Biodegradation of crosslinked acrylic polymers by a white-rot fungus

Two synthetic superabsorbent crosslinked acrylic polymers were mineralized by the white-rot fungusPhanerochaete chrysosporium. The amount of polymer converted to CO₂ increased as the amount of polymer added to the cultures increased. In the presence of sufficiently large amounts of the superabsorbents, such that all of the culture fluid was absorbed and a gelatinous matrix was formed, the fungus still grew and mineralization was observed. Neither the polymers, nor their degradation products were toxic to the fungus. While the rates of mineralization were low, all of the polymers incubated in the liquid fungal cultures were completely depolymerized to water soluble products within 15–18 days. The depolymerization of the polymers was observed only in nitrogen limited cultures of the fungus which secrete the lignin degradation system, however, the water soluble products of depolymerization were mineralized in both nutrient limited and sufficient cultures of the fungus. The rate of mineralization of the depolymerized metabolites was more than two times greater in nutrient sufficient cultures. Following longer incubation periods, most (> 80 %) of the radioactivity was recovered in the fungal mycelial mat suggesting that carbon of the polymer had been converted to fungal metabolites.     

Changes in fetal heart rate pattern after intrauterine paracentesis in one twin with meconium peritonitis

We report a case of in utero paracentesis of ascites in a fetus with meconium peritonitis due to volvulus at 34 weeks which resulted in the correction of an abnormal fetal heart rate pattern and enabled vaginal delivery by preventing abdominal dystocia. The intrauterine intervention also helped to establish the diagnosis and potentially reduced the respiratory compromise after birth. Copyright © 2001 John Wiley & Sons, Ltd.     

Influence of canola and sunflower diet amendments on cattle feedlot manure

Cattle (Bos taurus) producers can replace a part of the traditional diet of barley (Hordeum vulgare L.) grain/silage with sunflower (Helianthus annus L.) seeds or canola meal (Brassica napus L.)/oil to enhance conjugated linoleic acids (CLA) content in milk and meat for its positive health benefits. The objective of this study is to investigate the effects of feeding sunflower or canola to finishing steers on cattle manure chemical properties and volatile fatty acid (VFA) content. The control diet contained 84% rolled barley and 15% barley silage, which provided only 2.6% lipid. The other six treatments had 6.6 to 8.6% lipid delivered from sources such as hay, sunflower seed (SS), canola meal/oil, and SS forage pellets. Manure samples (a mixture of cattle urine, feces, and woodchip bedding materials) were collected and analyzed after cattle had been on these diets for 113 d. The dietary source and level of lipid had no effect on organic N and nitrate N content in manure, but significantly affected ammonia N and VFA. Inclusion of SS forage pellets, hay, or canola meal/oil in cattle diets had no significant impact on manure characteristics, but SS significantly reduced the pH and increased propionic, isobutyric, and isovaleric content. In addition, N loss after excretion (mainly from urine N) increases with the pH and N levels in both feed and manure. The combination of SS with barley silage resulted in a lower VFA and NH3 content in manure and should be a more attractive option. To better manage N nutrient cycles and reduce NH3 related odor problems, feed and manure pH should be one of the factors to consider when determining feed mix rations.     

Characterizing spatial structure of sediment E. coli populations to inform sampling design

Escherichia coli can persist in streambed sediments and influence water quality monitoring programs through their resuspension into overlying waters. This study examined the spatial patterns in E. coli concentration and population structure within streambed morphological features during baseflow and following stormflow to inform sampling strategies for representative characterization of E. coli populations within a stream reach. E. coli concentrations in bed sediments were significantly different (p?=?0.002) among monitoring sites during baseflow, and significant interactive effects (p?=?0.002) occurred among monitoring sites and morphological features following stormflow. Least absolute shrinkage and selection operator (LASSO) regression revealed that water velocity and effective particle size (D ₁₀) explained E. coli concentration during baseflow, whereas sediment organic carbon, water velocity and median particle diameter (D ₅₀) were important explanatory variables following stormflow. Principle Coordinate Analysis illustrated the site-scale differences in sediment E. coli populations between disconnected stream segments. Also, E. coli populations were similar among depositional features within a reach, but differed in relation to high velocity features (e.g., riffles). Canonical correspondence analysis resolved that E. coli population structure was primarily explained by spatial (26.9–31.7 %) over environmental variables (9.2–13.1 %). Spatial autocorrelation existed among monitoring sites and morphological features for both sampling events, and gradients in mean particle diameter and water velocity influenced E. coli population structure for the baseflow and stormflow sampling events, respectively. Representative characterization of streambed E. coli requires sampling of depositional and high velocity environments to accommodate strain selectivity among these features owing to sediment and water velocity heterogeneity.     

