Ionic imbalance due to hydrogen carbonate from Asian dust

In an attempt to identify the ionic imbalance, hydrogen carbonate, HCO₃⁻ (bicarbonate), was determined together with the commonly determined nine major ions because the imbalance was frequently encountered in the chemical analysis of samples with high pHs. Titration method was applied for the determination of the samples with pH higher than 5.6. These samples amounted to 102 of the 1536 samples collected in Hokkaido, Northern Japan, from April 1998 to December 2002. Of the 102 samples, 74 (Group A) showed an acceptable ion balance without including HCO₃⁻. In the other 28 (Group B), however, inclusion of HCO₃⁻ successfully improved the ion balance. These results suggested that hydrogen carbonate was a potential candidate for explaining the imbalance. The hydrogen carbonate concentrations showed a strong correlation with the corresponding non-sea salt calcium (nss-Ca²⁺) concentrations, which implied that hydrogen carbonate was derived from calcium carbonate particles incorporated into falling raindrops or cloud droplets. For Group A, the relationship between hydrogen carbonate and the nss-calcium ion concentration was very similar to that for commonly suspended particles in Hokkaido. On the other hand, Group B exhibited a stronger but significantly different correlation. To the samples of Group B, a back-trajectory analysis was applied to demonstrate that the samples were associated with aerosol travelling from Northern China or Mongolia, which indicated that alkaline aerosol affected the chemistry. In consideration of these findings, the current standard of the ion balance should be critically reviewed for modification in regard to the contribution of hydrogen carbonate not only in source areas but also in receptor areas of alkaline aerosol.     

Volcano-related materials in concretes: a comprehensive review

Massive volcano-related materials (VRMs) erupted from volcanoes bring the impacts to natural environment and humanity health worldwide, which include generally volcanic ash (VA), volcanic pumice (VP), volcanic tuff (VT), etc. Considering the pozzolanic activities and mechanical characters of these materials, civil engineers propose to use them in low carbon/cement and environment-friendly concrete industries as supplementary cementitious materials (SCMs) or artificial/natural aggregates. The utilization of VRMs in concretes has attracted increasing and pressing attentions from research community. Through a literature review, this paper presents comprehensively the properties of VRMs and VRM concretes (VRMCs), including the physical and chemical properties of raw VRMs and VRMCs, and the fresh, microstructural and mechanical properties of VRMCs. Besides, considering environmental impacts and the development of long-term properties, the durability and stability properties of VRMCs also are summarized in this paper. The former focuses on the resistance properties of VRMCs when subjected to aggressive environmental impacts such as chloride, sulfate, seawater, and freezing–thawing. The latter mainly includes the fatigue, creep, heat-insulating, and expansion properties of VRMCs. This study will be helpful to promote the sustainability in concrete industries, protect natural environment, and reduce the impacts of volcano disaster. Based on this review, some main conclusions are discussed and important recommendations regarding future research on the application of VRMs in concrete industries are provided.     

Mobile monitoring along a street canyon and stationary forest air monitoring of formaldehyde by means of a micro-gas analysis system

A micro-gas analysis system (μGAS) was developed for mobile monitoring and continuous measurements of atmospheric HCHO. HCHO gas was trapped into an absorbing/reaction solution continuously using a microchannel scrubber in which the microchannels were patterned in a honeycomb structure to form a wide absorbing area with a thin absorbing solution layer. Fluorescence was monitored after reaction of the collected HCHO with 2,4-pentanedione (PD) in the presence of acetic acid/ammonium acetate. The system was portable, battery-driven, highly sensitive (limit of detection = 0.01 ppbv) and had good time resolution (response time 50 s). The results revealed that the PD chemistry was subject to interference from O(3). The mechanism of this interference was investigated and the problem was addressed by incorporating a wet denuder. Mobile monitoring was performed along traffic roads, and elevated HCHO levels in a street canyon were evident upon mapping of the obtained data. The system was also applied to stationary monitoring in a forest in which HCHO formed naturally via reaction of biogenic compounds with oxidants. Concentrations of a few ppbv-HCHO and several-tens of ppbv of O(3) were then simultaneously monitored with the μGAS in forest air monitoring campaigns. The obtained 1 h average data were compared with those obtained by 1 h impinger collection and offsite GC-MS analysis after derivatization with o-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine (PFBOA). From the obtained data in the forest, daily variations of chemical HCHO production and loss are discussed.     

Spatial differences of chemical features of atmospheric deposition between rainy season and winter in the areas facing to the Japan Sea, Japan

Atmospheric deposition was collected using filtrating bulk samplers at 32 sites in the areas facing to the Japan Sea (AFJS) from April 1991 to March 1994. The data were analyzed for winter (January and February) and the rainy season (June and July) when the climate is just the opposite. The AFJS was geographically divided into five areas, that is western Tohoku (WT), Hokuriku (HR), eastern San-in (ES), western San-in (WS) and northern Kyushu (NK). WT, HR and ES receive more precipitation than other regions in winter. H+ depositions increase in winter except NK. This is mainly due to high winter H+ concentrations. In spite of large amounts of precipitation in WT, HR and ES in winter, nss-SO4(2-) concentration was nearly equal to the average throughout Japan. Namely, nss-SO4(2-) depositions in these areas were nearly twice the national mean. In WT, HR and ES, nss-Ca2+ concentrations in winter are lower than the average of the whole country (less than the half). This may be the cause of the lower potentials of neutralization and the higher remaining acid concentrations in WT, HR and ES than NK and WS.     

