Application of membrane bioreactor technology for wastewater treatment and reuse in the Mediterranean region: Focusing on removal efficiency of non-conventional pollutants

The Mediterranean Region is a semi-arid area whose land is facing serious erosion, causing adverse impacts on agriculture. To improve the water availability, researchers have proposed the reclamation and reuse of treated wastewater. In this paper, we report the main findings of 10 years of research on the efficiencies of a conventional activated sludge process and a submerged membrane bioreactor, with particular emphasis on the removal of non-conventional pollutants. The studies showed that the membrane bioreactor produced a virtually solids-free, high-quality permeate: most nutrients, heavy metals, and persistent organic pollutants were removed, and in particular, dioxins, furans, and polychlorinated biphenyls were typically present at concentrations below the detection limit. Moreover, the total coliforms count decreased by 4–5 log and Escherichia coli was absent from the membrane bioreactor permeate. These results, combined with the continuing reduction of the capital and operating costs for this approach, suggest that membrane bioreactors are an increasingly cost-effective technology to produce treated effluents that are suitable for reuse.     

Geographic distribution and environmental characterization of livestock production systems in Eastern Africa

The central role played by livestock in the livelihoods of rural households in the developing world is seldom fully appreciated by policy makers, development agencies and donors. Knowledge gaps in the geographic distribution and environmental determinants of farming systems, especially if viewed through the livestock lens, compound this problem. We have produced a map of pastoral, agro-pastoral and mixed farming systems across Eastern Africa, by analysing datasets collected in the framework of livelihood analysis. Input data were gathered between 2000 and 2007 by various emergency and development agencies for Djibouti, Eritrea, Kenya, Somalia, Uganda and parts of Ethiopia and Sudan. A quantitative definition of the production systems is adopted, based on the ratio of livestock- to crop-derived income. The resulting livelihood-based map of livestock production systems was compared through correspondence analysis to an alternative livestock production systems map, produced independently from environmental data. Convergence between the two mapping approaches was evident. The geographic distribution of the livestock production systems was also modelled using multivariate analysis of remotely sensed and other geospatial datasets. Models show high statistical accuracy, and were thus used to fill the gaps in the observed distribution of livestock production systems. Finally, selected environmental factors underpinning the systems (agro-climatology, human and livestock populations and land cover) were analysed in detail, enabling the livestock production systems to be characterized in terms of them. The regional scope of the map, as well as its direct link with a vast amount of livelihood information, render it a valuable tool for a range of development and research applications, including those related to global change.     

River pollution from non-point sources: a new simplified method of assessment

Assessment of the pollution of water bodies from non-point sources is a complex data- and time-consuming task. The potential non-point pollution index (PNPI), is a new tool designed to assess the global pressure exerted on rivers and other surface water bodies by different land uses. The main feature of PNPI is the wide availability of its input data. Very detailed input maps, often lacking over many areas, are not needed for PNPI calculation. As a consequence of the input data used, the modelling of physical reality and of processes is heavily simplified. The authors counterbalanced such a simplification using an 'expert system' approach. The system bypasses the accurate representation of the physical reality to assess globally the pollution potential of different land uses according to the judgement of scientists. The scientific community proposes many models for depicting the dynamics of pollutants coming from diffuse sources. Most of them can be grouped into two broad categories: statistical models and physically based models. PNPI belongs to neither of the above-mentioned groups. PNPI is a GIS-based, watershed-scale tool designed to inform decision makers and public opinion about the potential environmental impacts of different land management scenarios. PNPI applies the multicriteria technique to pollutant dynamics and water quality. The pressure exerted on water bodies by diffuse pollution coming from land units is expressed as a function of three indicators: land use, run-off and distance from the river network. They are calculated from land use data, geological maps and a digital elevation model (DEM). The weights given to different land uses and to the three indicators were set according to experts' evaluations and allow calculation of the value of the PNPI for each node of a grid representing the watershed; the higher the PNPI of the cell, the greater the potential impact on the river network. The output of the calculation is presented in the form of maps that highlight areas that are more likely to produce pollution. Last, possibilities, strategies and results of the validation of the PNPI are described. In the authors' view, the explicit link between land use and potential pollution on which PNPI is based, together with its high communication potential, make it particularly interesting for a participatory and integrated approach to land management and environmental protection.     

