Accurate sampling of PCDD/F in high temperature flue-gas using cooled sampling probes

In a laboratory-scale combustion reactor, flue-gas samples were collected at two temperatures in the post-combustion zone, 700 °C and 400 °C, using two different water-cooled sampling probes. The probes were the cooled probe described in the European Standard method EN-1948:1, referred to as the original probe, and a modified probe that contained a salt/ice mixture to assist the cooling, referred to as the sub-zero probe. To determine the efficiency of the cooling probes, internal temperature measurements were recorded at 5 cm intervals inside the probes. Flue-gas samples were analyzed for polychlorinated dibenzo-p-dioxin and dibenzofurans (PCDD/Fs). Samples collected at 700 °C using the original cooling probe showed higher concentrations of PCDD/Fs compared to samples collected using the sub-zero probe. No significant differences were observed between samples collected at 400 °C. The results indicated that artifact formation of PCDD/Fs readily occurs during flue-gas sampling at high temperatures if the cooling within the probe is insufficient, as found for the original probe at 700 °C. It was also shown that this problem could be alleviated by using probes with an enhanced cooling capacity, such as the sub-zero probe.Although this may not affect samples collected for regulatory purposes in exit gases, it is of great importance for research conducted in the high-temperature region of the post-combustion zone.     

Characterisation and fingerprinting of PCBs in flue gas and ash from waste incineration and in technical mixtures

Congener patterns of mono- to deca-chlorinated biphenyls (PC1-10B) were evaluated in (a) waste incineration flue gases collected in the post-combustion zone of a laboratory-scale fluidized-bed reactor, (b) ashes from two different MSW incineration plants, and (c) published data of eight Aroclor formulations. The congener patterns of the flue gases, ashes, and Aroclor mixtures clearly differed from each other, likely reflecting differences in formation pathways. The flue gas congener patterns were largely dominated by the least chlorinated congeners, whereas the ashes displayed more evenly distributed patterns. The most abundant congeners indicated a preference for 3,3',4,4'-oriented substitution, which may be related to de novo-type formation involving perylene. Principal component analysis confirmed that congener patterns differed among the three matrices and also distinguished flue gases collected at 200 °C from those collected at 300 °C and 450 °C. This distinction could be partly explained by the degree of chlorination, although the substitution status of the ortho-position, and substitution in the 3,3',4,4'-positions also seemed to be influential. Injecting biphenyl into the post-combustion zone of the reactor did not alter the patterns, indicating that availability of the backbone structure is not a limiting factor for PCB formation.     

Handling the phosphorus paradox in agriculture and natural ecosystems: Scarcity,necessity, and burden of P

This special issue of Ambio compiles a series of contributions made at the 8th International Phosphorus Workshop (IPW8), held in September 2016 in Rostock, Germany. The introducing overview article summarizes major published scientific findings in the time period from IPW7 (2015) until recently, including presentations from IPW8. The P issue was subdivided into four themes along the logical sequence of P utilization in production, environmental, and societal systems: (1) Sufficiency and efficiency of P utilization, especially in animal husbandry and crop production; (2) P recycling: technologies and product applications; (3) P fluxes and cycling in the environment; and (4) P governance. The latter two themes had separate sessions for the first time in the International Phosphorus Workshops series; thus, this overview presents a scene-setting rather than an overview of the latest research for these themes. In summary, this paper details new findings in agricultural and environmental P research, which indicate reduced P inputs, improved management options, and provide translations into governance options for a more sustainable P use.     

Restoration of rivers used for timber floating: effects on riparian plant diversity.