弘文重教十余年的《文教资料简报》

创刊于1972年12月的《文教资料简报》是由南京师范学院(1984年易名为南京师范大学)内部编印的资料性月刊,主要目的是为文科教研服务。本文回顾该刊从创办至拥有"统一刊号"、从非正式出版物至成为正式出版物的历史沿革,具体观照该刊的编辑理念,总结该刊的内容特色、文献价值及经验启示。     

How effective has the Clean Water Act been at reducing pollutant mass emissions to the Southern California Bight over the past 35 years?

The Clean Water Act (CWA) has regulated discharges of contaminants since 1972. However, evaluations of the CWA's effectiveness at improving regional water quality are lacking, primarily because integration of monitoring data from multiple dischargers to assess cumulative effects is not required. A rare opportunity exists to assess CWA effectiveness by integrating mass emissions data from all major sources of contaminants to the Southern California Bight from 1971 to 2000. While the coastal population grew by 56% and total effluent volume increased 31% since 1971, mass emissions of nearly all constituents decreased since passage of the CWA, most by greater than 65%. Publicly owned treatment works were the dominant point source of many contaminants, but also accounted for the greatest reductions in pollutant discharge since 1971. As point source treatment has improved, the relative contribution of non-point sources, such as storm water runoff has increased. Despite the increased importance of storm water discharges, regional monitoring and data compilation of this source is lacking, making it difficult to accurately assess trends in non-point source discharge.     

Natural emissions for regional modeling of background ozone and particulate matter and impacts on emissions control strategies

Natural emissions adopted in current regional air quality modeling are updated to better describe natural background ozone and PM concentrations for North America. The revised natural emissions include organosulfur from the ocean, NO from lightning, sea salt, biogenic secondary organic aerosol (SOA) precursors, and pre-industrial levels of background methane. The model algorithm for SOA formation was also revised. Natural background ozone concentrations increase by up to 4 ppb in annual average over the southeastern US and Gulf of Mexico due to added NO from lightning while the revised biogenic emissions produced less ozone in the central and western US. Natural PM_2.5 concentrations generally increased with the revised natural emissions. Future year (2018) simulations were conducted for several anthropogenic emission reduction scenarios to assess the impact of the revised natural emissions on anthropogenic emission control strategies. Overall, the revised natural emissions did not significantly alter the ozone responses to the emissions reductions in 2018. With revised natural emissions, ozone concentrations were slightly less sensitive to reducing NOx in the southeastern US than with the current natural emissions due to higher NO from lightning. The revised natural emissions have little impact on modeled PM_2.5 responses to anthropogenic emission reductions. However, there are substantial uncertainties in current representations of natural sources in air quality models and we recommend that further study is needed to refine these representations.     

A New Approach of BioCO2 Fixation by Thermoplastic Processing of Microalgae

Effective sequestration of carbon dioxide (CO₂) by algae reduces greenhouse gases effect on global warming. Algae biomass or residual such as biomeal from algae biofuel processing can be judiciously used for industrial applications such as fertilizer, animal feed, and plastics. Conversion of algae into useful plastic materials can be accomplished by extrusion technology. During algal plastic manufacturing, up to 20% thermoplastic algal blends can be fixated into or encapsulated by a non-biodegradable polymer such as polyolefin, which is known to be resistant to abiotic or biotic degradation. As a result, CO₂ that is captured by algae through photosynthesis is permanently stored in a form of biomass and will not be released back into the atmosphere. The extrusion of microalgae reported in this article is a novel process to sequester CO₂ and at the same time it makes a good use of the algae biomass in plastic manufacturing. Mechanical properties of the thin plastic films containing microalgae are comparable to the neat polyurethane or polyethylene films. Injection molded articles containing microalgae are dimensionally stable. However, a lower tensile strength, especially elongation at break, is observed in comparison to the neat polypropylene.