The impact of artisanal gold mining,ore processing and mineralization on water quality in Marmato,Colombia

Marmato, Colombia, has been an important centre of gold mining since before the first Spanish colonizers arrived in 1536. The Marmato deposit is hosted in a dacite and andesite porphyry stock as sheeted sulphide-rich veinlet systems. The district is currently experiencing a surge in both major mining projects and artisanal mining, driven by sustained high gold prices. Ore from small-scale and artisanal gold mining is processed in numerous small mills (entables) around Marmato, which impact surface water quality through the discharge of milled waste rock slurry, highly alkaline cyanide-treated effluent, and high dissolved metal loads. To investigate the impact of artisanal mining and ore processing, water samples were collected in January 2012 from streams around Marmato. The average dissolved metal concentrations in impacted streams were Zn, 78 mg L^?1; Pb, 0.43 mg L^?1; Cu, 403 µg L^?1 Cd, 255 µg L^?1; As, 235 µg L^?1; Ni, 67 µg L^?1; Co, 55 µg L^?1; Sb, 7 µg L^?1; and Hg, 42 ng L^?1, exceeding World Health Organization drinking water guidelines. In addition, arsenic speciation was conducted in-situ and indicated that 91–95% of inorganic arsenic species is in the form of As(V). Spatial analysis of the data suggests that entables processing ore for artisanal miners are the main contributor to water pollution, with high sediment loads, alkalinity and elevated concentrations of dissolved arsenic, cadmium, mercury and lead, caused by the processing of gold-bearing sulphides in the entables. Geochemical data from surface water were compared to a comprehensive data set of whole rock analyses from drill core and channel samples from the deposit, indicating that the deposit is significantly enriched in gold, silver, lead, zinc, arsenic, antimony, and cadmium compared to crustal averages, which is reflected in the surface water geochemistry. However, elevated mercury levels in surface water cannot be explained by enrichment of mercury in the deposit and strongly suggest that mercury is being added to concentrates during ore processing to amalgamate fine gold.

     

Phytoremediation of Soil Polluted by Nickel Using Agricultural Crops

Soil pollution due to heavy metals is widespread; on the world scale, it involves about 235 million hectares. The objectives of this research were to establish the uptake efficiency of nickel by some agricultural crops. In addition, we wanted to establish also in which part of plants the metal is stored for an eventual use of biomass or for recycling the metal. The experiments included seven herbaceous crops such as: barley (Hordeum vulgaris), cabbage (Brassica juncea), spinach (Spinacea oleracea), sorghum (Sorgum vulgare), bean (Phaseolus vulgaris), tomato (Solanum lycopersicum), and ricinus (Ricinus communis). We used three levels of treatment (150, 300, and 600 ppm) and one control. At the end of the biological cycle of the crops, the different parts of plants, i.e., roots, stems, leaves, fruits, or seeds, were separately collected, oven dried, weighed, milled, and separately analysed. The leaves and stems of spinach showed a very good nickel storage capacity. The ricinus too proved to be a very good nickel storer. The ability of spinach and ricinus to store nickel was observed also in the leaves of cabbage, even if with a lower storage capacity. The bean, barley, and tomato, in decreasing order of uptake and storage capacity, showed a high concentration of nickel in leaves and stems, whereas the sorghum evidenced a lesser capacity to uptake and store nickel in leaves and stems. The bean was the most efficient in storing nickel in fruits or grains. Tomato, sorghum, and barley have shown a storage capacity notably less than bean. The bean appeared to be the most efficient in accumulating nickel in the roots, followed in decreasing order by sorghum, ricinus, and tomato. With regard to the removal of nickel, spinach was the most efficient as it contains the highest level of this metal per gram of dry matter. The ricinus, cabbage, bean, sorghum, barley, and tomato evidenced a progressively decreasing efficiency in the removal of nickel.     

