A case study of spatial variation and enrichment of selected elements in ambient particulate matter around a large coal-fired power station in Central India

The dominant use of coal in power sectors has been associated with adverse environmental impacts. Ambient air monitoring for the two size fractions of particulate matter, respirable suspended particulate matter (RSPM) and non-respirable suspended particulate matter (NRSPM) in the downwind and upwind directions of a large coal-fired power station in central India, was carried out. Collected samples of ambient particulate matter were analysed atomic absorption spectrophotometrically for 15 elements. Spatial variability in elemental composition of RSPM and NRSPM and the degree of enrichment of these toxic metals in RSPM were investigated. A significant spatial variability for the elements in RSPM and NRSPM and higher degrees of enrichment of the elements were observed.     

Solubilisation effect of spent wash on oxide-ores of manganese and iron

Samples of iron ore (haematite) and manganese ore (pyrolusite) of known compositions were equilibrated with aliquots of analysed sample of spent wash. The concentrations of iron(II), iron(III), complexed iron, manganese(II) ions and complexed Mn-ions were determined after increasing durations. One litre of the spent wash was found to extract out 141 mg of total iron and 161 mg of total manganese. In case of iron, the predominance was of iron(II) (92%), whereas in case of manganese it was of the complexed form (95%).     

Rate evaluation of marble damage by SO2-acidity in the vicinity of stacks

A laboratory modelling for the assessment of damage to marble by the SO₂-acidity in the vicinity of stacks has been devised. The modelling is based on the role of metal oxide particulates (also emitted by smoke-stacks) which catalytically convert SO₂ to SO₃ forming H₂SO₄ (in presence of water), which has an excessively high selectivity, compared with HNO₃, for corroding marble. The requisites of the modelling are: (1) determination of composition of the marble, (2) immersion of samples of marble blocks (after measurement of surface areas) in H₂SO₄ solutions of known concentrations, maintaining pH and temperature at their initial values, (3) determination of concentrations of Ca and Mg (major components of marble) in the leachate, and thereby evaluating the mass loss of the marble, in terms of mg marble cm^–2 day^–1, for each level of H₂S0₄ concentration, (4) application of derived data for evaluation of duration (in years) for the decay of 1 cm thickness of marble block by the process of surface corrosion. From the modelling, it was found that the duration for the damage of 1 cm thickness of the marble sample used here by SO₂ acidities of 1, 5, 10, 50 and 100 ppm are 83.01, 69.02, 31.24, 8.19 and 4.31 years respectively.     

Toxic metals status in human blood and breast milk samples in an integrated steel plant environment in Central India

Owing to its unique nutritional and immunological characteristics, human milk is the most important food source for infants. Breast milk can, however, also be a pathway of maternal excretion of toxic elements. Selected toxic elements (As, Pb, Mn,a Hg and Cd) were determined in human breast milk and blood samples obtained from 120 subjects related to an integrated steel plant environment located in central India. Samples of breast milk and blood from subjects living outside the steel plant environment were also analyzed for comparative study. Higher levels of these toxic elements were found in blood samples as compared to breast milk samples. Plant workers showed the higher presence of these metals in their breast milk and blood samples compared to the residents of the area and the subjects living outside the industrial environment, respectively. Mn, Pb and Hg have shown a higher tendency to associate with blood and breast milk than As and Cd. The order of occurrence of these metals in blood and milk samples thus found is Mn > Pb > Hg > As > Cd.     

Source apportionment of personal exposure of fine particulates among school communities in India

Source contribution estimates (SCE) of school community personal Respirable Particulate Matter (RPM) have been investigated. Reported relationships of personal RPM with Ambient-outdoors and indoor RPM levels have given the concept of defining the sources of personal exposure. Ambient-outdoors, indoors, soils and local road- traffic dusts were identified as main routes and principal sources of fine particulates at personal exposure levels. Fifteen subjects (05 from each of three schools) were selected from previous conducted study of interrelationships among classified atmospheric receptors in theses schools located in Bhilai-Durg, District Durg, India. Samples of RPM collected from identified receptors and sources were analyzed for selected chemical constituents and the chemical data has been utilized in preparation of source-receptor profiles. Chemical mass balance (CMB8) model has been used for source apportionment study. Major dominating source is ambient-outdoors in case of school located near to steel plant downwind. Indoors and road-traffic dusts have also played dominating role in case of school located near to National Highways. Indoor ventilation properties have played an important role in source contribution estimates.     

Temporal and spatial variations of PM2.5 organic and elemental carbon in Central India

Environmental Geochemistry and Health - This study describes spatiotemporal patterns from October 2015 to September 2016 for PM2.5 mass and carbon measurements in rural (Kosmarra), urban (Raipur),...     

