Potential bioremediation of mercury-contaminated substrate using filamentous fungi isolated from forest soil

The use of filamentous fungi in bioremediation of heavy metal contamination has been developed recently. This research aims to observe the capability of filamentous fungi isolated from forest soil for bioremediation of mercury contamination in a substrate. Six fungal strains were selected based on their capability to grow in 25 mg/L Hg2+-contaminated potato dextrose agar plates. Fungal strain KRP1 showed the highest ratio of growth diameter, 0.831, thus was chosen for further observation.Identification based on colony and cell morphology carried out by 18S rRNA analysis gave a 98%match to Aspergillus flavus strain KRP1. The fungal characteristics in mercury(Ⅱ) contamination such as range of optimum pH, optimum temperature and tolerance level were 5.5–7 and 25–35℃ and 100 mg/L respectively. The concentration of mercury in the media affected fungal growth during lag phases. The capability of the fungal strain to remove the mercury(Ⅱ) contaminant was evaluated in 100 mL sterile 10 mg/L Hg2+-contaminated potato dextrose broth media in 250 mL Erlenmeyer flasks inoculated with 108spore/mL fungal spore suspension and incubation at 30℃ for 7 days. The mercury(Ⅱ) utilization was observed for flasks shaken in a 130 r/min orbital shaker(shaken) and nonshaken flasks(static) treatments. Flasks containing contaminated media with no fungal spores were also provided as control. All treatments were done in triplicate. The strain was able to remove 97.50%and 98.73% mercury from shaken and static systems respectively. A. flavus strain KRP1 seems to have potential use in bioremediation of aqueous substrates containing mercury(Ⅱ) through a biosorption mechanism.     

Removal of hexavalent chromium from water by Z-scheme photocatalysis using TiO2 (rutile) nanorods loaded with Au core–Cu2O shell particles

All-solid-state Z-scheme photocatalysts, containing Cu₂O, TiO₂ (rutile), and Au as the electron mediator, were prepared and applied to the reduction of Cr(VI) in aqueous solutions. The Cu₂O–Au–TiO₂ composites were prepared by loading Au core–Cu₂O shell hemisphere particles on TiO₂ (rutile) nanorods using a two-step photocatalytic deposition process. Under ultraviolet–visible (UV–vis) light illumination, the Cu₂O–Au–TiO₂ composites exhibited higher photocatalytic Cr(VI) reduction activities than those exhibited by single TiO₂ (rutile) and Cu₂O. In this reaction, a precipitate containing Cr, which was considered to be Cr(OH)₃, was deposited site-selectively on the Au core–Cu₂O shell particles of the composites, indicating that the reduction site of the composite was Cu₂O, and the reaction proceeded according to the Z-scheme. The Cu₂O–Au–TiO₂ composites also exhibited photocatalytic activity under visible light illumination. The oxidation state of Cu in the Cu₂O–Au–TiO₂ composite gradually changed from Cu(I) to Cu(II) during the photocatalytic Cr(VI) reduction. However the composite maintained its high photocatalytic performance even after oxidation. The role of Au in the Cu₂O–Au–TiO₂ composite was examined by comparing the properties of the Cu₂O–Au–TiO₂ composite with those of the Cu₂O–TiO₂ composite prepared via direct Cu₂O deposition on TiO₂.     

Detection of Rotavirus Strains in Freshwater Clams in Japan

Bivalve molluscan shellfish like clams and oysters, etc., are capable to bioaccumulate surrounding contaminants from waters into their digestive systems and posing serious threats of food poisoning. Detection of rotaviruses (RVs) in shellfish is of particular importance because RVs are prone to genome reassortment resulting in the emergence of new RV variants that may compromise vaccine safety. Herein, we have detected the wild-type RVs and Rotarix/RotaTeq vaccine strains in freshwater clams collected on the riverside, Kawasaki city, from July 2019 to January 2020 and correlated the detected genotypes with that of gastroenteritis cases of nearby clinics to understand the transmission of RVs in the environment. The wild-type RVs were detected in 62 (64.6%) out of 96 freshwater clams in every study month: July, September, November, and January that are considered as off-season for RV infections. The most frequent genotypes were G2 (42.9%), G8 (28.6%), G3 (14.3%), G1 (7.1%), and G10 (7.1%), which remained comparable with genotypic distribution found in the clinical samples over the last few years indicating that these RVs may accumulate in clams since a long time. However, G10 genotype was detected in clam but not in clinical samples suggesting the presence of asymptomatic infection or RVs could be carried out from a long distance. Importantly, vaccine strains, RotaTeq (1%) but not Rotarix (0%), were also detected in a clam. Attention must be paid to monitoring the potential transmission of wild-type and vaccine RV strains in the environment to prevent the emergence of new variants generated from genome reassortment with vaccine strains.

     

Delignification of disposable wooden chopsticks waste for fermentative hydrogen production by an enriched culture from a hot spring

Hydrogen(H2) production from lignocellulosic materials may be enhanced by removing lignin and increasing the porosity of the material prior to enzymatic hydrolysis. Alkaline pretreatment conditions,used to delignify disposable wooden chopsticks(DWC) waste, were investigated. The effects of NaOH concentration, temperature and retention time were examined and it was found that retention time had no effect on lignin removal or carbohydrate released in enzymatic hydrolysate. The highest percentage of lignin removal(41%) was obtained with 2% NaOH at 100℃, correlated with the highest carbohydrate released(67 mg/gpretreated DWC) in the hydrolysate. An enriched culture from a hot spring was used as inoculum for fermentative H2 production, and its optimum initial pH and temperature were determined to be 7.0 and 50℃, respectively. Furthermore, enzymatic hydrolysate from pretreated DWC was successfully demonstrated as a substrate for fermentative H2 production by the enriched culture. The maximum H2 yield and production rate were achieved at 195 mL H2/g total sugarsconsumedand 116 mL H2/(L·day), respectively.     