Re-emission of heavy water vapour from soil to the atmosphere

The re-emission process of tritiated water (HTO) deposited on a soil surface is an important process to assess tritium doses to the general public around nuclear fusion facilities in future. A field experiment using heavy water (HDO) as a substitute for HTO was carried out in the summertime to investigate the re-emission process of HTO from soil to the atmosphere. In the experiment, the time variations of depth profiles of HDO concentrations in soil exposed to HDO vapour and soil mixed with HDO were measured during the re-emission process on the field. The HDO concentrations in soil water in top soil layers of both the exposed and mixed soil rapidly decreased with time during the re-emission. However, the decrease of exposed soil was much greater than that of mixed soil. The re-emission process was analysed using a model including the evaporation of HDO from soil, the exchange between soil HDO and air H2O, and the diffusion of HDO in soil. It was found that the model is applicable to calculating the time variations of detailed depth profiles of HDO concentration in soil water in surface soil layers, using an estimated exchange velocity.     

Equity rules for burden sharing in the mitigation process of climate change

Although international negotiation on the mitigation of climate change is a process of determining burden-sharing rules between countries, there has been no clear agreement on equity principles for burden sharing. During the negotiating process up to the Kyoto Protocol, various proposals were made on such burden-sharing rules, but an agreement on emission targets for Annex I countries was achieved without explicitly agree-ing to any rules. In the next phase of the negotiation, debates on emission targets are likely to shift from those between developed countries to those between all parties to the convention. In such a phase, debates on burden-sharing rules will be revisited. The purpose of this paper is: (1) to determine implicitly a formula for the rule for burden sharing between Annex I countries that was considered to be underlying the emission targets of the Kyoto Protocol, and (2) to examine plausible emission targets and timing of commitments for non-Annex I countries in the future by using the result of the analysis on the Kyoto Protocol. A multi-regression method is used for this purpose. It was concluded that the burden sharing between Annex I countries in the Kyoto Protocol can mostly be explained by three variables: the increase in the rate of CO₂ emission during the years 1990 to 2010, the increase in the rate of afforestation between 1990 and 1995, and the GDP per capita at the time of negotiation. The timing of future commitments of developing countries and the levels of targets differ widely, depending on which index or formula is agreed as “equitable”. Some of the developing countries would have to start limiting their emissions within several years if GDP per capita or CO₂ per capita were chosen as the burden-sharing indicator. Developing countries would not have to make commitments until the mid-late 21st century if population growth rate were chosen. If the inferred formula of the Kyoto Protocol were applied to developing countries, they would have had to start mild limitation from 1990.     

Decomposition of poly(amide-imide) film enameled on solid copper wire using atmospheric pressure non-equilibrium plasma

The decomposition of a poly(amide-imide) thin film coated on a solid copper wire was attempted using atmospheric pressure non-equilibrium plasma. The plasma was produced by applying microwave power to an electrically conductive material in a gas mixture of argon, oxygen, and hydrogen. The poly(amide-imide) thin film was easily decomposed by argon-oxygen mixed gas plasma and an oxidized copper surface was obtained. The reduction of the oxidized surface with argon-hydrogen mixed gas plasma rapidly yielded a metallic copper surface. A continuous plasma heat-treatment process using a combination of both the argon-oxygen plasma and argon-hydrogen plasma was found to be suitable for the decomposition of the poly(amide-imide) thin film coated on the solid copper wire.     

Degradation of bisphenol A by photo-fenton processes

The photo-Fenton reactions, which could yield hydroxyl radicals via the catalytic degradation of H₂O₂ by Fe(II), were focused as one of the abiotic degradation processes of bisphenol A (BPA) in surface waters. At pH 6, in the presence of H₂O₂ only, 32% of BPA was degraded after 120?min of irradiation. However, 97% of BPA was degraded in the presence of both H₂O₂ and Fe(II). Without light irradiation, no BPA degradation was observed even in the presence of Fe(II) and H₂O₂. These results show that photo-Fenton processes are effective in the natural attenuation of BPA in surface water. In addition, the presence of humic acids (HAs), which were of more aliphatic nature, resulted in enhancing BPA degradation via the photo-Fenton processes. Therefore, HAs can be one of the important factors in enhancing the degradation of BPA in surface water via the photo-Fenton processes.     

Classification of the sugarcane residues and their characteristics—an environmental assessment of mortar with addition of sugarcane residues

Journal of Material Cycles and Waste Management - The use of agro-residue in resource-limited regions can be a smart way for civil construction to reduce costs, reduce emissions of pollutant gases...     

A new condensed toluene mechanism for Carbon Bond: CB05-TU

Toluene is ubiquitous in urban atmospheres and is a precursor to tropospheric ozone and aerosol (smog). An important characteristic of toluene chemistry is the tendency of some degradation products (e.g., cresols and methyl-catechols) to form organic nitro and nitrate compounds that sequester NOx (NO and NO₂) from active participation in smog formation. Explaining the NOx sinks in toluene degradation has made mechanism development more difficult for toluene than for many other organic compounds. Another challenge for toluene is explaining sources of radicals early in the degradation process. This paper describes the development of a new condensed toluene mechanism consisting of 26 reactions, and evaluates the performance of CB05 with this new toluene scheme (Toluene Update, TU) against 38 chamber experiments at 7 different environmental chambers, and provides recommendations for future developments. CB05 with the current toluene mechanism (CB05-Base) under-predicted the maximum O₃ and O₃ production rate for many of these toluene–NOx chamber experiments, especially under low-NOx conditions ([NOx]_t=0 < 100 ppb). CB05 with the new toluene mechanism (CB05-TU) includes changes to the yields and reactions of cresols and ring-opening products, and showed better performance than CB05-Base in predicting the maximum O₃, O₃ formation rate, NOx removal rate and cresol concentration. Additional environmental chamber simulations with xylene–NOx experiments showed that the TU mechanism updates tended to improve mechanism performance for xylene.