A case study of spatial variation and enrichment of selected elements in ambient particulate matter around a large coal-fired power station in Central India

The dominant use of coal in power sectors has been associated with adverse environmental impacts. Ambient air monitoring for the two size fractions of particulate matter, respirable suspended particulate matter (RSPM) and non-respirable suspended particulate matter (NRSPM) in the downwind and upwind directions of a large coal-fired power station in central India, was carried out. Collected samples of ambient particulate matter were analysed atomic absorption spectrophotometrically for 15 elements. Spatial variability in elemental composition of RSPM and NRSPM and the degree of enrichment of these toxic metals in RSPM were investigated. A significant spatial variability for the elements in RSPM and NRSPM and higher degrees of enrichment of the elements were observed.     

PM<Subscript>2.5</Subscript> pollution from household solid fuel burning practices in Central India: 2. Application of receptor models for source apportionment

USEPA’s UNMIX, positive matrix factorization (PMF) and effective variance-chemical mass balance (EV-CMB) receptor models were applied to chemically speciated profiles of 125 indoor PM_2.5 measurements, sampled longitudinally during 2012–2013 in low-income group households of Central India which uses solid fuels for cooking practices. Three step source apportionment studies were carried out to generate more confident source characterization. Firstly, UNMIX6.0 extracted initial number of source factors, which were used to execute PMF5.0 to extract source-factor profiles in second step. Finally, factor analog locally derived source profiles were supplemented to EV-CMB8.2 with indoor receptor PM_2.5 chemical profile to evaluate source contribution estimates (SCEs). The results of combined use of three receptor models clearly describe that UNMIX and PMF are useful tool to extract types of source categories within small receptor dataset and EV-CMB can pick those locally derived source profiles for source apportionment which are analog to PMF-extracted source categories. The source apportionment results have also shown three fold higher relative contribution of solid fuel burning emissions to indoor PM_2.5 compared to those measurements reported for normal households with LPG stoves. The previously reported influential source marker species were found to be comparatively similar to those extracted from PMF fingerprint plots. The comparison between PMF and CMB SCEs results were also found to be qualitatively similar. The performance fit measures of all three receptor models were cross-verified and validated and support each other to gain confidence in source apportionment results.     

Spatial and temporal variation of mercury load in surface water and sediments around an integrated steel plant in India

Coal burning in the steel industry is the chief source of mercury presence in surrounding environment. About 20 water-storage ponds and three natural water streams are located in adjoining areas of an integrated steel plant in Bhilai, India. Hundreds of hospital admissions with chronic ailments due to hazardous emissions from the steel industry are frequently reported. Many of these ailments are related to reported mercury-poisoning diseases. Measurements of mercury levels in various environmental matrices around this industrial area was started early in the 1990s. From 1990–1995, few environmental samples were analyzed for mercury content but from 1995 onwards, comprehensive assessment of mercury load along with other toxic metals in various environmental matrices were begun. This work synthesizes and compares data of mercury in the surface water from three major field programs, in 1997, 2002, and 2006. The focus is on both spatial and temporal variation. In the present survey (2006), mercury levels are significantly higher compared to subsequent surveys and have shown 10–18 times higher values compared to 2001 and 1997 surveys. The differences in Hg levels between downwind and other sites in three survey programs are found to be in order: 1997 > 2001 > 2006. Regression between water and sediment mercury levels has shown variation in correlation values and higher in winter season.     

Emission of volatile organic compounds from religious and ritual activities in India

Worshipping activity is a customary practice related with many religions and cultures in various Asian countries, including India. Smoke from incense burning in religious and ritual places produces a large number of health-damaging and carcinogenic air pollutants include volatile organic compounds (VOCs) such as formaldehyde, benzene, 1,3 butadiene, styrene, etc. This study evaluates real-world VOCs emission conditions in contrast to other studies that examined emissions from specific types of incense or biomass material. Sampling was conducted at four different religious places in Raipur City, District Raipur, Chhattisgarh, India: (1) Hindu temples, (2) Muslim graveyards (holy shrines), (3) Buddhist temples, and (4) marriage ceremony. Concentrations of selected VOCs, respirable particulate matter (aerodynamic diameter, <5 μm), carbon dioxide, and carbon monoxide were sampled from the smoke plumes. Benzene has shown highest emission factor (EF) among selected volatile organic compounds in all places. All the selected religious and ritual venues have shown different pattern of VOC EFs compared to laboratory-based controlled chamber studies.