C/N比和曝气量影响MBR同步硝化反硝化的研究

通过连续运行MBR研究了C/N比和曝气量对同步硝化反硝化的影响,结果表明,在环境温度13～23℃,MLSS为6.0～6.8 g/L,进水NH⁺₄-N浓度50 mg/L,曝气量0.5 m³/h,HRT为6 h实验条件下,总氮去除率随着进水C/N比的增加而增加,在C/N比为6∶1～8∶1时,TN去除率达到79%～89%,低的C/N比抑制反硝化,过高的C/N比增加了碳源补加的成本。改变反应曝气量,当C/N比为6∶1,曝气量为0.4 m³/h时,TN的去除率达到了最大值85%。曝气量过高或过低,TN去除率均下降。并对在不同曝气量下MBR 内的DO 值分布进行了初步研究。     

液化石油气轿车实际道路污染物排放特征

利用PEMS对国2技术LPG出租轿车和汽油轿车的实际道路排放进行测试,基于测试数据对LPG轿车排放特征进行解析,并与汽油轿车的排放因子进行对比分析.结果显示:速度和行驶模式对LPG轿车污染物排放影响明显;LPG轿车CO 2、CO、HC和NOx污染物的实测排放因子分别为(169.5±22.2)、(2.18±2.38)、(...     

环境影响预测中基准值问题的探讨

鉴于目前环境影响预测中基准值取法存在的问题,提出了结合目前通用做法与灰色预测的灰靶方案,该方案使得环境影响预测结果在一定范围内变化,从而更为切合评价实际。     

武汉东湖部分原生动物种类污染值的建立

利用对武汉东湖进行的为期１ 年的原生动物采集及鉴定结果以及同时进行的水质化学测试结果,对所建立的原生动物生物指数进行了验证,表明所得ＣＰＶ与化学综合污染指数呈显著的相关,说明建立的生物指数对淡水水系有广泛的实用性．对汉江中没有观察到的某些原生动物建立了其种类污染值     

DELtatox便携式毒性测试仪在Q—TOX和B—TOX两种模式下应用与探讨

随着经济社会的发展,突发性水质污染事故日趋增多。因此能够快速、准确测定水质状况是环境应急监测的一项重要工作。在一起水厂取水口有人投药打鱼事故中,采用DELtatox便携式毒性测试仪在Q—TOX和B—TOX两种模式下快速检测事发地水质,结果表明快速、高效的检测为此次污染事故的成功处置提供了技术支持,为以后类似突发污染事故的应急监测提供了参考。     

Numerical model of flow and pollutant transportation in non-orthogonal curvilinear coordinates

The planar 2D k-ε double equations‘ turbulence model was adopted and transformed into non-orthogonal curvilinear coordinates. The concentration convection-diffusion was introduced to planar 2D SIMPLEC algorithm of flow in non-orthogonal curvilinear coordinates. The numerical model of pollutant transportation in non-orthogonal curvilinear coordinates was constructed. The model was applied to simulate the flow and pollutant concentration fields. In the testing concentration field, two optimal operations of contamination discharging both along bank and in the centerline at the first bend of the meandering channel were adopted. Comparison with available data showed the model developed was successful, was valuable to engineering application.     

我国水源污染事故风险点定量识别方法

水源事故的频发会对城市供水系统产生威胁,有必要针对供水系统风险进行评估和防控。针对水源事故频发及高发因素定量甄别研究,筛选统计了国内近20年来1 900多起水质突发事故案例,梳理了触发水源水质污染的多种因素,通过构建水源水质安全事故树和贝叶斯网络进行了相互验证分析。结果表明：我国水源污染事故主要因素贡献为依次突然排放(0.466)、污染长期累积(0.242)、交通事故(0.109)等;采用贝叶斯网络计算进行验证,其结果与事故树方法一致性较好。该方法有助于水源污染防控工作中风险点甄别和排序,可为我国饮用水安全保障水平的提升提供支撑。     

PLC控制系统在钢渣热焖工艺中的应用

利用PLC控制系统,实现在钢渣热焖工艺中的恒压供水和钢渣热焖定时定量喷水的自动控制要求,具有国际先进水平,取得了良好的经济效益、社会效益和环境效益.     

Effect of lubricant sulfur on the morphology and elemental composition of diesel exhaust particles

This work investigates the effects of lubricant sulfur contents on the morphology, nanostructure, size distribution and elemental composition of diesel exhaust particle on a light-duty diesel engine. Three kinds of lubricant (LS-oil, MS-oil and HS-oil, all of which have different sulfur contents: 0.182%, 0.583% and 1.06%, respectively) were used in this study. The morphologies and nanostructures of exhaust particles were analyzed using high-resolution transmission electron microscopy (TEM). Size distributions of primary particles were determined through advanced image-processing software. Elemental compositions of exhaust particles were obtained through X-ray energy dispersive spectroscopy (EDS). Results show that as lubricant sulfur contents increase, the macroscopic structure of diesel exhaust particles turn from chain-like to a more complex agglomerate. The inner cores of the core-shell structure belonging to these primary particles change little; the shell thickness decreases, and the spacing of carbon layer gradually descends, and amorphous materials that attached onto outer carbon layer of primary particles increase. Size distributions of primary particles present a unimodal and normal distribution, and higher sulfur contents lead to larger size primary particles. The sulfur content in lubricants directly affects the chemical composition in the particles. The content of C (carbon) decreases as sulfur increases in the lubricants, while the contents of O (oxygen), S (sulfur) and trace elements (including S, Si (silicon), Fe (ferrum), P (phosphorus), Ca (calcium), Zn (zinc), Mg (magnesium), Cl (chlorine) and Ni (nickel)) all increase in particles.     

Arsenic removal from groundwater by acclimated sludge under autohydrogenotrophic conditions

Arsenic in the environment is attracting increasing attention due to its chronic health effects. Although arsenite(As(III)) is generally more mobile and more toxic than arsenate(As(V)), reducing As(V) to As(III) may still be a means for decontamination, because As(III) can be removed from solution by precipitation with sulfide or by adsorption or complexation with other metal sulfides. The performance of As(V) bio-reduction under autohydrogenotrophic conditions was investigated with batch experiments. The results showed that As(V) reduction was a biochemical process while both acclimated sludge and hydrogen were essential. Most of the reduced arsenic remained in a soluble form, although 20% was removed with no addition of sulfate, while 82% was removed when sulfate was reduced to sulfide. The results demonstrated that the reduced arsenic was re-sequestered in the precipitates, probably as arsenic sulfides. Kinetic analysis showed that pseudo first-order kinetics described the bio-reduction process better than pseudo second-order. In particular, the influences of pH and temperature on As(V) reduction by acclimated sludge under autohydrogenotrophic conditions and total soluble As removal were examined. The reduction process was highly sensitive to both pH and temperature, with the optimum ranges of pH 6.5–7.0 and 30–40°C respectively. Furthermore, Arrhenius modeling results for the temperature effect indicated that the As(V) reduction trend was systematic. Total soluble As removal was consistent with the trend of As(V) reduction.