定的参考价值.