Influence of agricultural activities, forest fires and agro-industries on air quality in Thailand

Annual and monthly-based emission inventories in northern, central and north-eastern provinces in Thailand, where agriculture and related agro-industries are very intensive, were estimated to evaluate the contribution of agricultural activity, including crop residue burning, forest fires and related agro-industries on air quality monitored in corresponding provinces. The monthly-based emission inventories of air pollutants, or, particulate matter (PM), NOx and SO₂, for various agricultural crops were estimated based on information on the level of production of typical crops: rice, corn, sugarcane, cassava, soybeans and potatoes using emission factors and other parameters related to country-specific values taking into account crop type and the local residue burning period. The estimated monthly emission inventory was compared with air monitoring data obtained at monitoring stations operated by the Pollution Control Department, Thailand (PCD) for validating the estimated emission inventory. The agro-industry that has the greatest impact on the regions being evaluated, is the sugar processing industry, which uses sugarcane as a raw material and its residue as fuel for the boiler. The backward trajectory analysis of the air mass arriving at the PCD station was calculated to confirm this influence. For the provinces being evaluated which are located in the upper northern, lower northern and northeast in Thailand, agricultural activities and forest fires were shown to be closely correlated to the ambient PM concentration while their contribution to the production of gaseous pollutants is much less.     

Degradation of pentachlorophenol in a contaminated soil suspension using hybrid catalysts prepared via urea�Cformaldehyde polycondensation between iron(III)-tetrakis(p-hydroxyphenyl)porphyrin and humic acid

Hybrid catalysts were synthesized by attaching iron(III)-tetrakis(p-hydroxyphenyl)porphyrin (FeTPP(OH)₄) to humic acid (HA) via urea–formaldehyde polycondensation. FTIR spectra of the prepared catalysts indicated that the catalysts prepared via urea–formaldehyde polycondensation contained cross-links between the phenolic groups of FeTPP(OH)₄ and HA, which contains aliphatic amine functional groups. The prepared catalysts were examined for their ability to catalyze the oxidative degradation of pentachlorophenol (PCP) in a contaminated soil suspension. The levels of PCP degradation and dechlorination for the hybrid catalysts were significantly higher than those for the non-modified catalyst, FeTPP(OH)₄.     

Respiratory tract retention of inhaled air pollutants: Report 1 : Mercury absorption by inhaling through the nose and expiring through the mouth at various concentrations

To study atmospheric mercury absorption in human respiratory passage-ways, mercury in expired air was measured in three different states of breathing: steady breathing, deep breathing and breath held after inspiration.In this study, air containing mercury was inhaled through the nose and expired through the mouth. The concentration of mercury in the exhaled air was determined by the technique of gold-amalgam trapping, heat vaporization, and flameless atomic absorption measurement.The subjects were 13 male adults, aged 25–62 years, and 38 cases were observed. Four different concentrations of mercury, 1–3, 4–6, 10–11, and 20–30 μg/m³ were used, and absorption for each was determined. When the concentration was 1–3 μg/m₃, the absorption was 74–92%, the average being 82.5%. At concentrations of 4–6, 10–11, and 20–30 μg/m₃, the absorption was 76.6–100%, 75.5–99.2%, and 79.9–95.9% respectively, and the average was 88.8%, 85.2%, and 87.7% respectively.A slightly higher rate of mercury absorption was observed in deep breathing than in steady breathing, and when expiration was suppressed for some time after inspiration, the rate increased remarkably to 97.4–99.7%. Prolonged retention of inhaled air containing mercury in the respiratory tract is believed to have caused the increased absorption.     

Removal of Cr(VI) from contaminated soil by electrokinetic remediation

A new process for the removal of hexavalent chromium [Cr(VI)] contaminated soil is described. The process provides for an efficient removal of anionic chemicals from contaminated soils. Chromate anions were removed from the soil to the anodic reservoir by the moving force of electromigration. In this process, the chromate anions that accumulate in the anodic reservoir are simultaneously eliminated by using a column packed adsorbent. The adsorbent (immobilized tannin) used was chemically incorporated into cellulose. Cr(VI) was found to be adsorbed to this adsorbent efficiently. In the electrokinetic process, the pH of the aqueous solution in the anodic reservoir was decreased by the electrolysis of water. In the present study, the pH of the solution in the anodic reservoir is maintained at pH 6 by the addition of an aqueous alkaline solution during the electrokinetic process. The advantage of pH control is that it promotes the release of Cr(VI) from the soil by electromigration, thus permitting the maximum adsorption of Cr(VI) on the immobilized tannin. Simultaneous collection of Cr(VI) from the anodic reservoir leads to the protection from secondary contamination with Cr(VI).     

