Modeling the costs and benefits of dam construction from a multidisciplinary perspective

Although the benefits of dam construction are numerous, particularly in the context of climate change and growing global demand for electricity, recent experience has shown that many dams have serious negative environmental, human, and political consequences. Despite an extensive literature documenting the benefits and costs of dams from a single disciplinary perspective, few studies have simultaneously evaluated the distribution of biophysical, socio-economic, and geopolitical implications of dams. To meet the simultaneous demands for water, energy, and environmental protection well into the future, a broader view of dams is needed. We thus propose a new tool for evaluating the relative costs and benefits of dam construction based on multi-objective planning techniques. The Integrative Dam Assessment Modeling (IDAM) tool is designed to integrate biophysical, socio-economic, and geopolitical perspectives into a single cost/benefit analysis of dam construction. Each of 27 different impacts of dam construction is evaluated both objectively (e.g., flood protection, as measured by RYI years) and subjectively (i.e., the valuation of said flood protection) by a team of decision-makers. By providing a visual representation of the various costs and benefits associated with two or more dams, the IDAM tool allows decision-makers to evaluate alternatives and to articulate priorities associated with a dam project, making the decision process about dams more informed and more transparent. For all of these reasons, we believe that the IDAM tool represents an important evolutionary step in dam evaluation.     

Prioritization of Ecosystem Services Research: Tampa Bay Demonstration Project

The Tampa Bay Ecosystem Services Demonstration Project (TBESDP) is part of the U.S. Environmental Protection Agency’s Ecosystem Services Research Program. The principal objectives of TBESDP are to (1) quantify the ecosystem services of the Tampa Bay watershed, (2) determine the value of ecosystem services to society, (3) predict the supply of ecosystem services under future scenarios of population growth and climate change, and (4) apply this knowledge through models and tools that will support the best informed environmental decisions possible. The scope and complexity of this project required intensive effort to establish which services can be quantified by applying existing models, data, and scientific literature and which services will require supporting research. Research priorities were assessed by: (1) developing and refining conceptual models of major ecosystems in the Tampa Bay region, (2) gathering input from stakeholders about the relative importance and values of various ecosystem services, (3) preparing and reviewing a bibliometric analysis of the volume of scientific literature relevant to the ecosystems and services of interest, and (4) evaluating an integrated analysis of importance, value, and availability of scientific information. This analysis led us to focus on two research priorities, seagrass-habitat functions as support for fishery production, and wetlands as regulators of water quality.     

Prioritizing prevention opportunities in the Washington State construction industry, 2003-2007

Objective

This study compares construction industry groups in Washington State by injury severity and cost, and ranks industry groups according to potential for prevention.

Methods

All Washington State workers' compensation compensable claims with date of injury between 2003 and 2007 were classified into North American Industrial Classification System (NAICS) industry groups. Claims were then aggregated by injury type and industry groups were ranked according to a prevention index (PI). The PI is the average of the rank orders of the claim count and the claim incidence rate. A lower PI indicates a higher need for prevention activities. The severity rate was calculated as the number of days of time loss per 10,000 full-time equivalents (FTEs).

Results

For all injury types, construction industry groups occupy 7 of the top 15 PI ranks in Washington State. The severity rate among construction industry groups was twice that for non-construction groups for all injury types. Foundation, structure, and building exterior contractors (NAICS 2381) ranked highest in prevention potential and severity among construction industry groups for most common injury types including falls from elevation, fall on same level, struck by/against, and musculo-skeletal disorders of the neck, back, and upper extremity (WMSDs). Median claim costs by injury type were generally higher among construction industry groups.

Conclusions

The construction industry in Washington State has a high severity rate and potential for prevention. The methods used for characterizing these industry groups can be adapted for comparison within and between other industries and states.