Assessment of Ni accumulation capability by fungi for a possible approach to remove metals from soils and waters

ABSTRACT

Abandoned industrial sites and mines may constitute possible hazards for surrounding environment due to the presence of toxic compounds that may contaminate soils and waters. The possibility to remove metal contaminants, specifically nickel (Ni), by means of fungi was presented exploiting a set of fungal strains isolated from a Ligurian dismissed mine. The achieved results demonstrate the high Ni(II) tolerance, up to 500 mg Ni l^?1, and removal capability of a Trichoderma harzianum strain. This latter hyperaccumulates up to 11,000 mg Ni kg^?1, suggesting its possible use in a bioremediation protocol able to provide a sustainable reclamation of broad contaminated areas.     

Native fungi as metal remediators: Silver myco-accumulation from metal contaminated waste-rock dumps (Libiola Mine,Italy)

ABSTRACT

Metal contamination constitutes a major source of pollution globally. Many recent studies emphasized the need to develop cheap and green technologies for the remediation or reclamation of environmental matrices contaminated by heavy metals. In this context, fungi are versatile organisms that can be exploited for bioremediation activities. In our work, we tested silver (Ag) bioaccumulation capabilities of three microfungal strains (Aspergillus alliaceus Thom & Church, Trichoderma harzianum Rifai, Clonostachys rosea (Link) Schroers, Samuels, Seifert & W. Gams) isolated from a silver polluted site. The aim was to select silver tolerant native strains and test their potential silver uptake. Among the three species tested, T. harzianum was the most efficient strain to tolerate and accumulate silver, showing an uptake capability of 153 mg L^?1 taken at the Ag concentration of 330 mg L^?1. Our study highlights the potential use of native microfungi spontaneously growing in sulphide-rich waste rock dumps, for silver bioaccumulation and bioremediation.     

Options for water storage and rainwater harvesting to improve health and resilience against climate change in Africa

West and East Africa experience high variability of rainfall that is expected to increase with climate change. This results in fluctuations in water availability for food production and other socioeconomic activities. Water harvesting and storage can mitigate the adverse effects of rainfall variability. But past studies have shown that when investments in water storage are not guided by environmental health considerations, the increased availability of open water surface may increase the transmission of water-related diseases. This is demonstrated for schistosomiasis associated with small reservoirs in Burkina Faso, and for malaria in Ethiopia around large dams, small dams, and water harvesting ponds. The concern is that the rush to develop water harvesting and storage for climate change adaptation may increase the risk for already vulnerable people, in some cases more than canceling out the benefits of greater water availability. Taking health issues into account in a participatory approach to planning, design, and management of rainwater harvesting and water storage, as well as considering the full range of water storage options would enable better opportunities for enhancing resilience against climate change in vulnerable populations in sub-Saharan Africa.     

High rate mesophilic, thermophilic, and temperature phased anaerobic digestion of waste activated sludge: a pilot scale study

The paper reports the findings of a two-year pilot scale experimental trial for the mesophilic (35°C), thermophilic (55°C) and temperature phased (65+55°C) anaerobic digestion of waste activated sludge. During the mesophilic and thermophilic runs, the reactor operated at an organic loading rate of 2.2 kgVS/m(3)d and a hydraulic retention time of 20 days. In the temperature phased run, the first reactor operated at an organic loading rate of 15 kgVS/m(3)d and a hydraulic retention time of 2 days while the second reactor operated at an organic loading rate of 2.2 kgVS/m(3)d and a hydraulic retention time of 18 days (20 days for the whole temperature phased system). The performance of the reactor improved with increases in temperature. The COD removal increased from 35% in mesophilic conditions, to 45% in thermophilic conditions, and 55% in the two stage temperature phased system. As a consequence, the specific biogas production increased from 0.33 to 0.45 and to 0.49 m(3)/kgVS(fed) at 35, 55, and 65+55°C, respectively. The extreme thermophilic reactor working at 65°C showed a high hydrolytic capability and a specific yield of 0.33 g COD (soluble) per gVS(fed). The effluent of the extreme thermophilic reactor showed an average concentration of soluble COD and volatile fatty acids of 20 and 9 g/l, respectively. Acetic and propionic acids were the main compounds found in the acids mixture. Because of the improved digestion efficiency, organic nitrogen and phosphorus were solubilised in the bulk. Their concentration, however, did not increase as expected because of the formation of salts of hydroxyapatite and struvite inside the reactor.