Fluvial processes such as flooding and sediment deposition play a crucial role in structuring riparian plant communities. In rivers throughout the world, these processes have been altered by channelization and other anthropogenic stresses. Yet despite increasing awareness of the need to restore natural flow regimes for the preservation of riparian biodiversity, few studies have examined the effects of river restoration on riparian ecosystems. In this study, we examined the effects of restoration in the Ume River system, northern Sweden, where tributaries were channelized to facilitate timber floating in the 19th and early 20th centuries. Restoration at these sites involved the use of heavy machinery to replace instream boulders and remove floatway structures that had previously lined stream banks and cut off secondary channels. We compared riparian plant communities along channelized stream reaches with those along reaches that had been restored 3-10 years prior to observation. Species richness and evenness were significantly increased at restored sites, as were floodplain inundation frequencies. These findings demonstrate how river restoration and associated changes in fluvial disturbance regimes can enhance riparian biodiversity. Given that riparian ecosystems tend to support a disproportionate share of regional species pools, these findings have potentially broad implications for biodiversity conservation at regional or landscape scales.     

In situ anion diffusion experiments using radiotracers

Diffusion experiments in compacted bentonite have been carried out in situ using the borehole laboratory CHEMLAB. The "ordinary" anion iodide and the redox-sensitive pertechnetate ion have been investigated. In spite of strongly reducing groundwater conditions, technetium was found to diffuse mostly unreduced as TcO4-, although in some spots in the compacted clay, the activity was significantly higher, which may be explained by reduction of some TcO4- by iron-containing minerals in the bentonite. The measured concentration profiles in the clay cannot be accommodated by assuming one single diffusion process. The experimental data are modeled assuming two diffusion paths, intralamellar diffusion and diffusion in external water. The apparent diffusivity for the intralamellar diffusion was found to be 8.6 x 10(-11) m2 s(-1) for iodide with a capacity factor of 0.1, while the apparent diffusivity for the diffusion in external water was found to be 5 x 10(-14) m2 s(-1) with alpha=2.26. The corresponding values for Tc were found to be Da= 6 x 10(-11) m2 s(-1), alpha=0.1 and Da= 1 x 10(-13) m2 s(-1), alpha=0.46, respectively. The diffusion constants and capacity factors obtained in this study are in accordance with data from laboratory experiments.     

Major challenges of integrating agriculture into climate change mitigation policy frameworks

Taking the European Union (EU) as a case study, we simulate the application of non-uniform national mitigation targets to achieve a sectoral reduction in agricultural non-carbon dioxide (CO₂) greenhouse gas (GHG) emissions. Scenario results show substantial impacts on EU agricultural production, in particular, the livestock sector. Significant increases in imports and decreases in exports result in rather moderate domestic consumption impacts but induce production increases in non-EU countries that are associated with considerable emission leakage effects. The results underline four major challenges for the general integration of agriculture into national and global climate change mitigation policy frameworks and strategies, as they strengthen requests for (1) a targeted but flexible implementation of mitigation obligations at national and global level and (2) the need for a wider consideration of technological mitigation options. The results also indicate that a globally effective reduction in agricultural emissions requires (3) multilateral commitments for agriculture to limit emission leakage and may have to (4) consider options that tackle the reduction in GHG emissions from the consumption side.     

Achieving forest carbon information with higher certainty: A five-part plan

International negotiations on the inclusion of land use activities into an emissions reduction system for the UN Framework Convention on Climate Change (UNFCCC) have been partially hindered by the technical challenges of measuring, reporting, and verifying greenhouse gas (GHG) emissions and the policy issues of leakage, additionality, and permanence. This paper outlines a five-part plan for estimating forest carbon stocks and emissions with the accuracy and certainty needed to support a policy for Reducing Emissions from Deforestation and forest Degradation, forest conservation, sustainable management of forests, and enhancement of forest carbon stocks (the REDD-plus framework considered at the UNFCCC COP-15) in developing countries. The plan is aimed at UNFCCC non-Annex 1 developing countries, but the principles outlined are also applicable to developed (Annex 1) countries. The parts of the plan are: (1) Expand the number of national forest carbon Measuring, Reporting, and Verification (MRV) systems with a priority on tropical developing countries; (2) Implement continuous global forest carbon assessments through the network of national systems; (3) Achieve commitments from national space agencies for the necessary satellite data; (4) Establish agreed-on standards and independent verification processes to ensure robust reporting; and (5) Enhance coordination among international and multilateral organizations.