Isolation of antifungal bacteria from Japanese fermented soybeans,natto

An inhibitory effect of a traditional Japanese fermented food, natto, was found against plant pathogens such as Rhizoctonia solani and Fusarium oxysporum, and the bacteria which showed inhibition were isolated from the natto. Among isolated bacteria, BC-1 and GAc exhibited a strong antagonistic effect in vitro against plant pathogens on an agar medium. The supernatant of bacterial culture also showed strong activity against R. solani, which meant the antimicrobial substances were produced and secreted into the medium. Both of the bacteria were estimated as Bacillus amyloliquefaciens from a partial sequence of the 16s rRNA gene. High performance liquid chromatography analysis clearly showed the production of the lipopeptide antibiotic iturin A by BC-1 and GAc.     

Response surface method for modeling the removal of carbon dioxide from a simulated gas using water absorption enhanced with a liquid-film-forming device

This paper presents the results from using a physical absorption process to absorb gaseous CO_2mixed with N_2using water by producing tiny bubbles via a liquid-film-forming device(LFFD)that improves the solubility of CO_2in water.The influence of various parameters—pressure,initial CO_2concentration,gas-to-liquid ratios,and temperature—on the CO_2removal efficiency and its absorption rate in water were investigated and estimated thoroughly by statistical polynomial models obtained by the utilization of the response surface method(RSM)with a central composite design(CCD).Based on the analysis,a high efficiency of CO_2capture can be reached in conditions such as low pressure,high CO_2concentration at the inlet,low gas/liquid ratio,and low temperature.For instance,the highest removal efficiency in the RSM–CCD experimental matrix of nearly 80%occurred for run number 20,which was conducted at 0.30 MPa,CO_2concentration of 35%,gas/liquid ratio of 0.71,and temperature of 15°C.Furthermore,the coefficients of determination,R~2,were 0.996 for the removal rate and 0.982 for the absorption rate,implying that the predicted values computed by the constructed models correlate strongly and fit well with the experimental values.The results obtained provide essential information for implementing this method properly and effectively and contribute a promising approach to the problem of CO_2capture in air pollution treatment.     

Hydroxyl radical concentration profile in photo-Fenton oxidation process: generation and consumption of hydroxyl radicals during the discoloration of azo-dye Orange II

Dynamic behaviors of hydroxyl (OH) radical generation and consumption in photo-Fenton oxidation process were investigated by measuring OH radical concentration during the discoloration of azo-dye Orange II. The effects of operating parameters for photo-Fenton discoloration, i.e. dosages of H₂O₂ and Fe, initial dye concentration, solution pH and UV irradiation, on the generation and consumption of OH radicals playing the main role in advanced oxidation processes were extensively studied. The scavenger probe or trapping technique in which coumarin is scavenger of OH radical was applied to estimate OH radical concentration in the photoreactor during the photo-Fenton discoloration process. The OH radical generation was enhanced with increasing the dosages of Fenton regents, H₂O₂ and Fe. At the initial stage of photo-Fenton discoloration of Orange II, the OH radical concentration rapidly increased (Phase-I) and the OH radical concentration decreased after reaching of OH radical concentration at maximum value (Phase-II). The decrease in OH radical concentration started when the complete discoloration of Orange II was nearly achieved and the H₂O₂ concentration became rather low. The dynamic behavior of OH radical concentration during the discoloration of Orange II was found to be strongly linked with the change in H₂O₂ concentration. The generation of OH radical was maximum at solution pH of 3.0 and decreased with an increase of solution pH. The OH radical generation rate in the Fenton Process was rather slower than that in the photo-Fenton process.     

Estimation Of Selenium Concentration In Shallow Groundwater In Alluvial Fan Area In Tsukui, Central Japan

Total selenium (Se) and water-soluble Se in soil, and Se in a shallow groundwater were hydrogeochemically researched in an alluvial fan area in Tsukui, Central Japan. The water-soluble Se was estimated at average level of 2.6 ± 1.2μg Se kg⁻¹ dry soil (± SD, n = 25), showing less than 1% of the total Se (349–508μg Se kg⁻¹ dry soil) in soil. The monthly Se concentration in groundwater was average 2.2μg,L⁻¹, ranging 1.6–2.4μg,L⁻¹ during 2001–2003. The Se in groundwater significantly decreased with increasing groundwater level after rainfall. This result indicated that Se-bearing water percolated with relatively low Se concentration through the soil layer. According to our prediction model of linear regression curve on the observation data, Se concentration in the groundwater was estimated to be increasing with the very low rate of 4.35 × 10⁻³μg Se L⁻¹,yr⁻¹. The hydrogeochemical research and the result of the prediction model showed that any explosive increase of Se will hardly occur in this groundwater without an anthropogenic Se contamination.     

Trace metal contamination in commercial fish and crustaceans collected from coastal area of Bangladesh and health risk assessment

Environmental Science and Pollution Research - Trace metals contamination in commercial fish and crustaceans have become a great problem in Bangladesh. This study was conducted to determine seven...