Impact on Industry

These data can be used by industry groups and employers to identify higher cost and higher severity injury types. Knowledge about the relative frequencies and costs associated with different injury types will help employers and construction industry associations make better informed decisions about where prevention efforts are most needed and may have the greatest impact. The results of this study can also be used by industry stakeholders to cooperatively focus on high cost and high severity injuries and explore best practices, interventions, and solutions as demonstrated by efforts to prevent musculoskeletal disorders in masonry (Entzel, Albers, & Welch, 2007). Initiating construction industry groups to focus on high cost and high severity injuries may also help prevent other types of injuries.     

Solid wastes from the enzyme production as a potential biosorbent to treat colored effluents containing crystal violet dye

Environmental Science and Pollution Research - Sugarcane bagasse, a largely available waste worldwide, was submitted to solid-state fermentation (SSF) using the fungus Metarhizium anisopliae,...     

Regional planning acceptance by residents of Northern New York,USA

This study compares the effectiveness of two regional planning agencies in terms of public support for various planning activities. The Adirondack Park Agency and the Temporary State Commission on Tug Hill have fundamentally different approaches to planning. The Adirondack Park Agency has implemented a restrictive regulatory program with little citizen participation by Adirondack residents. The Tug Hill Commission has implemented an advisory and coordinating program with an emphasis on public input. Residents of two towns in each region were surveyed to determine environmental concern and support for regional planning activities. Respondents from both regions favored a planning agency that incorporates citizen input; controls air, water, and toxic waste pollution; and develops recreation areas. They strongly opposed an agency that regulates private land-use. Basic demographic characteristics and levels of environmental concern were similar in all four towns, but receptivity to various planning activities was consistently greater among residents of the Tug Hill Region. Paired comparisons of the four towns demonstrated no differences between towns of the same region and significant differences between towns of different regions. Public support for regional planning is greater in the Tug Hill Region than in the Adirondack Park.     

Experimental verification of a model describing solid phase microextraction (SPME) of freely dissolved organic pollutants in sediment porewater

To verify a theoretical mass balance and multiple compartment partitioning model developed to predict freely dissolved concentrations (FDCs) of hydrophobic organic chemicals (HOCs) using negligible depletion-solid phase microextraction (nd-SPME), a series of sediment slurry experiments were performed using disposable poly(dimethyl)siloxane (PDMS) coated-SPME fibers and (14)C-radiolabeled HOC analogs. First, pre-calibration of disposable PDMS coated fibers for four model compounds (phenanthrene, PCB 52, PCB 153 and p,p'-DDE) with good precision (PCB 52>PCB 153, and the measured and predicted C(pw) values were not substantially different from empirically determined values except for p,p'-DDE.     

Application of Cordia trichotoma sawdust as an effective biosorbent for removal of crystal violet from aqueous solution in batch system and fixed-bed column

Environmental Science and Pollution Research - In this work, for the first time, Cordia trichotoma sawdust, a residue derived from noble wood processing, was applied as an alternative biosorbent...     

Regional assessment of marine and estuarine sediment toxicity in Southern California, USA

Sediment toxicity was investigated at 222 stations in the Southern California Bight (SCB) during 2008. This represented the first time that assessment methods established by California's new Sediment Quality Objectives program were employed in a survey of this scale. The goal was to determine the extent and magnitude of sediment toxicity in the SCB, how toxicity compared among specific environments, and whether toxicity has changed over the last decade. Two toxicity tests were used: the 10-day amphipod whole sediment survival test with Eohaustorius estuarius and a 48-h embryo development test with the mussel Mytilus galloprovincialis exposed at the sediment–water interface. Less than 1 % of the area of the SCB was found to be toxic to the amphipod test. No toxicity was found in offshore stations, but 14 % of embayment areas were toxic to the amphipods. The mussel test identified 13 % of the embayment areas to be toxic. Estuary and marina locations had the greatest areal extent of toxicity for both tests. The two toxicity methods agreed that sediments were not toxic at over half of the stations tested. The mussel test showed a greater magnitude of response than the amphipod. Sediment toxicity was shown to have declined in both extent and magnitude from levels measured in 1998 and 2003.