Finite element analysis of knee injury risks in car-to-pedestrian impacts

In vehicle-pedestrian collisions, lower extremities of pedestrians are frequently injured by vehicle front structures. In this study, a finite element (FE) model of THUMS (total human model for safety) was modified in order to assess injuries to a pedestrian lower extremity. Dynamic impact responses of the knee joint of the FE model were validated on the basis of data from the literature. Since in real-world accidents, the vehicle bumper can impact the lower extremities in various situations, the relations between lower extremity injury risk and impact conditions, such as between impact location, angle, and impactor stiffness, were analyzed. The FE simulation demonstrated that the motion of the lower extremity may be classified into a contact effect of the impactor and an inertia effect from a thigh or leg. In the contact phase, the stress of the bone is high in the area contacted by the impactor, which can cause fracture. Thus, in this phase the impactor stiffness affects the fracture risk of bone. In the inertia phase, the behavior of the lower extremity depends on the impact locations and angles, and the knee ligament forces become high according to the lower extremity behavior. The force of the collateral ligament is high compared with other knee ligaments, due to knee valgus motions in vehicle-pedestrian collisions.     

EFFECTS OF SELECTED HERBICIDES ON BACTERIAL POPULATIONS IN NONTREATED AND TREATED WATER1

ABSTRACT: Bacterial populations in nontreated and herbicide-treated waters were subjected to three different herbicides. Diuron, dichlobenil, and diquat were added (100 mg/l) to water samples from two fresh water lakes and two herbicide-treated ponds. Total numbers of bacteria were monitored. Bacterial populations in fresh lake water decreased after herbicide additions; however, final populations were significantly greater than the controls. Similar observations were recorded for bacteria in dichlobenil- and diuron-treated waters. Selective enrichment is probably expressed in these experiments.     

Mitigation of peroxidative stress for barley exposed to cadmium in the presence of water-extractable organic matter from compost-like materials

The effects of water-extractable organic matter (WEOM) from compost-like materials on peroxidative stress were investigated for hydroponic culture of barley exposed to Cd. In the presence of WEOM, lipoxygenase activity and malondialdehyde, indices of peroxidative stress in barley, were significantly reduced, compared to those with Cd alone (5 μM) for a 30-d culture (p < 0.05). In addition, Cd uptake in the presence of WEOM samples was significantly lower than that in their absence (p < 0.05). These results indicate that the addition of WEOM can be effective in mitigating the peroxidative stress in barley exposed to Cd. Of the total Cd in the solution, 7–8% was complexed with WEOM, indicating that the complexation of Cd with WEOM is a minor factor in reducing Cd-induced stress in barley. The WEOM sample was purified by cation-exchange column and ultrafiltration to remove the nutrient minerals, such as Ca, Mg and Fe. When the purified WEOM was employed for hydroponic culture in the presence of Cd, significant decreases in peroxidative stress and Cd uptake were observed (p < 0.05). These results show that the organic components in WEOM contribute to the mitigation of peroxidative stress in barley exposed to Cd.     

Influence of calcium chloride on the thermal behavior of heavy and alkali metals in sewage sludge incineration

In order to separate and reuse heavy and alkali metals from flue gas during sewage sludge incineration, experiments were carried out in a pilot incinerator. The experimental results show that most of the heavy and alkali metals form condensed phase at temperature above 600 degrees C. With the addition of 5% calcium chloride into sewage sludge, the gas/solid transformation temperature of part of the metals (As, Cu, Mg and Na) is evidently decreased due to the formation of chloride, while calcium chloride seems to have no significant influence on Zn and P. Moreover, the mass fractions of some heavy and alkali metals in the collected fly ash are relatively high. For example, the mass fractions for Pb and Cu in the fly ash collected by the filter are 1.19% and 19.7%, respectively, which are well above those in lead and copper ores. In the case of adding 5% calcium chloride, the heavy and alkali metals can be divided into three groups based on their conversion temperature: Group A that includes Na, Zn, K, Mg and P, which are converted into condensed phase above 600 degrees C; Group B that includes Pb and Cu which solidify when the temperature is above 400 degrees C; and Group C that includes As, whose condensation temperature is as low as 300 degrees C.